Prevalence and dissemination of Salmonella serotypes along the slaughtering process in Brazilian small poultry slaughterhouses

Salmonella is the leading cause of human foodborne infections in Latin America, and poultry meat is one of the main vehicles. Small poultry slaughterhouses (fewer than 200 birds slaughtered per day) represent an important economic activity in certain regions. The slaughtering process in these abattoirs is manual and rudimentary, and frequently the hygienic conditions are poor. This study reports results of a detailed evaluation of the prevalence of Salmonella serotypes in carcasses, utensils, and environmental samples collected in 60 small Brazilian slaughterhouses. In the second step of the study, one of these slaughterhouses was selected to monitor the dissemination of Salmonella along the slaughtering process. For testing, conventional procedures were used: preenrichment in buffered peptone water (35 degrees C for 24 h), selective enrichment in Selenite-cystine (35 degrees C for 24 h), tetrathionate and Rappaport-Vassiliadis broths (42 degrees C for 24 h), plating on bismuth-sulfite and brilliant green agars (35 degrees C for 24 h), proper biochemical testing, and complete serotyping. Forty-one percent of samples harbored Salmonella spp., including 42% of carcasses, 23.1% of utensils, 71.4% of water, and 71.4% of freezers and refrigerators. Seventeen serotypes were detected. Salmonella Enteritidis predominated (30%), followed by Salmonella Albany (12%), Salmonella Hadar (12%), Salmonella Indiana (10%), and I 4,12:z:- (8%). All samples collected along the slaughtering process in the selected slaughterhouse were Salmonella positive. Five serotypes were detected, including Salmonella Albany, Salmonella Hadar, Salmonella Agona, Salmonella Emek, and Salmonella Indiana. More than 30% of the samples contained more than one serotype, and 12.5% presented three serotypes. The widespread occurrence of Salmonella in small slaughterhouses reinforces the need for implementation of effective control measures.     

Proliferation/differentiation of osteoblastic human alveolar bone cell cultures in the presence of stainless steel corrosion products

Human osteoblastic alveolar bone cells were cultured for 28 days in control conditions and in the presence of three non-lethal concentrations of AISI 316L stainless steel (SS) corrosion products. Cells were exposed to SS corrosion products in two experimental situations: (i) in selected stages of the incubation time (during the first, second, third and fourth week of culture); and (ii) during the 28 days incubation period. Cultures were characterized for cell proliferation, total protein content, alkaline phosphatase activity (ALP) and ability to form mineralized deposits; culture media was analyzed for ionized calcium (Ca) and phosphorus (P) concentrations throughout the incubation period. The presence of SS corrosion products during the different stages of the incubation period did not significantly affect the cell proliferation; however, a significant dose-dependent deleterious effect was observed on the levels and pattern of ALP activity, concentration of ionized Ca and P in the culture medium and, also, ability to form mineralized deposits, especially in cultures exposed during the first and second week of culture (respectively, lag phase and exponential cell growth phase). Similar effects were observed in cultures exposed to the SS corrosion products during the 28 days incubation period. However, the presence of such products during the third week (when the mineralization process occurs) and, also, during the fourth week, resulted in little or no significant effects on the behavior of alveolar bone cells. Results suggested that SS corrosion products above certain non-lethal concentrations may disturb the proliferation/differentiation relationship of osteoblastic human alveolar bone cell cultures. ©©2000 Kluwer Academic Publishers     

Induction of apoptosis and apoptotic mediators in balb/C splenic lymphocytes by dietary n−3 and n−6 fatty acids

