SiC/Si-W-Mo coating for protection of C/C composites at 1873 K

In order to prevent carbon/carbon composites from oxidation at 1873 K, an efficient oxidation protective SiC/Si-W-Mo coating was prepared by a two-step pack cementation technique. The microstructures and the phase composition of the as-received multi-coating were examined by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. It is seen that the compact multi-coating is composed of α-SiC, Si, and （WxMO1-x）Si2. Oxidation test shows that, after oxidation at 1873 K in air for 102 h and thermal cycling between 1873 K and room temperature for 10 times, the weight loss of the SiC/Si-W-Mo coated C/C composites is only 0.26%. The invalidation of the multi-coating is attributed to the formation of penetrable cracks in the coating. 2008 University of Science and Technology Beijing. All rights reserved.     

Silicon assistant carbothermal reduction for SiC powders

The silicon assistant method to increase the reaction yield of carbothermal reduction of silica at a lower temperature is reported. The effect of silicon on the carbothermal reduction process has been investigated in detail. Compared with traditional reduction, the introduction of silicon can change the reaction path and further increase the conversion of silicon carbide at a lower temperature. It is considered that the assistant reduction consists of three steps: vaporizing and melting of silicon, formation of silicon monoxide, and synthesis of silicon carbide. The morphology of the synthesized SiC powders through the silicon assistant method can be affected apparently by the experimental temperature.     

Ultralight X-type lattice sandwich structure (I): Concept,fabrication and experimental characterization

A new type of ultra-lightweight metallic lattice structure (named as the X-type structure) is reported. This periodic structure was formed by two groups of staggered struts in the traditional pyramid structure, and fabricated by folding expanded metal sheet along rows of offset nodes and then brazing the folded structure (as the core) with top and bottom facesheets to form sandwich panels. The out-of-plane compressive and shear properties of the X-type lattice sandwich structure were investigated experimentally and compared to those of the sandwich having a pyramidal truss core. It is found that the formation of the 2-dimensional staggered nodes can effectively make the X-type structure more resistant to inelastic and plastic buckling under both compression and shear loading than the pyramidal lattice truss. Obtained results show that the compressive and shear peak strengths of the X-type lattice structure are about 30% higher than those of the pyramidal lattice truss having the same relative density. Supported by the National Basic Research Program of China (“973” Project) (Grant No. 2006CB601202), the National Natural Science Foundation of China (Grant Nos. 10632060,10825210), the National “111” Project of China (Grant No. B06024) and the National High-Tech Research and Development Program of China (“863” Project) (Grant No. 2006AA03Z519)     

Particle simulation of the failure process of brittle rock under triaxial compression

In order to investigate the failure process of brittle rock under triaxial compression through both experimental and numerical approaches, the particle simulation method was used in numerical simulations and the simulated results were compared with those of the experiment. The numerical simulation results, such as fracture propagation, microcrack distribution, stress-strain response, and damage patterns, were discussed in detail. The simulated results under various confining pressures (0-60 MPa) are in good...     

A spatial orthogonal allocation and heterogeneous cultural hybrid algorithm for multirobot

A spatial orthogonal allocation method is devised for multirobot tasks allocation.A 3D space model is adopted to describe exploration mission;meanwhile spatial orthogonal tentative technology is utilized to update the attractor position for load balance.Heterogeneous interactive cultural hybrid architecture is proposed to solve a robot route planning problem;it utilizes good-point-set to initialize population spaces,redefine novel evolution model and particle evolution ability,and introduce near-neighbor lo...     

An eigenstructure-based 2D DOA estimation method using dual-size spatial invariance array

A sparse planar array vertically placed in y-z plane is proposed to improve the angle estimation accuracy of sources in low angle region with reflection multipath.With two sizes of spatial invariances along both dimensions,the array estimates the azimuth and elevation angles using unitary ESPRIT(estimation of signal parameters via rotational invariance techniques).The first spatial invariance with a displacement of half-wavelength yields unambiguous coarse estimates of high-variance,while the second spatial...     

Super-orthogonal space-time code design based on the trellis diagram integrated operation

By studying the super-orthogonal space-time coding designs for 2 transmit antennas and superquasi orthogonal space-time coding designs for 4 transmit antennas,a novel super-orthogonal space-time coding design for 4 transmit antennas is proposed.By exploiting the inherent structure association between OSTBC and QOSTBC,the proposed schemes can obtain the full-rate and good performance while keeping the coding complexity as super-orthogonal space-time coding schemes for 2 transmit antennas.Simulation results d...     

Asynchronous cooperative communication systems:A survey on signal designs

Cooperative communications is a promising technique for future high speed wireless communications.These systems may be formulated as virtual multi-input multi-output (MIMO) systems where spatial/cooperetive diversity is a key advantage. However,different from MIMO systems,one of the major chal- lenges for cooperative communications systems is that the cooperative transmissions in cooperative systems may be neither time nor frequency synchronized,since the transmissions are from multiple cooperative nodes at...     

基于Agent的电器设备智能测控网络的研究

基于LonWonks的测控网络结构,采用面向Agent的设计思想,结合神经网络和模糊控制的技术特点,提出了一种实现网络电器智能控制的Agent模型。     

Lower estimation of approximation rate for neural networks

Let SFd and Πψ,n,d = { nj=1bjψ(ωj·x+θj) :bj,θj∈R,ωj∈Rd} be the set of periodic and Lebesgue’s square-integrable functions and the set of feedforward neural network (FNN) functions, respectively. Denote by dist (SF d, Πψ,n,d) the deviation of the set SF d from the set Πψ,n,d. A main purpose of this paper is to estimate the deviation. In particular, based on the Fourier transforms and the theory of approximation, a lower estimation for dist (SFd, Πψ,n,d) is proved. That is, dist(SF d, Πψ,n,d) (nlogC2n)1/2 . T...