双菌株在啤酒发酵中的应用

传统啤酒酿造采用纯种酵母发酵，但使用单一酵母菌种发酵，无论在发酵性能还是在啤酒风味方面都存在一定的局限性。本文阐述了利用两种不同性能的酵母菌种混合发酵，研制出一种具有典型水果香味的淡爽型啤酒，同时解决了发酵过程中采用高辅料比时双乙酰还原慢、发酵度偏低及酵母凝聚性差等问题，从而起到优势互补的作用。     

新型复合调味料的生产与配方

复合调味料是我国近几年发展起来的一种方便调味食品,品种丰富,味道鲜美,使用方便,深受广大用户欢迎。 复合调味料生产大多以天然动植物为原料,配以多种调味品科学配制而成,大多为粉状品。生产基本工艺天然食物或加工食物→粉末化→过筛→配调味品料→产品→包装 根据天然食物原料不同,调味品及配方亦异,现介绍数例如下     

β-Galactosidase with transgalactosylation activity from Lactobacillus fermentum K4

The LacLM β-galactosidase of Lactobacillus fermentum K4 is encoded by 2 consecutive genes, lacL (large subunit) and lacM (small subunit), that share 17 overlapping nucleotides. Phylogenetic analysis revealed that this enzyme was closely related to other Lactobacillus β-galactosidases and provided significant insight into its common and distinct characteristics. We cloned both the lacL and lacM genes of L. fermentum K4 and heterologously expressed each in Escherichia coli, although the recombinant enzyme was only functional when both were expressed on the same plasmid. We evaluated the enzymatic properties of this species-specific LacLM β-galactosidase and discovered that it acts as both a hydrolase, bioconverting lactose into glucose and galactose, and a transgalactosylase, generating prebiotic galacto-oligosaccharides (GOS). The recombinant β-galactosidase showed a broad pH optimum and stability around neutral pH. The optimal temperature and Michaelis constant (K_m) for the substrates o-nitrophenyl-β-d-galactopyranoside and lactose were, respectively, 40°C and 45 to 50°C and 1.31 mM and 27 mM. The enzyme activity was stimulated by some cations such as Na⁺, K⁺, and Mg²⁺. In addition, activity was also enhanced by ethanol (15%, wt/vol). The transgalactosylation activity of L. fermentum K4 β-galactosidase effectively and rapidly generated GOS, up to 37% of the total sugars from the reaction. Collectively, our results suggested that the β-galactosidase from L. fermentum K4 could be exploited for the formation of GOS.     

南水北调东线工程的排污现状与防治措施

通过对南水北调东线工程的水质污染现状和主要污染物的分析,提出了为满足输水水质要求而需要采取的措施和建议,同时对尚存的问题进行了讨论。     

High intergrain critical current density in fine-grain (Ba0.6K0.4)Fe2As2 wires and bulks

The K- and Co-doped BaFe(2)As(2) (Ba-122) superconducting compounds are potentially useful for applications because they have upper critical fields (H(c2)) of well over 50?T, H(c2) anisotropy γ < 2and thin-film critical current densities J(c) exceeding 1?MA?cm(-2) (refs 1-4) at 4.2?K. However, thin-film bicrystals of Co-doped Ba-122 clearly exhibit weak link behaviour for [001] tilt misorientations of more than about 5°, suggesting that textured substrates would be needed for applications, as in the cuprates. Here we present a contrary and very much more positive result in which untextured polycrystalline (Ba(0.6)K(0.4))Fe(2)As(2) bulks and round wires with high grain boundary density have transport critical current densities well over 0.1?MA?cm(-2) (self-field, 4.2?K), more than 10 times higher than that of any other round untextured ferropnictide wire and 4-5 times higher than the best textured flat wire. The enhanced grain connectivity is ascribed to their much improved phase purity and to the enhanced vortex stiffness of this low-anisotropy compound (γ~1-2) when compared with YBa(2)Cu(3)O(7-x) (γ~5).     