The present study was designed to investigate the effect of diatery n−6 and n−3 polyunsaturated fatty acids (PUFA) on anti-CD3 and anti-Fas antibody-induced apoptosis and its mediators in mouse spleen cells. Nutritionally adequate semipurified diets containing either 5% w/w corn oil (n−6 PUFA) or fish oil (n−3 PUFA) were fed to weanling female Balb/C mice, and 24 wk later mice were sacrificed. In n−3 PUFA-fed mice, serum and splenocyte lipid peroxides were increased by 20 and 28.3% respectively, compared to n−6 PUFA-fed mice. Further, serum vitamin F levels were decreased by 50% in the n−3 PUFA-fed group, whereas higher anti0Fas- and anti-CD3-induced apoptosis (65 and 66%) and necrosis (17 and 25%), compared to the n−6 PUFA-fed group, were found when measured with Annexin V and propidium iodide staining, respectively. In addition, decreased Bcl-2 and increased Fas-ligand (Fas-L) also were observed in the n−3 PUFA-fed group compared to the n−6 PUFA-fed group. No difference in the ratio of splenocyte subsets nor their Fas expression was observed between the n−3 PUFA-fed and n−6 PUFA-fed groups, whereas decreased proliferation of splenocytes was found in n−3 PUFA-fed mice compared to n−6 PUFA-fed mice. In conclusion, our results indicate that dietary n−3 PUFA induces higher apoptosis by increasing the generation of lipid peroxides and elevating Fas-L expression along with decreasing Bcl-2 expression. A reduced proliferative response of immune cells also was observed in n−3 PUFA-fed mice.     

Medium term observation of shiprepair and shipbuilding docks

This paper describes the observation of the structural behaviour of two of the largest docks in the world, the Setenave docks, as well as the experimental techniques developed by LNEC for observing this type of structures. This work was considered of fundamental importance not only for checking the safety conditions of the dock structural behaviour, but also for the progress of design methods of these structures, especially as concerns the interaction between soil, piles and bottom slabs. In accordance with the programme of observation, we had the opportunity to appreciate the behaviour of the sunk docks under the following conditions: during the elevation of the ground-water level, which had been lowered for the construction of the docks; during successive filling and emptying operations in docks for the repair of several ships; and also during the simultaneous flooding of the two docks up to the level +4.2 m above the land area for the launching of a ship constructed in the shipbuilding dock.

---

Résumé Cet article rend compte de l'observation du comportement de deux des docks les plus importants du monde, les docks Setenave, ainsi que des techniques expérimentales mises au point par le LNEC pour l'observation de ce type de structure. Cette étude a été considérée comme étant d'une importance fondamentale non seulement pour vérifler les conditions de sécurité du comportement structurel des docks mais aussi pour le progrès des méthodes de conception de ce type de structure, particulièrement en ce qui concerne l'interaction entre le sol, les piliers et les dalles de fondation. En correspondance avec ce programme d'observation, on a pu estimer le comportement des docks immergés dans les conditions suivantes: au cours de l'élévation du niveau de l'eau souterraine qui avait été abaissé pour la construction des docks; au cours des opérations de remplissage et de vidage successives des docks pour la réparation des navires; également au cours du remplissage simultané des deux docks jusqu'au niveau+4.2 m au-dessus du sol pour le lancement d'un navire dans le dock de construction.

     

Congruence in the performance of model nitrifying activated sludge plants located in Germany,Scotland and Spain

A laboratory model nitrifying activated sludge plant treating OECD synthetic sewage was designed and constructed by each of three laboratories in Germany, Scotland and Spain in order to produce a sludge inoculum for 5 rapid toxicity bioassays. The plants were run for 3 years and produced sludge for the microbially based bioassays Vibrio fischeri bioluminescence, ATP luminescence and respiration, and, nitrification and enzyme inhibition. Although the initial sludge inoculum for the plants differed, as did some of the running conditions such as temperature regime, the sludge produced within the different countries had similar characteristics with respect to sludge age, total suspended solids and volatile suspended solids. Nitrification was generally maintained over the 3-year period although there were occasions when the process was inconsistent. Nitrification recovery was afforded by reseeding with a nitrifying sludge from a local wastewater treatment works (WWTW) or imposition of starvation conditions for a period of time. The sludge produced was used to carry out toxicity testing and results compared well with those using sludge from a WWTW. Overall, the use of sludge generated in the laboratory could be used for toxicity testing negating the need to resort to the use of natural WWTW sludge, which may contain a range of toxic substances due to uncontrolled industrial and domestic inputs and an unbalanced microbial consortium.     

