High accumulation of perfluorooctane sulfonate (PFOS) in marine tucuxi dolphins (Sotalia guianensis) from the Brazilian coast

Perfluorooctane sulfonate (PFOS) and other perfluoroalkyl compounds (PFCs) were measured in liver samples from 29 marine tucuxi dolphins from Rio de Janeiro state (RJ), Brazil. PFC measurement combined liquid chromatography and mass spectrometry, using a CapLC system connected to a Quadrupole-LIT mass spectrometer. PFOS was the only PFC detected and it was so in all samples. PFOS concentrations (ng x g(-1) dw) of dolphins (n=23) from the highly contaminated Guanabara Bay (in RJ) varied between 43 and 2431 as well as between 76 and 427 from areas of RJ other than the quoted bay (n=6). Concentrations of three fetuses and one neonate varied between 664 and 1590. Fetus/mother ratios were calculated in two situations (2.75 and 2.62). It seems that mother-to-calf transference plays important role for relationships between PFOS and age. When a one-year-old male calf presenting 2431 ng x g(-1) dw was excluded from the test, significant correlations were observed between PFOS concentrations and both age and total length. Despite the placental transference, PFOS concentrations were not significantly lower in females than in males. PFOS levels in marine tucuxi dolphins from Guanabara Bay are among the highest detected to date in cetaceans, and this may represent a threat to the small population concerned.     

A practical guide to the measurement of structure phases and magnitudes by three-beam convergent beam electron diffraction

The practical details for the direct measurement of structural phases and magnitudes from centrosymmetric crystals using three-beam convergent beam electron diffraction patterns are given. These details are presented as a step-by-step guide for easy implementation. Each step is illustrated with worked examples from alpha-Al(2)O(3). Twenty-nine measurements of 6 independent three-phase invariants and 87 measurements of 10 independent structure magnitudes have been made.     

Optical properties of tropospheric aerosols determined by lidar and spectrophotometric measurements (Photochemical Activity and Solar Ultraviolet Radiation campaign)

We present the results of the aerosol measurements carried out over the Aegean Sea during the Photochemical Activity and Solar Ultraviolet Radiation campaign held in Greece during June 1996. Simultaneous observations performed with a lidar and a double-monochromator spectrophotometer allowed us to retrieve the optical depth, the Angstr?m coefficient, and the backscatter-to-extinction ratio. The Sun photometric data can be used to improve quantitative aerosol measurements by lidar in the Planetary Boundary Layer. Systematic errors could arise otherwise, because the value of the backscatter-to-extinction ratio has to be supplied. Instead this ratio can be retrieved experimentally by use of an iterative solution of the lidar equation.     

Bioactive peptides derived from milk proteins

Milk proteins are known for having a wide range of nutritional, functional and biological properties that make them important ingredients in functional or health promoting foods. These properties are partly attributed to bioactive peptides coded in the different milk proteins. Bioactive peptides are inactive within the protein sequence but may be released by the action of native proteolitic enzymes from milk, enzymes from lactic acid bacteria or from exogenous sources or may be produced during gastrointestinal digestion or processing of foods. Peptides derived from caseins and whey proteins were shown to present several bioactive properties such as opioid, antihypertensive, antimicrobial, immunodulatory, mineral carrier and antithrombotic. This overview presents a perspective of the importance of dairy proteins in the production of bioactive peptides and their biological activities, as well as the main analytical tecniques that have been used for the isolation and identification of these peptides.     