Large-scale fabrication of bioinspired fibers for directional water collection

Spider-silk inspired functional fibers with periodic spindle-knots and the ability to collect water in a directional manner are fabricated on a large scale using a fluid coating method. The fabrication process is investigated in detail, considering factors like the fiber-drawing velocity, solution viscosity, and surface tension. These bioinspired fibers are inexpensive and durable, which makes it possible to collect water from fog in a similar manner to a spider's web.     

Application of selective implantation in Al0.5Ga0.5As/In0.25Ga0.75As/GaAs pseudomorphic single quantum wire structures

A pseudomorphic Al0.5Ga0.5As/In0.25Ga0.75As/GaAs asymmetric quantum wire (QWR) structure was grown on GaAs V-grooved substrate by low pressure metal organic vapor phase epitaxy. The formation of crescent shaped QWRs at the bottom of the V-grooves was confirmed by both transmission electron microscopy and photoluminescence (PL) spectra. The temperature dependence of PL spectra demonstrated a fast decrease of the sidewall quantum well PL intensity with increasing temperature, which originates from relaxation of carriers from well to wire region. The self-aligned dual implantation technique was successfully used to selectively disable the adjacent quantum structures. Decrease of the PL intensity of QWR at 8 K was observed after selective implantation, which resulted from a decreased number of carriers relaxed from adjacent quantum structures.     

抗氧剂KY-60的精制研究

KY-60即4,4,-亚甲撑双(2,6-二叔丁基苯酚),是多种合成树脂的优异的抗氧剂,其相容性好,抗氧效能高,挥发性小,对制品无污染,无毒,不着色,对热、氧、龟裂老化有极好的防护作用;尤其是对日光下的橡胶制品老化起了最大的防护效能,对硫化和可塑度均无影响,使用方便,可以与多种辅助抗氧剂、稳定剂配用,具有明显的增效作用。目前国内对KY-60的研究工作已完成了实验室合成,针对KY60生产中产品粒度小、分布不均匀、纯度低、用户使用不便等问题,重结晶作为整个工作的关键一步,为此对KY60结晶过程进行了大量的研究。     

Continuous carbon nanotube reinforced composites

Carbon nanotubes are considered short fibers, and polymer composites with nanotube fillers are always analogues of random, short fiber composites. The real structural carbon fiber composites, on the other hand, always contain carbon fiber reinforcements where fibers run continuously through the composite matrix. With the recent optimization in aligned nanotube growth, samples of nanotubes in macroscopic lengths have become available, and this allows the creation of composites that are similar to the continuous fiber composites with individual nanotubes running continuously through the composite body. This allows the proper utilization of the extreme high modulus and strength predicted for nanotubes in structural composites. Here, we fabricate such continuous nanotube polymer composites with continuous nanotube reinforcements and report that under compressive loadings, the nanotube composites can generate more than an order of magnitude improvement in the longitudinal modulus (up to 3,300%) as well as damping capability (up to 2,100%). It is also observed that composites with a random distribution of nanotubes of same length and similar filler fraction provide three times less effective reinforcement in composites.     

Ultralow feeding gas flow guiding growth of large-scale horizontally aligned single-walled carbon nanotube arrays

On the basis of the rational analysis about the fluidic property of the system, an ultralow gas flow chemical vapor deposition (CVD) strategy was designed to prepare large-scale horizontally aligned ultralong single-walled carbon nanotube (SWNT) arrays. SWNT arrays could be well obtained under extremely low feeding flow of 1.5 sccm in a 1 in. quartz tube reactor. It was confirmed that the tubes grew floatingly and could cross microtrenches or climb over micro-obstacles in ultraslow gas flow. SWNTs arrays also could be formed no matter the substrate was placed vertically or upside down. The growth mechanism was discussed. Both the buoyancy effect induced by gas temperature/density difference and gas flow stability played dominant roles. More attractively, simultaneous batch-scale preparation of SWNT arrays was realized by the ultralow gas flow strategy. This new strategy turns to be more abstemious, efficient, promising, and flexible compared with the high gas flow rate fast-heating CVD processes.