Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

The natural killer cell receptor specific for HLA-A allotypes: a novel member of the p58/p70 family of inhibitory receptors that is characterized by three immunoglobulin-like domains and is expressed as a 140-kD disulphide-linked dimer

Human natural killer (NK) cells express inhibitory receptors that are specific for different groups of HLA-C or HLA-B alleles. The majority of these receptors belong to the immunoglobulin (Ig) superfamily and are characterized by two or three extracellular Ig-like domains. Here we describe a novel inhibitory NK receptor that is specific for a group of HLA-A alleles. The HLA-A3-specific NK cell clone DP7 has been used for mice immunization. Two mAbs, termed Q66 and Q241, bound to the immunizing clone and stained only a subset of NK cell populations or clones. Among Q66 mAb-reactive clones, we further selected those that did not express any of the previously identified HLA-class I-specific NK receptors. These clones did not lyse HLA-A3+ (or -A11+) target cells, but lysis of these targets could be detected in the presence of Q66 or Q241 mAbs. On the other hand, target cells expressing other HLA-A alleles, including -A1, -A2, and -A24, were efficiently lysed. Moreover, none of the HLA-C or HLA-B alleles that were tested exerted a protective effect. Q66+, but not Q66- NK cell clones, expressed messenger RNA coding for a novel 3 Ig domain protein homologous to the HLA-C (p58) and HLA-B (p70) receptors. The corresponding cDNA (cl.1.1) was used to generate transient and stable transfectants in COS7 and NIH3T3 cell lines, respectively. Both types of transfectants were specifically stained by Q66 and Q241 mAbs. Since the cytoplasmic tail of Q66-reactive molecules was at least 11 amino acid longer than the other known p58/p70 molecules, we could generate an antiserum specific for the COOH-terminus of Q66-reactive molecules, termed PGP-3. PGP-3 immunoprecipitated, only from Q66+ NK cells, molecules displaying a molecular mass of 140 kD, under nonreducing conditions, which resolved, under reducing conditions, in a 70-kD band. Thus, differently from the other p58/p70 receptors, Q66-reactive molecules appear to be expressed as disulphide-linked dimers and were thus termed p140. The comparative analysis of the amino acid sequences of p58, p70, and p140 molecules revealed the existence of two cysteins proximal to the transmembrane region, only in the amino acid sequence of p140 molecules.     

Central sleep apnea

A central sleep apnea is the absence of respiratory effect, and, thus, the absence of airflow during sleep. Central hypopnea, a related disorder, is also discussed. The sensory component of central sleep apnea; defects involving the integrative and executive neurons; non-neurologic causes of central sleep apneas, including chronic obstructive pulmonary disease and congestive heart failure; diagnosis; treatment; and other topics are reviewed in detail.     

Extinction of dispersed heterogeneous systems

We consider extinction of various dispersed systems. Isolated boron particles and boron particles in gases are studied. Stability analysis of steady-state thermal regimes of reacting heterogeneous systems for the case of two parallel reactions on the reaction surface using the Frank-Kamenetskii method gives extinction conditions in oxygen-containing media. Curves of the extinction particle size versus the ambient temperature, oxidizer concentration, and, for particles in gases, also versus the oxidizer-to-fuel ratio are plotted. Approximate analytical calculations showed that the extinction process can be most actively controlled by varying the combustion temperature: a decrease in the latter increases the extinction particle size and decreases the completeness of fuel combustion. It is shown that at low ambient temperatures the extinction particle size for suspensions is larger than that for isolated particles. This effect is caused by a decrease in the oxidizer concentration during combustion of suspensions. At high temperatures, the role of this factor weakens.Translated from Fizika Goreniya i Vzryva, Vol. 32, No. 6, pp. 12–19, November–December, 1996.     

Evaluation of factors influencing platelet aggregation in patients with chronic glomerulonephritis (CGN)

