霸气十足飘韵Purer3.8胆传真版放大器

八达飘韵Purer3.8放大器是一台设计独特的电子管放大器,无论外观设计和工艺还是音质表现都具有相当高的水准,上市后一直深受国内外音响爱好者的好评.而Purer3.8 2006胆传真版技术应用更上一层楼,具备现代高级放大器的所有功能,是一台全方位追求Hi-end的放大器.缺憾是售价也不菲,非一般发烧友所能拥有的.     

基于模板匹配方法的房屋提取

该文提出的方法,使用模板匹配的方式在高分辨率遥感影像中提取房屋.通过对相关系数的调整来实现对相似房屋的提取.实验结果表明该方法提取模板对应及其相似的房屋具有可行性.     

争锋高端——日韩三大旗舰系列液晶电视赏评

曾几何时,价格还高高在上、只有高收入家庭和白领阶层才能拥有的液晶电视,如今价格飞流直下,几乎到了萝卜白菜的水平。但是在琳琅满目的平板电视大卖场,仍有一些卖价令人望而生畏的豪华型液晶电视,这些产品都出自声名显赫的国际大品牌电视厂家,例如夏普的G7系列液晶电视,索尼的X系列液晶电视,三星的F718系列液晶电视。[编者按]     

316LN不锈钢焊接接头的晶间腐蚀

研究了热输入量不同的316LN不锈钢焊接接头在沸腾硝酸溶液中的晶间腐蚀特性,结果表明:焊接热输入量越大,焊接接头的抗晶间腐蚀性能越差;焊接接头焊缝区抗晶间腐蚀能力高于热影响区和母材区;晶间腐蚀过程可分为氧化、钝化、氧化膜裂纹萌生、氧化膜裂纹扩展和高速晶间腐蚀等阶段;在不同阶段声发射信号中氧化信号在20 k Hz的频率位置有能量峰,钝化信号在40 k Hz频率处有明显能量峰的突发型信号,氧化膜裂纹萌生信号在80-100 k Hz的频率段内有明显能量峰的突发型信号,氧化膜裂纹扩展信号具有60 k Hz倍频关系,高速晶间腐蚀信号是一种持续时间稍长的突发型信号,在50 k Hz处有明显的能量峰。     

Time Characterization of High Density Gas Jet from a Pulsed Supersonic Nozzle via Laser Produced Plasma

A high-density gas jet supersonic nozzle is reported in this paper. The jitter and actuation time of the nozzle is determined by the pin discharge and laser spark radiation respectively. The jitter time of the nozzle is within 10μs with the backing pressure as high as 25 bar. With a nanosecond laser pulse focused on the gas jet about 1 mm below the nozzle, the actuation time is calculated to be about 15 ms by detecting the laser produced spark radiation, which reveals the existence of the gas jet and the relative gas density evolving with time. Consequently the gas density is estimated to be well above 10^19 cm^-3, compared with theoretical simulations from the nozzle parameters.     

机械式变比转向器传动比测试系统设计

为满足车辆转向轻便性和灵敏性的统一、改善转向性能,汽车需要采用变传动比转向器.针对机械式变比转向器性能要求,基于转向器总成台架试验国家标准,描述了变传动比测试过程,设计了基于虚拟仪器的传动比测试系统,讨论了传动比测试硬件系统、人机交互界面设计和试验台的搭建与测试.主要运用PCI总线数据采集卡,实现系统输入端驱动、输出端加载和信号采集功能,完成了变比转向器传动比测试.为机械式变比转向器设计方法的验证提供数据依据,具有良好的现实意义.     

由Gibbsite不易獲得奈米級α氧化鋁粉末的原因

本文探讨何以長時間朱,以三水铝石(gibbsite,Al(OH)3)未能成功量産粒徑細于100nm之α-相氧化铝(α-Al2O3)粉末之原因.以三水铝石為原料經熱處理生産α-Al2O3粉末,此水合物會因熱處理而經歷γ-、κ-,而α-相氧化铝中間相之相燮.此過程為一假形相燮(pseudomorphic transformation),也即出现之三結晶相均将維持原料粉末三铝石之外形,因此必須先有＜100nm之三水铝石粉末才有可能産出奈米級α-Al2O3粉末.但因κ-至α-之相燮存在相燮臨界晶徑,＜100nm晶粒κ-Al2O3粉末難连成高比例α-相相燮發生,而長時間熱處理求取高比例相燮又将使粗粒(＞100nm)晶粒或多晶粒體(＞100nm)生成.因此顧然希望直接由三水铝石量産奈米級α-相氧化铝(α-Al2O3)粉末之可能性降低.     

Si-Al-Y Co-deposition Coatings Prepared on Ti-Al Alloy for Enhanced High Temperature Oxidation Resistance

Si-Al-Y co-deposition coatings were prepared on Ti-Al alloy by pack cementation processes at 1 050 ℃ for 4 h with different halide activators in the packs for enhancing the high temperature oxidation resistance of Ti-Al alloy. The structure, constituent phases, formation process and oxidation behavior of the coatings were investigated. The experimental results showed that the coatings prepared respectively with NaF and NH_4Cl as activators were composed of a(Ti, X)_5Si_4,(Ti, X)_5Si_3(X represents Nb and Cr), and TiSi_2 outer layer, a TiAl_2 inner layer and an Al-rich interdiffusion zone. However, the constituent phases changed into TiSi_2 in the outer layer and(Ti, X)_5Si_4 and(Ti, X)_5Si_3 phases were observed in the middle layer of the coating prepared with AlCl_3·6H_2O activator. Among the halide activators studied, the coating prepared with AlCl_3·6H_2O was thicker and denser, which is the only suitable activator for pack Si-Al-Y co-deposition coatings on a Ti-Al alloy. The oxidation results show that the coating can protect the Ti-Al alloy from oxidation at 1000 ℃ in air for at least 80 h. The excellent oxidation resistance of the coating is attributed to the formation of a dense scale mainly consisted of TiO_2, SiO_2 and Al_2O_3.     

“煤粉气化燃烧节能减排技术”的推广应用

能源在国民经济中具有特别重要的战略地位。我国目前能源供需矛盾尖锐、结构不合理;能源利用效率低;一次能源消费以煤为主,化石能源的大量消费造成严重的环境污染。本文根据国家节能减排的精神,介绍了一种煤粉气化燃烧节能减排技术,不仅节约用煤,而且提高了锅炉与窑炉的热效率,具有广阔的应用价值。