Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Dynamic fatigue behaviour of a steatite ceramic

Dynamic fatigue of a low dielectric loss steatite was investigated. To this end, the values of n and B, the so‐called subcritical crack growth (SCG) parameters were experimentally determined. The steatite exhibited the expected dynamic fatigue behaviour, so that the stress corrosion susceptibility parameter, n, of 24 was obtained. In addition, the material/environment parameter B, which is a constant for a given test environment, was also attained. These parameters are instrumental in predicting the lifetime of components under stress. When the applied load is such that the resulting strength equals half of the inert strength (σ_i), defined as the strength of a sample tested in an inert environment or at a fast stress rate, i.e. where no subcritical crack growth occurs, the time to failure (t_f) of the material was found to be ～140 h. Measurement of the fracture toughness of steatite is also of upmost importance and so it was determined using three test methods. A value of K_Ic = 1.91 ± 0.29 MPa m^1/2 was attained by the indentation fracture method through measurement of the cracks emanating from the Vickers indentation. This value is in good agreement with those determined using the K_Isc (surface crack in flexure) test method (2.21 ± 0.07 MPa m^1/2) and fractography analysis test method (2.00 ± 0.44 MPa m^1/2). Differences in test procedure and analysis causing the values from each test method to be different are discussed.     

Diagnostic value of nasal provocation testing and rhinomanometry in allergic rhinitis

Assessment of the hemodynamic and anatomic results following balloon angioplasty of discrete native coarctation of the aorta, with particular attention to "remodeling," has required repeat cardiac catheterization and angiography, which is invasive and has limited resolution. Eight patients with hypertension and discrete native coarctation with an otherwise normally developed aortic arch underwent angioplasty at 5.0 +/- 6.8 years of age. Angiographic cross-sectional areas of the aorta indexed to body surface area at the isthmus (I), coarctation site (C), and 1 cm distal to the coarctation site (Cd) pre- and postangioplasty were compared with MRI-indexed cross-sectional areas 18 +/- 10 months (MRI-1) and 35 +/- 11 months (MRI-2) postangioplasty. From preangioplasty to MRI-2, the isthmus was smaller (149 +/- 22 versus 127 +/- 27 mm2/m2; p < 0. 05). The coarctation site was larger postangioplasty (25 +/- 9 versus 116 +/- 40 mm2/m2; p < 0.001) with continued growth at latest follow-up (116 +/- 40 versus 164 +/- 36 mm2/m2; p < 0.01). The segment 1 cm distal to the coarctation site continued to decrease in area at latest follow-up (267 +/- 78 versus 163 +/- 38 mm2/m2; p < 0. 001). I versus C versus Cd at MRI-2 were similar, whereas postangioplasty and MRI-1 cross-sectional area measurements were significantly different. Following angioplasty of discrete native coarctation, the aorta becomes more uniform or undergoes "remodeling." Noninvasive MRI is an effective means of evaluating the anatomic result following balloon angioplasty, obviating the need for repeated invasive cardiac catheterizations.     

Shortcut fusion rules for the derivation of circular and higher-order programs

Functional programs often combine separate parts using intermediate data structures for communicating results. Programs so defined are modular, easier to understand and maintain, but suffer from inefficiencies due to the generation of those gluing data structures. To eliminate such redundant data structures, some program transformation techniques have been proposed. One such technique is shortcut fusion, and has been studied in the context of both pure and monadic functional programs. In this paper, we study several shortcut fusion extensions, so that, alternatively, circular or higher-order programs are derived. These extensions are also provided for effect-free programs and monadic ones. Our work results in a set of generic calculation rules, that are widely applicable, and whose correctness is formally established.     

Traffic analysis and synthetic models of second life

Virtual Worlds (VW), such as Massive Multiplayer Online Social Games, have been gaining increasing attention in the last few years, mainly due to the new way users interact with them. However, little effort has been devoted to understand their traffic profile and the implications to the traffic management area. With the current growing rate of VWs’ usage, their traffic demand could eventually impose a significant burden on the operation of a typical Internet Service Provider (ISP) network. In this paper, we seek to understand the traffic behavior of an increasingly popular VW application, namely Second Life (SL), from both the connection and network level perspectives. We also show results of a traffic analysis of a SL client, when an avatar performs different actions in the VW, at different places and under different network conditions. Our results show that SL makes intensive use of network resources (mostly bandwidth), since the capacity needed for having a full SL experience (listening to live music) may reach 500 kbps. We then extend the traffic analysis work on SL by providing analytical models for its traffic profile. We aim at helping the network management and planning area to estimate the impact of an intense use of such VW on access links or core networks. Such synthetic models are also useful to the networking research community for the use in network simulations.     