Platelets (PLT) play an important role in hemostasis, modulation of immunological and inflammatory processes. There is also evidence that PLT takes part in the development of atherosclerosis and glomerulosclerosis. The aim of presented study was to determine morphological and functional changes of platelets and their relation to the lipid, protein and coagulation factors disturbances in patients with chronic glomerulonephritis (CGN). The studies were carried out in 60 patients with CGN diagnosed by renal biopsy: 30 patients without nephrotic syndrome (NS)-CGN and 30 patients with NS-CGN+NS. Protein and lipid disturbances, coagulation factors were estimated using routine laboratory methods. Platelet count (PLT), mean platelet volume (MPV) and modal platelet volume (PLT-Mode) were measured using Technicon H1 hematological autoanalyser. Platelet function was assessed by aggregometry using turbidimetric method (inductors: ADP 1-3 microM, collagen 50g/ml, epinephrine 0.25-5 microM). Spontaneous platelet aggregation (SPA) was measured in platelet rich plasma (PRP) without inductors for 15 min, in 1-2 hours after venesection. SPA was observed in 9 of 30 patients with CGN and in 19 of 30 patients with CGN+NS. MPV and PLT Mode were significantly higher in patient showing SPA compared with those without. Significant correlations between SPA and the concentration of plasma albumin (r = -0,70; p < 0.02) TG and CH-LDL (r = 0,61; p < 0.05) were found in CGN+NS patients. APTT was significantly shorter in patients showing SPA compared with those without and negative significant correlation between SPA and APTT was found. Platelet aggregation to inductors in CGN and CGN+NS patients was diminished compared with control group. Lack of second phase aggregation in response to aggregation inducers was observed in patients with SPA. Conclusions. 1. Platelet hyperaggregation play an important role in hypercoagulation state in CGN patients. 2. SPA in vitro was observed in majority of CGN+NS patients and in some without NS. 3. Pathomechanism of SPA is probably multifactorial (hypoalbuminemia, dyslipidemia, changes in concentration of coagulation parameters).     

A preliminary analysis of the biomass energy production potential in Africa in 2025 considering projected land needs for food production

This paper provides a preliminary examination of present and projected land use in Africa to estimate the potential availability of land in 2025 for use in producing biomass energy. Fifty countries are included in the analysis. Future cropland requirements are projected on the basis of average African cereal crop yield improvements since 1972, and minimum nutritional requirements are assumed to be met in 2025 without increasing imports above present absolute levels. Cropland, natural forests and other wilderness areas are excluded from consideration for biomass energy use. Woody biomass energy yields are estimated on the basis of nationally averaged precipitation, using a yield-precipitation correlation for commercial eucalyptus plantations in Brazil. The total African bioenergy production potential in 2025 is estimated to be about 18 EJ per year for a set of baseline assumptions that includes planting only 10% of the available non-crop, non-forest, non-wilderness area with biomass energy crops. A preliminary cost assessment suggests that much of this biomass could be produced for $1–2 GJ⁻¹. A number of uncertainties in the modelling assumptions are examined through a sensitivity analysis. Despite limitations in the model used here, one robust conclusion is that Africa as a whole has a significant biophysical potential for producing biomass energy. This result suggests that more detailed country and sub-country level assessments would be worthwhile to understand better the practical prospects for future biomass energy production in Africa.     

Nickel/microcapsules composite electrocoatings; the synthesis of water-containing microcapsules and preparation of the coatings

Composite coatings, the product of electrolytic codeposition of solid particles in a metallic matrix have been developed and utilized in industry as wear resistant coatings. The work described in this paper concerns the development of water-containing metallic coatings prepared by the electrolytic codeposition of water-containing microcapsules from nickel Watts plating baths under pulse reversed current conditions. The water-containing polystyrene microcapsules employed in the codeposition experiments were produced by the complex emulsion/solvent evaporation technique. The influence of the use of two types of stabilizers on the size and the surface chemistry of the microcapsules is discussed. The microcapsules prepared in both cases are rigid spheres with compact walls and a smooth surface. The different stabilizers showed a significant influence on the dispersability of the capsules in the plating solution and their codeposition behaviour. The codeposition experiments carried out with the use of a rotating disc electrode revealed the influence of the plating parameters on the incorporation procedure and on the quality of the composite electrodeposits.     

Melt-extracted oxide ceramic fibres — the fundamentals

A melt-extraction technique, using a sharpened molybdenum wheel, has been used to produce fine oxide ceramic fibres. Wetting of the molybdenum wheel by molten ceramic is a key parameter in the melt-extraction process. Two types of fibre are generally obtained, depending on the extraction speed. At very low wheel speed, fine and uniform fibres of high quality are produced. However, when the wheel speed exceeds a critical velocity, Rayleigh waves are formed on the free surface of the fibres. Moreover, the average fibre thickness first increases with the wheel velocity, then passes through a maximum, decreasing at high velocity. This thickness variation is discussed in terms of both surface tension and viscosity of the liquid ceramics.