Chemical composition and antioxidant properties of candlenut oil extracted by supercritical CO2

Candlenut oil was extracted using supercritical CO(2) (SC-CO(2)) with an optimization of parameters, by the response surface methodology. The ground candlenut samples were treated in 2 different ways, that is, dried in either a heat oven (sample moisture content of 2.91%) or dried in a vacuum oven (sample moisture content of 1.98%), before extraction. An untreated sample (moisture content of 4.87%) was used as a control. The maximum percentage of oil was extracted from the heat-oven-dried sample (77.27%), followed by the vacuum-oven-dried sample (74.32%), and the untreated sample (70.12%). At an SC-CO(2) pressure of 48.26 Mpa and 60 min of extraction time, the optimal temperatures for extraction were found to be 76.4 °C, 73.9 °C, and 70.6 °C for the untreated, heat-oven-dried, and vacuum-oven-dried samples, respectively. The heat-oven-dried sample contains the highest percentage of linoleic acid, followed by the untreated and vacuum-oven-dried samples. The antiradical activity of candlenut oil corresponded to an IC(50) value of 30.37 mg/mL.     

Synthesis of few-layered graphene by ion implantation of carbon in nickel thin films

The synthesis of few-layered graphene is performed by ion implantation of carbon species in thin nickel films, followed by high temperature annealing and quenching. Although ion implantation enables a precise control of the carbon content and of the uniformity of the in-plane carbon concentration in the Ni films before annealing, we observe thickness non-uniformities in the synthesized graphene layers after high temperature annealing. These non-uniformities are probably induced by the heterogeneous distribution/topography of the graphene nucleation sites on the Ni surface. Taken altogether, our results indicate that the number of graphene layers on top of Ni films is controlled by the nucleation process on the Ni surface rather than by the carbon content in the Ni film.     

Preparation of polymer-coated, scintillating ion-exchange resins for monitoring of 99Tc in groundwater

The present study was oriented to prepare new scintillating anion-exchange resins for measurement of (99)TcO(4)(-) in natural waters. The organic fluor 2-(1-naphthyl)-5-phenyloxazole was diffused into (chloromethyl)polystyrene resin. Thereafter, a thin layer of poly[[2-(methacryloyloxy)ethyl]trimethylammonium chloride] was grafted from the resin surface by surface-initiated atom transfer radical polymerization as an attempt to overcome potential problems related to the leaching of fluor molecules during usage. The residual chloromethyl groups of the polymer-coated resin were aminated by reaction with two different tertiary amines, triethylamine (TEA) and methyldioctylamine (MDOA). Off- and on-line quantification of (99)Tc was achieved with high detection efficiencies of 60.72 ± 1.93% and 72.83 ± 0.81% for resin with TEA and MDOA functional groups, respectively. The detection limit was determined to be less than the maximum contaminant level (33 Bq L(-1)) established under the Safe Drinking Water Act. The two functionalized resins were demonstrated to be selective for pertechnetate from synthetic groundwater containing up to 1000 ppm Cl(-), SO(4)(2-), and HCO(3)(-) and up to 1200 ppb Cr(2)O(7)(2-) in an acidic medium.     

Extraction chromatographic methods in the sample preparation sequence for thermal ionization mass spectrometric analysis of plutonium isotopes

A sample preparation sequence for actinide isotopic analysis by thermal ionization mass spectrometry (TIMS) is described that includes column-based extraction chromatography as the first separation step, followed by anion-exchange column separations. The sequence is designed to include a wet ashing step after the extraction chromatography to prevent any leached extractant or oxalic acid eluent reagents from interfering with subsequent separations, source preparation, or TIMS ionization. TEVA resin and DGA resin materials, containing extractants that consist only of C, N, O, and H atoms, were investigated for isolation of plutonium. Radiotracer level studies confirmed expected high yields from column-based separation procedures. Femtogram-level studies were carried out with TIMS detection, using multiple monoisotopic spikes applied sequentially throughout the separation sequence. Pu recoveries were 87% and 86% for TEVA and DGA resin separations, respectively. The Pu recoveries from 400 μL anion-exchange column separation sequences were 89% and 93% for trial sequences incorporating TEVA and DGA resin. Thus, a prior extraction chromatography step in the sequence did not interfere with the subsequent anion-exchange separation when a simple wet ash step was carried out in between these column separations. The average measurement efficiency for Pu, encompassing the chemical separation recoveries and the TIMS ionization efficiency, was 2.73% ± 0.77% (2σ) for the DGA resin trials and 2.67% ± 0.54% for the TEVA resin trials, compared to 3.41% and 2.37% (average 2.89%) for two control trials. These compare with an average measurement efficiency of 2.78% ± 1.70%, n = 33 from process benchmark analyses using Pu spikes processed through a sequence of oxalate precipitation, wet ash, iron hydroxide precipitation, and anion-exchange column separations. We conclude that extraction chromatography can be a viable separation procedure as part of a multistep sequence for TIMS sample preparation.     

Flame temperature and location measurements of sooting premixed Bunsen flames by rainbow schlieren deflectometry

Rainbow schlieren deflectometry (RSD) provides a simple and nonintrusive way of determining the temperature field of axisymmetric flames. This technique is specially suited for the detection of large temperature gradients, such as those near the flame location. We explore the feasibility and accuracy of using RSD to obtain the flame location and thermal structure of premixed Bunsen flames for varying fuel types, equivalence ratios, and soot loadings. Uncertainty analysis is also carried out to provide various ways to reduce RSD experimental error. The RSD technique is demonstrated to give useful data even for moderately and heavily sooting flames.     

Simultaneous adsorption of a mixture of paraquat and dye by NaY zeolite covered with alkylsilane

The surfaces of NaY zeolite particles were modified by the alkylsilylation of n-octadecyltrichlorosilane (OTS). Two kinds of modified NaY zeolites were prepared; one with its external surface partially and the other fully covered with alkylsilyl groups. Since the size of OTS is bigger than the pore diameter of NaY, it is attached on the external surface, leaving the internal pore accessible to adsorbate molecules. As a result of alkylsilylation, the adsorption properties of these sorbents were improved. The adsorption properties of these materials were tested by their reaction in a mixture of paraquat and blue dye. The results demonstrate that the alkysilylated NaY materials are capable of simultaneous adsorption of paraquat and blue dye. Paraquat was selectively adsorbed into the internal pore of the zeolite whereas the dye on the externally attached alkylsilyl groups of the sorbent; displaying the unique bimodal amphiphilic character of the alkylsilylated NaY zeolites.     

Activation of oxygen at metal surfaces

Oxygen chemisorption at metal surfaces has been shown through a combination of scanning tunnelling microscopy and photoelectron spectroscopy to involve transient states that provide low energy pathways for a wide range of surface reactions including the catalytic oxidation of ammonia and hydrocarbons. The kinetically 'hot' transients are disordered and mobile, become unreactive when they form ordered structures, and are characterized by non-classical kinetic behaviour.The role of surface additives (caesium) in controlling oxygen structures and the implications of oxygen transients for theory and reaction mechanisms in applied catalysis are considered.