Exploring educational immersive videogames: an empirical study with a 3D multimodal interaction prototype

ABSTRACT

Gestural interaction devices emerged and originated various studies on multimodal human–computer interaction to improve user experience (UX). However, there is a knowledge gap regarding the use of these devices to enhance learning. We present an exploratory study which analysed the UX with a multimodal immersive videogame prototype, based on a Portuguese historical/cultural episode. Evaluation tests took place in high school environments and public videogaming events. Two users would be present simultaneously in the same virtual reality (VR) environment: one as the helmsman aboard Vasco da Gama’s fifteenth-century Portuguese ship and the other as the mythical Adamastor stone giant at the Cape of Good Hope. The helmsman player wore a VR headset to explore the environment, whereas the giant player used body motion to control the giant, and observed results on a screen, with no headset. This allowed a preliminary characterisation of UX, identifying challenges and potential use of these devices in multi-user virtual learning contexts. We also discuss the combined use of such devices, towards future development of similar systems, and its implications on learning improvement through multimodal human–computer interaction.     

The effect of the temporal resolution of NDVI data on season onset dates and trends across Canadian broadleaf forests

Satellite remote sensing has the potential to contribute to plant phenology monitoring at spatial and temporal scales relevant for regional and global scale studies. Historically, temporal composites of satellite data, ranging from 8 days to 16 days, have been used as a starting point for satellite-derived phenology data sets. In this study we assess how the temporal resolution of such composites affects the estimation of the start of season (SOS) by: 1) calibrating a relationship between satellite derived SOS with in situ leaf unfolding (LU) of trembling aspen (Populus tremuloides) across Canada and 2) quantifying the sensitivity of calibrated satellite SOS estimates and trends, over Canadian broadleaf forests, to the temporal resolution of NDVI data. SOS estimates and trends derived from daily NDVI data were compared to SOS estimates and trends derived from multiday NDVI composites that retain the exact date of the maximum NDVI value or that assume the midpoint of the multiday interval as the observation date. In situ observations of LU dates were acquired from the PlantWatch Canada network. A new Canadian database of cloud and snow screened daily 1-km resolution National Oceanic and Atmospheric Administration advanced very high resolution radiometer surface reflectance images was used as input satellite data. The mean absolute errors of SOS dates with respect to in situ LU dates ranged between 13 and 40 days. SOS estimates from NDVI composites that retain the exact date of the maximum NDVI value had smaller errors (~ 13 to 20 days). The sensitivity analysis reinforced these findings: SOS estimates from NDVI composites that use the exact date had smaller absolute deviations from the LU date (0 to − 5 days) than the SOS estimates from NDVI composites that use the midpoint (− 2 to − 27 days). The SOS trends between 1985 and 2007 were not sensitive to the temporal resolution or compositing methods. However, SOS trends at individual ecozones showed significant differences with the SOS trends from daily NDVI data (Taiga plains and the Pacific maritime zones). Overall, our results suggest that satellite based estimates of vegetation green-up dates should preferably use sub-sampled NDVI composites that include the exact observation date of the maximum NDVI to minimize errors in both, SOS estimates and SOS trend analyses. For trend analyses alone, any of the compositing methods could be used, preferably with composite intervals of less than 28 days. This is an important finding, as it suggests that existing long-term 10-day or 15-day NDVI composites could be used for SOS trend analyses over broadleaf forests in Canada or similar areas. Future studies will take advantage of the growing in situ phenology networks to improve the validation of satellite derived green-up dates.     

A comparative study on the performance of dissortative mating and immigrants-based strategies for evolutionary dynamic optimization

Traditional Genetic Algorithms (GAs) mating schemes select individuals for crossover independently of their genotypic or phenotypic similarities. In Nature, this behavior is known as random mating. However, non-random protocols, in which individuals mate according to their kinship or likeness, are more common in natural species. Previous studies indicate that when applied to GAs, dissortative mating - a type of non-random mating in which individuals are chosen according to their similarities - may improve their performance (on both speed and reliability). Dissortative mating maintains genetic diversity at a higher level during the run, a fact that is frequently observed as a possible cause of dissortative GAs’ ability to escape local optima. Dynamic optimization demands a special attention when designing and tuning a GA, since diversity plays an even more crucial role than it does when tackling static ones. This paper investigates the behavior of the Adaptive Dissortative Mating GA (ADMGA) in dynamic problems and compares it to GAs based on random immigrants. ADMGA selects parents according to their Hamming distance, via a self-adjustable threshold value. The method, by keeping population diversity during the run, provides an effective means to deal with dynamic problems. Tests conducted with dynamic trap functions and dynamic versions of Road Royal and knapsack problems indicate that ADMGA is able to outperform other GAs on a wide range of tests, being particularly effective when the frequency of changes is low. Specifically, ADMGA outperforms two state-of-the-art algorithms on many dynamic scenarios. In addition, and unlike preceding dissortative mating GAs and other evolutionary techniques for dynamic optimization, ADMGA self-regulates the intensity of the mating restrictions and does not increase the set of parameters in GAs, thus being easier to tune.     

Discussion on paper “A Robust Real-Time Ellipse Detector” by Zhang and Liu

We correct a fundamental formula from paper “A Robust Real-Time Ellipse Detector” by Zhang and Liu published in journal “Pattern Recognition” in 2005.