Sensitivity enhancement of a flexible MEMS strain sensor by a field effect transistor in an all organic approach

We report a low-cost piezoresistive nanocomposite based organic micro electro mechanical system (MEMS) strain sensor that has been combined to an organic field effect transistor (OFET) with the objective of amplifying the sensitivity of the sensor. When the MEMS cantilever is strained by a mechanical deflection, the resulting variation of resistivity influences the gate voltage (V_GS) of the OFET and, hence, changes the drain current (I_DS) of the transistor. The present combination allows an enhancement of sensitivity to strain by a factor 3.7, compared to the direct detection of resistance changes of the nanocomposite. As a consequence, a low limit of detection of 24 ppm has been estimated in terms of strain transduction efficiency. Furthermore, the organic microsystem exhibits a short response time and operates reversibly with an excellent robustness.     

A Noisy Channel Tolerant Image Encryption Scheme

In this paper, we present an image encryption scheme that has the capability to tolerate noisy effects of a wireless channel. This means if the encrypted image data is corrupted by channel noise up to a certain level, correct decryption is possible with some distortion. The proposed image encryption scheme relies on some very interesting properties of orthogonal matrices containing columns that form a set of orthonormal basis vectors. Besides being tolerant to noisy channels, the proposed scheme also provides good security against well-known cryptographic attacks as demonstrated in this paper by a number of experimental results and security analysis.     

Dielectric loaded HTS resonators as frequency standards andlow-phase noise oscillators

High-quality, high-temperature superconducting (HTS) thin-films exhibit very low losses at microwave frequencies and, as a result, allow very high Q resonators to be produced. The size of such resonators may be significantly reduced by loading with low-loss single crystal dielectric. The potential for HTS dielectric loaded resonators as practical frequency standards and reference elements for low-phase-noise oscillators is assessed, with emphasis on operation at 60 K, a temperature readily attainable with compact Stirling cycle coolers     

Monoclonal Cell Line Generation and CRISPR/Cas9 Manipulation via Single‐Cell Electroporation

Stably transfected cell lines are widely used in drug discovery and biological research to produce recombinant proteins. Generation of these cell lines requires the isolation of multiple clones, using time‐consuming dilution methods, to evaluate the expression levels of the gene of interest. A new and efficient method is described for the generation of monoclonal cell lines, without the need for dilution cloning. In this new method, arrays of patterned cell colonies and single cell transfection are employed to deliver a plasmid coding for a reporter gene and conferring resistance to an antibiotic. Using a nanofountain probe electroporation system, probe positioning is achieved through a micromanipulator with sub‐micron resolution and resistance‐based feedback control. The array of patterned cell colonies allows for rapid selection of numerous stably transfected clonal cell lines located on the same culture well, conferring a significant advantage over slower and labor‐intensive traditional methods. In addition to plasmid integration, this methodology can be seamlessly combined with CRISPR/Cas9 gene editing, paving the way for advanced cell engineering.     

Bimetal cup hydroforming of Al/St and Cu/St composites: Adaptive finite element analysis and experimental study

Journal of Mechanical Science and Technology - An adaptive Finite element analysis (FEA) was proposed in this paper for the industrial design of bimetal conical-cylindrical cup hydroforming....     

New syntheses of pyrazolo[3,4-d]pyrimidine,pyrazolo[3,4-d]pyridazine,isoindolinedione and pyrazole derivatives

Phenacylmalononitriles 2 react with hydrazines, acetic-hydrochloric acid and with diazotised primary aromatic amines to afford phenacylpyrazole ( 5a,b ), aminofurans ( 6a,b ) and aminopyrazole derivatives ( 3a,d ) respectively. The synthesised derivatives ( 3d, 6a ) were the key materials for the synthesis of isoindolinedione, ( 7a – c ) pyrazolopyrimidine ( 9, 10 ), and pyrazolopyridazine derivatives ( 11 ). The structures of the newly synthesised heterocycles were established on the basis of elemental analyses and spectral data besides synthesis via other routes.     

