Mechanistic insights into the development of optical chloride sensors based on the [9]mercuracarborand-3 ionophore

Fluorescent sensing microspheres based on perhaps the most selective and practically useful chloride ionophore known, the recently reported [9]mercuracarborand-3 (MC-3), have been prepared and optimized for physiological measurements. In initial work, this ionophore was shown to yield functional optical sensing films in combination with an electrically neutral chromoionophore, ETH 5418. Unfortunately, however, these optodes suffered from unacceptably high levels of sodium interference under physiological conditions. To better understand the sensing mechanism, optical and potentiometric binding experiments were used to characterize the stoichiometry and the complex formation constants for this ionophore. It was found that the preferred stoichiometry is 1:2, rather than 1:1 as assumed earlier. The 1:2 complex is extremely stable (logbeta2 = 13.4), but a relatively strong 1:1 complex also exists (log K1 = 9.9). These characteristics were used to fabricate chloride optodes that make use of the stepwise ion-ionophore decomplexation equilibrium, by adding a calculated amount of lipophilic anion exchanger to the polymer film. Such optodes showed dramatically reduced sodium interference while maintaining the excellent selectivity of the traditional formulation. The optimized composition also shifted the measuring range to physiological conditions, making them useful for the assessment of chloride in undiluted and 10-fold-diluted blood at pH 7.4. After necessary alterations of the particle preparation procedure and sensor formulation, the new insights were used to fabricate mass-produced optical sensing microspheres with characteristics essentially identical to those of the optode sensing films.     

The local spatial autocorrelation and the kernel method for identifying black zones. A comparative approach

This article aims to determine the location and the length of road sections characterized by a concentration of accidents (black zones). Two methods are compared: one based on a local decomposition of a global autocorrelation index, the other on kernel estimation. After explanation, both methods are applied and compared in terms of operational results, respective advantages and shortcomings, as well as underlying conceptual elements. The operationality of both methods is illustrated by an application to one Belgian road.     

Ion-pairing ability,chemical stability,and selectivity behavior of halogenated dodecacarborane cation exchangers in neutral carrier-based ion-selective electrodes

Recently, it has been discovered that carba-closo-dodecaborates can be used as cation exchangers in neutral carrier-based ion-selective chemical sensors. Because of their inherent chemical stability and versatile functionalization chemistries, they offer many advantages that may potentially be exploited for ion analyses that require nontraditional sample conditions, including strongly acidic media. In this work, trimethylammonium salts of undecachlorinated (UCC), undecabrominated (UBC), hexabrominated (HBC), and undecaiodinated (UIC) carborane anions were prepared and evaluated for their potential use in solvent polymeric membrane-based sensors. Computational methods including Natural population analysis and electrostatic mapping were used to predict the ion-exchanging ability of each lipophilic anion. In addition, the sandwich membrane technique was used to evaluate the ion-pairing ability of each carborane anion in situ (i.e., within bis(2-ethylhexyl) sebacate (DOS)- and 2-nitrophenyl octyl ether (o-NPOE)-plasticized ISE membranes). The results of the computational and potentiometric studies found that binding affinity of the anions followed the generalized trend HBC > UCC > UBC > UIC. PVC-DOS bulk optode thin films containing the chromoionophore ETH 5315 and a respective anion were used to determine the chemical stability/lipophilicity of the carboranes and tetrakis[3,5-bis(trifluoromethyl)phenyl] borate (TFPB) in acidic media (0.2 M HOAc) under flowing conditions. The studies found that in terms of stability/lipophilicity UIC > UBC > TFPB approximately UCC > HBC. Electrodes containing a Pb(2+)-selective ionophore, tert-butylcalix[4]arene-tetrakis(N,N-dimethylthioacetamide)(lead IV), were used to evaluate the functionality of each cation exchanger. An evaluation of response characteristics such as slope and selectivity found that UIC and UBC were quite comparable to the behavior of TFPB. Interestingly, both UIC and UBC showed a marked selectivity improvement over cadmium, with log K(pot)(pb),(Cd) values of -7.19 and -7.29, respectively, with TFPB giving a value of -5.89. Demonstrating excellent stability and suitable electrostatic properties, the carboranes, UIC in particular, are a very promising alternative to the tetraphenylborates and should find widespread application in the field of chemical sensors.     

