Bioequivalence of two brands of ciprofloxacin 750 mg tablets (Sarf and Ciprobay) in healthy human volunteers

An open, randomized, two-way crossover study was carried out in 28 healthy volunteers at Gulf Pharmaceutical Industries (Julphar), as a joint venture with Saqr Hospital, Ras Al-Khaimah, UAE. The two commercial brands used were Sarf (Julphar, UAE) as test and Ciprobay (Bayer AG, Germany) as reference product. The drug was administered to each subject with 240 mL of water after an overnight fasting in two treatment days separated by a one-week washout period. After dosing, serial blood samples were collected for a period of 24 hr and serum was separated and analyzed for ciprofloxacin using a sensitive, reproducible, and accurate high-performance liquid chromatography (HPLC) method with ultraviolet (UV) detection. Various pharmacokinetic parameters, including AUC0-t, AUC0-infinity, Cmax, Tmax, t1/2, and lambdaz, were determined from ciprofloxacin serum concentration-time profiles for both formulations and found to be in good agreement with reported values. The parameters AUC0-t, AUC0-infinity, and Cmax were tested for bioequivalence after log-transformation of data. No significant difference was found based on analysis of variance (ANOVA); the 90% confidence intervals (95.73-107.62%, 94.98-108.26%, 92.80-103.90% for AUC0-t, AUC0-infinity, Cmax, respectively) for the test/reference ratios of these parameters were within the bioequivalence acceptance range of 80-125%. Based on this data, it is concluded that both formulations are bioequivalent and are interchangeable in medical practice.     

Synthesis of few-layered graphene by ion implantation of carbon in nickel thin films

The synthesis of few-layered graphene is performed by ion implantation of carbon species in thin nickel films, followed by high temperature annealing and quenching. Although ion implantation enables a precise control of the carbon content and of the uniformity of the in-plane carbon concentration in the Ni films before annealing, we observe thickness non-uniformities in the synthesized graphene layers after high temperature annealing. These non-uniformities are probably induced by the heterogeneous distribution/topography of the graphene nucleation sites on the Ni surface. Taken altogether, our results indicate that the number of graphene layers on top of Ni films is controlled by the nucleation process on the Ni surface rather than by the carbon content in the Ni film.     

Extraction chromatographic methods in the sample preparation sequence for thermal ionization mass spectrometric analysis of plutonium isotopes

A sample preparation sequence for actinide isotopic analysis by thermal ionization mass spectrometry (TIMS) is described that includes column-based extraction chromatography as the first separation step, followed by anion-exchange column separations. The sequence is designed to include a wet ashing step after the extraction chromatography to prevent any leached extractant or oxalic acid eluent reagents from interfering with subsequent separations, source preparation, or TIMS ionization. TEVA resin and DGA resin materials, containing extractants that consist only of C, N, O, and H atoms, were investigated for isolation of plutonium. Radiotracer level studies confirmed expected high yields from column-based separation procedures. Femtogram-level studies were carried out with TIMS detection, using multiple monoisotopic spikes applied sequentially throughout the separation sequence. Pu recoveries were 87% and 86% for TEVA and DGA resin separations, respectively. The Pu recoveries from 400 μL anion-exchange column separation sequences were 89% and 93% for trial sequences incorporating TEVA and DGA resin. Thus, a prior extraction chromatography step in the sequence did not interfere with the subsequent anion-exchange separation when a simple wet ash step was carried out in between these column separations. The average measurement efficiency for Pu, encompassing the chemical separation recoveries and the TIMS ionization efficiency, was 2.73% ± 0.77% (2σ) for the DGA resin trials and 2.67% ± 0.54% for the TEVA resin trials, compared to 3.41% and 2.37% (average 2.89%) for two control trials. These compare with an average measurement efficiency of 2.78% ± 1.70%, n = 33 from process benchmark analyses using Pu spikes processed through a sequence of oxalate precipitation, wet ash, iron hydroxide precipitation, and anion-exchange column separations. We conclude that extraction chromatography can be a viable separation procedure as part of a multistep sequence for TIMS sample preparation.     

Activation of oxygen at metal surfaces

Oxygen chemisorption at metal surfaces has been shown through a combination of scanning tunnelling microscopy and photoelectron spectroscopy to involve transient states that provide low energy pathways for a wide range of surface reactions including the catalytic oxidation of ammonia and hydrocarbons. The kinetically 'hot' transients are disordered and mobile, become unreactive when they form ordered structures, and are characterized by non-classical kinetic behaviour.The role of surface additives (caesium) in controlling oxygen structures and the implications of oxygen transients for theory and reaction mechanisms in applied catalysis are considered.     

Flame temperature and location measurements of sooting premixed Bunsen flames by rainbow schlieren deflectometry

Rainbow schlieren deflectometry (RSD) provides a simple and nonintrusive way of determining the temperature field of axisymmetric flames. This technique is specially suited for the detection of large temperature gradients, such as those near the flame location. We explore the feasibility and accuracy of using RSD to obtain the flame location and thermal structure of premixed Bunsen flames for varying fuel types, equivalence ratios, and soot loadings. Uncertainty analysis is also carried out to provide various ways to reduce RSD experimental error. The RSD technique is demonstrated to give useful data even for moderately and heavily sooting flames.     