Biofilm and Small Colony Variants—An Update on Staphylococcus aureus Strategies toward Drug Resistance

Recently, the drawbacks arising from the overuse of antibiotics have drawn growing public attention. Among them, drug-resistance (DR) and even multidrug-resistance (MDR) pose significant challenges in clinical practice. As a representative of a DR or MDR pathogen, Staphylococcus aureus can cause diversity of infections related to different organs, and can survive or adapt to the diverse hostile environments by switching into other phenotypes, including biofilm and small colony variants (SCVs), with altered physiologic or metabolic characteristics. In this review, we briefly describe the development of the DR/MDR as well as the classical mechanisms (accumulation of the resistant genes). Moreover, we use multidimensional scaling analysis to evaluate the MDR relevant hotspots in the recent published reports. Furthermore, we mainly focus on the possible non-classical resistance mechanisms triggered by the two important alternative phenotypes of the S. aureus, biofilm and SCVs, which are fundamentally caused by the different global regulation of the S. aureus population, such as the main quorum-sensing (QS) and agr system and its coordinated regulated factors, such as the SarA family proteins and the alternative sigma factor σB (SigB). Both the biofilm and the SCVs are able to escape from the host immune response, and resist the therapeutic effects of antibiotics through the physical or the biological barriers, and become less sensitive to some antibiotics by the dormant state with the limited metabolisms.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Tepary Bean Starch Part III: In vitro Digestibility

In vitro digestibility of starch from tepary bean, Phaseolus acutifolius var. latifolius, was determined in comparison with tepary bean flour and maize starch. The extent of sample hydrolysis by α-amylase was measured as mg reducing sugar (maltose) released per 100 mg substrate. After 2 h incubation at 37°C, values obtained for tepary starch, tepary flour and maize starch treated in various ways were as follows: raw 8.0, 8.6 and 25.6; freeze dried 2.6, 3.2 and 17.8; autoclaved 7.4, 5.7 and 27.7; cooked (15 min) 81.7, 23.1 and 87.8; resp. Raw tepary starch was more resistant to hydrolysis than maize starch due, perhaps, to differences in granule structure and amylose content. Freeze-drying and autoclaving slightly decreased digestibility of both tepary starch and flour. Cooking greatly increased susceptibility to hydrolysis for each substrate. The rate of increase was reduced after 15 min exposure to enzymes, and no appreciable difference was found between cooked tepary and maize starches.     

The effect of microencapsulation with nitrocellulose on thermal properties of sodium azide particles

Based on the coacervation principle a solvent/non-solvent method has been used for microencapsulation of sodium azide (NaN₃) with fibrous nitrocellulose (NC). Scanning electron microscopy (SEM) was employed to examine the coating morphology. The thermal behavior of solid samples has been studied by means of thermogravimetry (TG) and differential scanning calorimetry (DSC). The results of TG–DTA analysis revealed that the main thermal degradation for the pure NC and NaN₃ occurs in the temperature ranges of 192–220 and 415–420 °C, respectively. The effects of some parameters, such as NC to NaN₃ weight ratio and volume and addition time of non-solvent, on coating quality and thermal properties have been investigated by SEM and thermal methods. The results of these experiments showed that the decomposition temperature of most stabilized coated sodium azide is about 50 °C higher than that of the pure sample. The DSC experiments were conducted to study the influence of the heating rate (5, 10, 15 and 20 °C/min) on the thermal decomposition processes of the pure NC, coated and pure NaN₃ samples. The results revealed that, as the heating rate was increased, decomposition temperature of the compounds was increased. Also, the kinetic parameters such as activation energy and frequency factor of the decomposition processes were obtained from the DSC data by non-isothermal methods proposed by ASTM E696 and Ozawa. Our finding showed that coated NaN₃ has lower decomposition rate with respect to the pure one.