Influence of the preparation method on the physicochemical properties of tolbutamide/cyclodextrin binary systems

Tolbutamide (TBM) was found to form an inclusion complex with beta cyclodextrin (beta-CD) in solution and in solid state. Inclusion complex formation between tolbutamide and beta-cyclodextrin in aqueous solution was studied by phase solubility and spectral shift methods. The apparent stability constant Ks calculated by these techniques, in water, were estimated as 195.7 and 236.5 M(-1), respectively. The phase solubility studies revealed a B(S)-type diagram with an inclusion complex of 1:2 molar ratio. The solid inclusion complexes of TBM and beta-CD were prepared at a molar ratio of 1:2 by kneading, coprecipitation, freeze-drying, and spray-drying methods. In addition, the physical mixture was prepared. Characterization of TBM: beta-CD inclusion was performed using differential scanning calorimetry (DSC), Raman spectroscopy, and X-ray diffractometry and by application of a so-called ether wash method. All the inclusion systems investigated led to a significant improvement in the dissolution over free TBM, and the dissolution rate of the active material was observed to be independent of the preparation method.     

The Effect of Mismatches and Delay on the Quadrature Error of a Cross-Coupled Relaxation Oscillator

Cross-coupled relaxation oscillators can produce two highly accurate quadrature output signals (Verhoeven, 1992). We present a high-level model of these oscillators in terms of circuit parameters, from which we obtain explicit equations for duty-cycle, oscillation frequency, and quadrature error. They show the influence on the oscillator performance of component mismatches and other nonideal effects, such as delays. The results provide useful guidelines for the design of high performance oscillators. The theoretical results are confirmed by simulation and by measurements on a test chip.     

Dual-band CMOS low-noise amplifier without switches and with continuously adjustable gain

A dual-band CMOS low-noise amplifier with inductor magnetic coupling and current steering is presented which avoids the use of switches in the signal path, and has the possibility of controlling the voltage gain in the two bands, without disturbing the input impedance matching.     

Identification of material parameters for thin sheets from single biaxial tensile test using a sequential inverse identification strategy

An inverse analysis methodology to simultaneously identify the parameters of various anisotropic yield criteria together with isotropic work-hardening models of metal sheets is outlined. This identification makes use of results of the cruciform biaxial test, i.e., the evolution of the force during the test, for the two axes of the sample, and the major and minor strain distributions along both axes, at a given moment during the test. Based on a study of the sensitivity of the constitutive parameters to the biaxial tensile test results, the inverse identification consists on a procedure that sequentially minimises the gap between experimental and numerical results. Each step of the sequence uses a distinct cost function according to the type of results to be minimised, using a gradient-based optimisation algorithm, the Levenberg-Marquardt method. The inverse methodology allows for the identification of constitutive parameters of complex constitutive models. This sequential identification strategy is compared to a strategy based on a single cost function, involving all parameters and type of results, which has lower performance.     

Nonlinear model predictive control of biodiesel production via transesterification of used vegetable oils

The economic performance of an industrial scale semi-batch reactor for biodiesel production via transesterification of used vegetable oils is investigated by simulation using nonlinear model predictive control (NMPC) technology. The objective is to produce biodiesel compliant to the biodiesel standards at the minimum costs. A first-principle model is formulated to describe the dynamics of the reactor mixture temperature and composition. The feed oil and mixture composition are characterized using a pseudo-component approach, and the thermodynamic properties are estimated from group contribution methods. The dynamic model is used by the NMPC framework to predict the optimal control profiles, where a multiple shooting based dynamic optimization problem is solved at every sampling time. Simulation results with the economic performance of an industrial scale semi-batch reactor are presented for control configurations manipulating the methanol feed flow rate and the heat duty.