Simultaneous adsorption of a mixture of paraquat and dye by NaY zeolite covered with alkylsilane

The surfaces of NaY zeolite particles were modified by the alkylsilylation of n-octadecyltrichlorosilane (OTS). Two kinds of modified NaY zeolites were prepared; one with its external surface partially and the other fully covered with alkylsilyl groups. Since the size of OTS is bigger than the pore diameter of NaY, it is attached on the external surface, leaving the internal pore accessible to adsorbate molecules. As a result of alkylsilylation, the adsorption properties of these sorbents were improved. The adsorption properties of these materials were tested by their reaction in a mixture of paraquat and blue dye. The results demonstrate that the alkysilylated NaY materials are capable of simultaneous adsorption of paraquat and blue dye. Paraquat was selectively adsorbed into the internal pore of the zeolite whereas the dye on the externally attached alkylsilyl groups of the sorbent; displaying the unique bimodal amphiphilic character of the alkylsilylated NaY zeolites.     

A liquid chromatography-mass spectrometry method for the quantification of bioavailability and bioconversion of beta-carotene to retinol in humans

A method based on high-performance liquid chromatography-atmospheric pressure chemical ionization mass spectrometry (APCI LC-MS) was developed for the quantification of the bioavailability of retinyl palmitate and beta-carotene and the bioconversion of beta-carotene to retinol in humans. Following oral administration of [8,9,10,11,12,13,14,15,19,20-13C10]-retinyl palmitate and [12,13,14,15,20,12',13',14',15',20'-13C10]-beta-carotene at physiological doses to children between 8 and 11 years of age, blood samples were drawn and serum was prepared. Retinol and beta-carotene were extracted from 0.2- and 1.0-mL serum samples, respectively, and analyzed using reversed-phase HPLC with a C30 column interfaced to an APCI mass spectrometer. Unlike other LC-MS assays for carotenoids, no additional purification steps were necessary, nor was any derivatization of retinol or beta-carotene required. APCI LC-MS showed a linear detector response for beta-carotene over 4 orders of magnitude. Using selected ion monitoring to record the elution profile of protonated circulating beta-carotene at m/z 537 and [13C10]-beta-carotene at m/z 547, the limit of detection was determined to be 0.5 pmol injected on-column. To assess the ratio of labeled to unlabeled retinol, selected ion monitoring was carried out at m/z 269, 274, and 279. These abundant fragment ions corresponded to the loss of water from the protonated molecule of circulating retinol, [13C5]-retinol (metabolically formed from orally administered [13C10]-beta-carotene), and [13C10]-retinol (formed by hydrolysis of [13C10]-retinyl palmitate). The ratios of labeled to unlabeled retinol and the ratio of labeled to unlabeled beta-carotene were calculated. Combined with standard HPLC measurement of beta-carotene and retinol concentration and a mathematical model, these results showed that this simple LC-MS method can be used to quantify beta-carotene bioavailability and its bioconversion to retinol at physiologically relevant doses.     

Decorrelation characteristics of transverse blood flow along an intravascular array catheter

In recent years, a new method to measure transverse blood flow based on the decorrelation of radio frequency (RF) signals has been introduced. In this paper, we investigated the decorrelation characteristics of transverse blood flow measurement using an intravascular ultrasound (IVUS) array catheter by means of computer modeling. Blood was simulated as a collection of randomly located point scatterers. Moving this scattering medium transversally across the acoustical beam represented flow. First-order statistics were evaluated, and the signal-to-noise ratio from the signals was measured. The correlation coefficient method was used to present the results. The decorrelation patterns for RF and for RF-envelope signals were studied. The decorrelation patterns from the RF signals were in good agreement with those obtained from theoretical beam profiles. This agreement suggests that the decorrelation properties of an IVUS array catheter for measuring quantitative transverse blood flow can be assessed by measuring the ultrasound beam. A line of point scatterers, moved transversally across the acoustical beam (line spread function), can determine this decorrelation behaviour.     

Optical properties of tropospheric aerosols determined by lidar and spectrophotometric measurements (Photochemical Activity and Solar Ultraviolet Radiation campaign)

We present the results of the aerosol measurements carried out over the Aegean Sea during the Photochemical Activity and Solar Ultraviolet Radiation campaign held in Greece during June 1996. Simultaneous observations performed with a lidar and a double-monochromator spectrophotometer allowed us to retrieve the optical depth, the Angstr?m coefficient, and the backscatter-to-extinction ratio. The Sun photometric data can be used to improve quantitative aerosol measurements by lidar in the Planetary Boundary Layer. Systematic errors could arise otherwise, because the value of the backscatter-to-extinction ratio has to be supplied. Instead this ratio can be retrieved experimentally by use of an iterative solution of the lidar equation.     

Formation of chiral branched nanowires by the Eshelby Twist

Manipulating the morphology of inorganic nanostructures, such as their chirality and branching structure, has been actively pursued as a means of controlling their electrical, optical and mechanical properties. Notable examples of chiral inorganic nanostructures include carbon nanotubes, gold multishell nanowires, mesoporous nanowires and helical nanowires. Branched nanostructures have also been studied and been shown to have interesting properties for energy harvesting and nanoelectronics. Combining both chiral and branching motifs into nanostructures might provide new materials properties. Here we show a chiral branched PbSe nanowire structure, which is formed by a vapour-liquid-solid branching from a central nanowire with an axial screw dislocation. The chirality is caused by the elastic strain of the axial screw dislocation, which produces a corresponding Eshelby Twist in the nanowires. In addition to opening up new opportunities for tailoring the properties of nanomaterials, these chiral branched nanowires also provide a direct visualization of the Eshelby Twist.