Macroscopic and microscopic analysis of the tongue of the common opossum (Didelphis marsupialis)

We performed a macroscopic and microscopic study of the tongues of common opossums, Didelphis marsupialis, from South America. We studied two males and two females. We collected morphometric data on the tongue with precision calipers. For the light microscopy and scanning electron microscopy analyses, we fixed tissue fragments in 10% formaldehyde and 2.5% glutaraldehyde, respectively. The opossum tongues averaged 5.87 ± 0.20 cm in length, 3.27 ± 0.15 cm in width at the lingual body, and 3.82 ± 0.15 cm in width at the root. The mean thickness of the lingual body was 1.8 ± 0.1 cm, and the thickness of the root was 3.82 ± 0.15 cm. Sharp filiform papillae were scattered across the entire tongue; conical filiform papillae occurred on the lingual body and tongue tip; fungiform papillae were scattered among the filiform papillae on the lingual body and tongue tip; and there were three vallate papillae at the root of the tongue. We found two strands of papillary projections in the tongue root. Despite the low variability observed in the lingual papillae, the morphological data obtained in this study may be related to the opossum's diverse food habits and the extensive geographic distribution of the species throughout America. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Intestinal drug absorption enhancers: synergistic effects of combinations

Although many absorption enhancers have been investigated, very few are used clinically. A need exists therefore for more effective absorption enhancers. The drug-absorption-enhancing effects of combinations of N-trimethyl chitosan chloride (TMC) with degrees of quaternization of 48 and 64%, dicarboxymethyl chitosan oligosaccharide, and chitosan lactate oligomer with monocaprin and melittin were compared to their individual performances using the in vitro Caco-2 cell model. Combining the absorption enhancers showed synergism in both the reduction of the transepithelial electrical resistance (TEER) and the enhancement of the transport of a macromolecular model compound across this intestinal epithelial cell layer. Lower concentrations of the absorption enhancers in the combination groups exhibited greater effects on the epithelial cells compared with the individual absorption enhancers.     

In vitro behavior of osteoblast-like cells on PLLA films with a biomimetic apatite or apatite/collagen composite coating

To investigate the methods to improve the cell–material interaction of devices or tissue engineering scaffolds made of poly(l-lactic acid) (PLLA) polymer, apatite and apatite/collagen composite coatings were formed on PLLA films within 24 h through accelerated biomimetic processes. In vitro investigation using Saos-2 osteoblast-like cells through cell culture was conducted to assess the biological performance of these biomimetic coatings. The cell morphology on three types of surfaces, viz., PLLA film, PLLA film with the apatite coating, and PLLA film with the apatite/collagen composite coating, was studied using scanning electron microscopy (SEM). Cell viability was estimated using the MTT assay. The differentiated cell function was assessed by measuring the alkaline phosphatase (ALP) activity. The results obtained indicated that the biomimetic apatite and apatite/collagen composite coatings could significantly enhance the proliferation and differentiation of osteoblast-like cells. The apatite/collagen composite coating appears to be promising for the surface modification of PLLA-based devices with much improved interactions with osteoblastic cells.     

Formation of chiral branched nanowires by the Eshelby Twist

Manipulating the morphology of inorganic nanostructures, such as their chirality and branching structure, has been actively pursued as a means of controlling their electrical, optical and mechanical properties. Notable examples of chiral inorganic nanostructures include carbon nanotubes, gold multishell nanowires, mesoporous nanowires and helical nanowires. Branched nanostructures have also been studied and been shown to have interesting properties for energy harvesting and nanoelectronics. Combining both chiral and branching motifs into nanostructures might provide new materials properties. Here we show a chiral branched PbSe nanowire structure, which is formed by a vapour-liquid-solid branching from a central nanowire with an axial screw dislocation. The chirality is caused by the elastic strain of the axial screw dislocation, which produces a corresponding Eshelby Twist in the nanowires. In addition to opening up new opportunities for tailoring the properties of nanomaterials, these chiral branched nanowires also provide a direct visualization of the Eshelby Twist.     

Real-time phase-front detector for heterodyne interferometers

We present a real-time differential phase-front detector sensitive to better than 3 mrad rms, which corresponds to a precision of approximately 500 pm. This detector performs a spatially resolving measurement of the phase front of a heterodyne interferometer, with heterodyne frequencies up to approximately 10 kHz. This instrument was developed as part of the research for the Laser Interferometer Space Antenna Technology Package interferometer and will assist in the manufacture of its flight model. Because of the advantages this instrument offers, it also has general applications in optical metrology.