Development of a miniaturised drug delivery system with wireless power transfer and communication

The development of an implantable system designed to deliver drug doses in a controlled manner over an extended time period is reported. Key performance parameters are the physical size, the power consumption and also the ability to perform wireless communications to enable the system to be externally controlled and interrogated. The system has been designed to facilitate wireless power transfer, which is very important for miniaturisation as it removes the need for a battery.     

Influence of age and proximity warning devices on collision avoidance in simulated driving

OBJECTIVE: We conducted a set of experiments to examine the utility of several different uni- and multimodal collision avoidance systems (CASs) on driving performance of young and older adult drivers in a high-fidelity simulator. BACKGROUND: Although previous research has examined the efficacy of different CASs on collision avoidance, there has been a dearth of studies that have examined such devices in different driving situations with different populations of drivers. METHOD: Several different CAS warnings were examined in varying traffic and collision configurations both without (Experiment 1a) and with (Experiment 2) a distracting in-vehicle task. RESULTS: Overall, collision avoidance performance for both potential forward and side object collisions was best for an auditory/visual CAS, which alerted drivers using both modalities. Interestingly, older drivers (60-82 years of age) benefited as much as younger drivers from the CAS, and sometimes they benefited more. CONCLUSION: These data suggest that CASs can be beneficial across a number of different driving scenarios, types of collisions, and driver populations. APPLICATION: These results have important implications for the design and implementation of CASs for different driver populations and driving conditions.     

Antigen selection from an HIV-1 immune antibody library displayed on yeast yields many novel antibodies compared to selection from the same library displayed on phage

Phage display of antibody libraries has been widely used for over a decade to generate monoclonal antibodies. Yeast display has been developed more recently. Here the two approaches were directly compared using the same HIV-1 immune scFv cDNA library expressed in phage and yeast display vectors and using the same selecting antigen (HIV-1 gp120). Yeast display was shown to sample the immune antibody repertoire considerably more fully than phage display, selecting all the scFv identified by phage display and twice as many novel antibodies. Positive phage display selection appeared to largely reflect those antibodies that as phage-scFv gave the highest signal in phage ELISAs assessing antigen binding. This signal is thought to reflect the efficiency of expression of folded scFv at the phage surface. Increased access to immune repertoires may increase the rescue of novel antibodies of therapeutic or analytical value that often form a minor part of a typical antibody response.     

137Cs in the fungal compartment of Swedish forest soils

The (137)Cs activities in soil profiles and in the mycelia of four ectomycorrhizal fungi were studied in a Swedish forest in an attempt to understand the mechanisms governing the transfer and retention of (137)Cs in forest soil. The biomass of four species of fungi was determined and estimated to be 16 g m(-2) in a peat soil and 47-189 g m(-2) in non-peat soil to the depth of 10 cm. The vertical distribution was rather homogeneous for two species (Tylospora spp. and Piloderma fallax) and very superficial for Hydnellum peckii. Most of the (137)Cs activity in mycelium of non-peat soils was found in the upper 5 cm. Transfer factors were quite high even for those species producing resupinate sporocarps. In the peat soil only approximately 0.3% of the total (137)Cs inventory in soil was found in the fungal mycelium. The corresponding values for non-peat soil were 1.3, 1.8 and 1.9%.     

Predicting the thermal inactivation of bacteria in a solid matrix: simulation studies on the relative effects of microbial thermal resistance parameters and process conditions

A combined mathematical model for predicting heat penetration and microbial inactivation in a solid body heated by conduction was tested experimentally by inoculating agar cylinders with Salmonella typhimurium or Enterococcus faecium and heating in a water bath. Regions of growth where bacteria had survived after heating were measured by image analysis and compared with model predictions. Visualisation of the regions of growth was improved by incorporating chromogenic metabolic indicators into the agar. Preliminary tests established that the model performed satisfactorily with both test organisms and with cylinders of different diameter. The model was then used in simulation studies in which the parameters D, z, inoculum size, cylinder diameter and heating temperature were systematically varied. These simulations showed that the biological variables D, z and inoculum size had a relatively small effect on the time needed to eliminate bacteria at the cylinder axis in comparison with the physical variables heating temperature and cylinder diameter, which had a much greater relative effect.     

Mechanical properties of amorphous nanosprings

Helical amorphous nanosprings have attracted particular interest due to their special mechanical properties. In this work we present a simple model, within the framework of the Kirchhoff rod model, for investigating the structural properties of nanosprings having asymmetric cross section. We have derived expressions that can be used to obtain the Young's modulus and Poisson's ratio of the nanospring material composite. We also address the importance of the presence of a catalyst in the growth process of amorphous nanosprings in terms of the stability of helical rods.     

Elemental analyses and determination of lead content in kohl (stone) by laser-induced breakdown spectroscopy

Elemental analyses of kohl (stone) samples collected from three different parts of the world were performed using laser-induced breakdown spectroscopy (LIBS). The analyses indicated that lead (Pb), copper (Cu), silver (Ag), iron (Fe), calcium (Ca), aluminum (Al), silicon (Si), and sodium (Na) were present in all the kohl samples. In addition to these elements, the sample from Madina, Kingdom of Saudi Arabia (KSA), contained the elements tin (Sn), zirconium (Zr), and antimony (Sb). The sample from Mount Toor, Egypt, also contained Sn. Also, quantitative analysis for lead was carried out by the standard addition method using the LIBS technique. The result showed the presence of 14.12 ± 0.28% by weight of Pb in the sample from Madina, which compares well with the measurement done using atomic absorption spectroscopy (AAS) (13.31 ± 0.46%). The standard addition method used three calibration curves drawn for three emission lines of the LIBS spectra of Pb. The limits of detection (LoD) for these calibration curves varied from 0.27% to 1.16% by weight. The lead contents of the samples from Mount Toor and the local market of Bangladesh were also measured by the AAS technique, and the results were 14.61 ± 0.48% and 8.98 ± 0.35% by weight, respectively. The reason for determining only the lead content in kohl, which may be used as an eye cosmetic, is the adverse effect that lead has on health.     

Properties of journal impact in relation to bibliometric research group performance indicators

In this paper we present a compilation of journal impact properties in relation to other bibliometric indicators as found in our earlier studies together with new results. We argue that journal impact, even calculated in a sufficiently advanced way, becomes important in evaluation practices based on bibliometric analysis only at an aggregate level. In the relation between average journal impact and actual citation impact of groups, the influence of research performance is substantial. Top-performance as well as lower performance groups publish in more or less the same range of journal impact values, but top-performance groups are, on average, more successful in the entire range of journal impact. We find that for the high field citation-density groups a larger size implies a lower average journal impact. For groups in the low field citation-density regions however a larger size implies a considerably higher average journal impact. Finally, we found that top-performance groups have relatively less self-citations than the lower performance groups and this fraction is decreasing with journal impact.