Miniaturized electrochemical flow cells

Several novel types of miniaturized electrochemical flow cells are described. The flow cells are fabricated in fluorinated ethylene propylene using a novel technique where channels with inner diameters down to 13 microm are integrated with electrodes. The channel is formed by shrinking and simultaneous melting of a heat shrink/melt tubing around a channel template (a tungsten wire) and electrodes followed by removal of the channel template. The technique allows incorporation of different electrode materials of different sizes. The electrode configuration consists of one or two working electrodes inside the channel and a counter electrode located in the channel outlet reservoir. Electrode configurations with different channel and working electrode sizes, different electrode materials including carbon fibers, glassy carbon rods, poly(tetrafluoroethylene)/carbon composite material, and platinum wires, and different arrangements have been assembled. Hydrodynamic voltammograms in dual-electrode (generator-collector) experiments indicate good potential control for cells with 25-microm channels, while there is some iR drop in cells with 13-microm channels. Cells prepared with a cylindrical working electrode tangent and perpendicular to a flow channel show a flow rate dependence consistent with thin-layer cell behavior. Electrode areas can be made in the range of 10(-10)-10(-8) m2.     

Identification of protein ligands in complex biological samples using intensity-fading MALDI-TOF mass spectrometry

The easy detection of biomolecular interactions in complex mixtures using a minimum amount of material is of prime interest in molecular and cellular biology research. In this work, a mass spectrometry MALDI-TOF based approach, which we call intensity-fading (IF MALDI-TOFMS), and which was designed for just such a purpose, is reported. This methodology is based on the use of the MALDI ion intensities to detect quickly the formation of complexes between nonimmobilized biomolecules in which a protein is one of the partners (protein-protein, protein-peptide, protein-organic molecule, and protein-nucleic acid complexes). The complex is detected through the decrease (fading) of the molecular ion intensities of the partners as directly compared to the MALDI mass spectrum of the mixture (problem and control molecules) following the addition of the target molecule. The potential of the approach is examined in several examples of model interactions, mainly involving small nonprotein and protein inhibitors of proteases, at both the qualitative and semiquantitative levels. Using this method, different protein ligands of proteolytic enzymes in total extracts of invertebrate organisms have been identified in a simple way. The proposed procedure should be easily applied to the high-throughput screening of biomolecules, opening a new experimental strategy in functional proteomics.     

Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles: evaluation of a combined system for particle trace analysis

The resonance and nonresonant laser ionization of uranium atoms sputtered from thin metal films and individual micrometer-size uranium oxide particles, respectively, was studied to evaluate a new setup for the analysis of actinide-containing micrometer-size particles. Experiments using nonresonant (193-nm) ionization of atoms and molecules sputtered from micrometer-size uranium oxide particles have shown that the uranium detection efficiencies for sputtered neutral atoms are approximately 2 orders of magnitude higher than for secondary ions. In uranium particles of 0.5-microm diameter, 6 x 10(6) atoms of 235U were easily detected and the isotopic ratio of 235U/238U = 0.0048 +/- 4.6% is in excellent agreement with the certified value. The use of two-color, two-step resonance ionization of the sputtered neutral uranium atoms from thin films was investigated. Several excitation schemes were tested, and a significant population of several low-lying metastable states after ion sputtering was observed. Autoionizing states for double-resonant ionization were determined, and the high selectivity of ionization schemes involving these autoionizing states was illustrated by comparing the flight-time distributions of different sputtered species obtained both by resonance and nonresonant multiphoton (355-nm) laser postionization. Ideally, the options for resonance as well as nonresonant ionization would be combined in a single setup, to obtain a large gain in sensitivity and selectivity. Thus, information about the main components as well as specific isotopic information of a trace element could be obtained from the same single particle.     

Using speciated isotope dilution with GC-inductively coupled plasma MS to determine and unravel the artificial formation of monomethylmercury in certified reference sediments

Speciated isotope-dilution mass spectrometry (SID-MS) is claimed to be an absolute method; however, it has been found to be affected by artifact monomethylmercury (MMHg) formation in sediments. The determination of MMHg in sediments was carried out by SID-MS after open-focused microwave extraction. The extracted mercury species were then ethylated and separated by capillary gas chromatography (CGC). Isotope ratios (peak area ratios at different masses) were measured by on-line ICP-MS detection of the CGC-separated compounds. Reproducibility of 202Hg/201Hg isotope ratio measurements were 0.60% for MeEtHg and 0.69% for Et2Hg; for 202Hg/199Hg, 0.43 and 0.46%, respectively, were determined. The absolute detection limits for CGC-ICPMS measurements were better than 26 fg for 202Hg, 20 fg for 201Hg, and 24 fg for 199Hg. For the direct determination of MMHg in sediment reference materials (CRM 580, IAEA 356, and IAEA 405), higher values than the certified were always found. Systematic experiments were carried out to localize the sources of the unintentional abiotic methylmercury formation during analysis. Different spiking and derivatization procedures (either ethylation, propylation, or derivatization by Grignard reagents) were tested. In addition, isotopically enriched inorganic mercury was spiked. The amount of inorganic mercury initially present in the sample was found to be the critical factor that should be known and carefully controlled. A simple solvent extraction technique involving no critical cleanup steps was applied in order to reduce high Hg2+ amounts. The method was applied to the determination of MMHg in sediment reference material IAEA-405 with satisfactory results after organic solvent extraction. The limitations of applicability of the proposed method are evaluated as related to inorganic mercury, organic carbon, and sulfur contents. The results obtained confirmed that available sediment reference materials are adequate to achieve traceable mercury speciation analysis and to detect potential sources of MMHg artifact formation.     

Effects of atmospheric ozone on microarray data quality

A data anomaly was observed that affected the uniformity and reproducibility of fluorescent signal across DNA microarrays. Results from experimental sets designed to identify potential causes (from microarray production to array scanning) indicated that the anomaly was linked to a batch process; further work allowed us to localize the effect to the posthybridization array stringency washes. Ozone levels were monitored and highly correlated with the batch effect. Controlled exposures of microarrays to ozone confirmed this factor as the root cause, and we present data that show susceptibility of a class of cyanine dyes (e.g., Cy5, Alexa 647) to ozone levels as low as 5-10 ppb for periods as short as 10-30 s. Other cyanine dyes (e.g., Cy3, Alexa 555) were not significantly affected until higher ozone levels (> 100 ppb). To address this environmental effect, laboratory ozone levels should be kept below 2 ppb (e.g., with filters in HVAC) to achieve high quality microarray data.     

Toxicological screening with formula-based metabolite identification by liquid chromatography/time-of-flight mass spectrometry

An analytical procedure was evaluated for the comprehensive toxicological screening of drugs, metabolites, and pesticides in 1-mL urine samples by TurboIon spray liquid chromatography/time-of-flight mass spectrometry (LC/TOFMS) in the positive ionization mode and continuous mass measurement. The substance database consisted of exact monoisotopic masses for 637 compounds, of which an LC retention time was available for 392. A macroprogram was refined for extracting the data into a legible report, utilizing metabolic patterns and preset identification criteria. These criteria included +/-30 ppm mass tolerance, a +/-0.2-min window for absolute retention time, if available, and a minimum area count of 500. The limit of detection, determined for 90 compounds, was <0.1 mg/L for 73% of the compounds studied and >1.0 mg/L for 6% of the compounds. For method comparisons, 50 successive autopsy urine samples were analyzed by this method, and the results confirmed by gas chromatography/mass spectrometry (GC/MS). Findings for parent drugs were consistent with both methods; in addition, LC/TOFMS regularly revealed apparently correct findings for metabolites not shown by GC/MS. Mean and median mass accuracy by LC/TOFMS was 7.6 and 5.4 ppm, respectively. The procedure proved well-suited for tentative identification without reference substances. The few false positives emphasized the fact that all three parameters, exact mass, retention time, and metabolite pattern, are required for unequivocal identification.     

Using matrix peaks to map topography: increased mass resolution and enhanced sensitivity in chemical imaging

It is well known in secondary ion mass spectrometry (SIMS) that sample topography leads to decreased mass resolution. Specifically, the ion's time of flight is dependent on where it was generated. Here, using matrix-enhanced SIMS, it is demonstrated that, in addition to increasing the yield of intact pseudomolecular ions, the matrix allows the user to semiquantitatively record the topography of a sample. Through mapping the topography-related mass shifts of the matrix (which leads to decreased mass resolution), the analogous mass shifts of higher mass ions can be deconvoluted and higher resolution and greater sensitivity obtained. Furthermore, the semiquantitative topographical map obtained can be compared with any chemical images obtained, allowing the user to quickly ascertain whether local intensity maximums are due to topological features or represent genuine features of interest.