Fabrication and characterization of silk/forsterite composites for tissue engineering applications

In this research, novel composite scaffolds consisting of silk fibroin and forsterite powder were prepared by a freeze-drying method. In addition, the effects of forsterite powder contents on the structure of the scaffolds were investigated to provide an appropriate composite for bone tissue engineering applications. The morphology studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques showed that the forsterite ceramic was well distributed throughout the structures of SF/forsterite scaffolds. Furthermore, the forsterite powder (up to 40 wt%) was homogenously distributed within the silk fibroin as a matrix.     

Evaluation of Microstructure and Mechanical Properties in Dissimilar Austenitic/Super Duplex Stainless Steel Joint

To study the effect of chemical composition on microstructural features and mechanical properties of dissimilar joints between super duplex and austenitic stainless steels, welding was attempted by gas tungsten arc welding process with a super duplex (ER2594) and an austenitic (ER309LMo) stainless steel filler metal. While the austenitic weld metal had vermicular delta ferrite within austenitic matrix, super duplex stainless steel was mainly comprised of allotriomorphic grain boundary and Widmanstätten side plate austenite morphologies in the ferrite matrix. Also the heat-affected zone of austenitic base metal comprised of large austenite grains with little amounts of ferrite, whereas a coarse-grained ferritic region was observed in the heat-affected zone of super duplex base metal. Although both welded joints showed acceptable mechanical properties, the hardness and impact strength of the weld metal produced using super duplex filler metal were found to be better than that obtained by austenitic filler metal.     

Time–cost optimization: using GA and fuzzy sets theory for uncertainties in cost

Uncertainties should be considered in any time–cost trade‐off problems when minimizing project cost and duration, which leads to the so‐called stochastic time–cost trade‐off problem. A new approach to investigate stochastic time–cost trade‐off problems employing fuzzy logic theory is presented. The proposed approach fully embeds the fuzzy structure of the uncertainties in total direct cost into the model. An appropriate GA is used to develop a solution to the multi‐objective fuzzy time cost model. The accepted risk level of the project manager is defined through α cut approach for which a separate Pareto front with set of non‐dominated solutions has been developed. To compare the alternative set of options for any assumed project duration, associated fuzzy costs for different values of α cut are ranked employing two appropriate approaches for fuzzy costs comparison. The proposed models are applied to solve two benchmark test problems. It is shown that the models facilitate the decision‐making process by selecting specified risk levels and employing the associated Pareto front.     

Electrospun biodegradable nanofibers scaffolds for bone tissue engineering

Many polymeric materials have been developed and introduced for bone regeneration. Especially, their nanofibrous forms are mostly applied for artificial extracellular matrices. Polymeric materials in their nanofibrous form show some potent properties such as high surface‐to‐volume ratio, tunable porosity, and ease of surface functionalization. Benefiting from the properties of their main polymer and additives, they can provide new opportunities for cell seeding, proliferation, and new 3D‐tissue formation. This article focuses on most cited polymeric nanofibrous scaffolds fabricated by electrospinning and recent achievements. They were divided into two main categories: natural (collagen, silk, keratin, gelatin, chitosan, and alginate) and synthetic (e.g., polycaprolactone, polylactic acid, and polyglycolic acid) polymers. The role of several additives like hydroxyapatite, bone morphogenetic proteins (BMPs), tricalcium phosphate, and collagen type I in improving the adhesion, differentiation, and tissue formation of stem cells were discussed. Finally, the osteogenic capacity and ability of nanofibrous scaffolds to support the growth of clinically relevant bone tissue were briefly studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42883.     

Co-Production of Fungal Biomass Derived Constituents and Ethanol from Citrus Wastes Free Sugars without Auxiliary Nutrients in Airlift Bioreactor

The potential of two zygomycetes fungi, Mucor indicus and Rhizopus oryzae, in assimilating citrus waste free sugars (CWFS) and producing fungal chitosan, oil, and protein as well as ethanol was investigated. Extraction of free sugars from citrus waste can reduce its environmental impact by decreasing the possibility of wild microorganisms growth and formation of bad odors, a typical problem facing the citrus industries. A total sugar concentration of 25.1 g/L was obtained by water extraction of citrus waste at room temperature, used for fungal cultivation in shake flasks and airlift bioreactor with no additional nutrients. In shake flasks cultivations, the fungi were only able to assimilate glucose, while fructose remained almost intact. In contrast, the cultivation of M. indicus and R. oryzae in the four-liter airlift bioreactor resulted in the consumption of almost all sugars and production of 250 and 280 g fungal biomass per kg of consumed sugar, respectively. These biomasses correspondingly contained 40% and 51% protein and 9.8% and 4.4% oil. Furthermore, the fungal cell walls, obtained after removing the alkali soluble fraction of the fungi, contained 0.61 and 0.69 g chitin and chitosan per g of cell wall for M. indicus and R. oryzae, respectively. Moreover, the maximum ethanol yield of 36% and 18% was obtained from M. indicus and R. oryzae, respectively. Furthermore, that M. indicus grew as clump mycelia in the airlift bioreactor, while R. oryzae formed spherical suspended pellets, is a promising feature towards industrialization of the process.     

Study of inhibition effect of carboxylic salt derivative on corrosion of C1010 carbon steel in saline solution

In the present work, sodium 4-[(4-formylbenzylidene) amino] benzoiate (4) was synthesized and its structure was confirmed using spectroscopic techniques. Prepared compound was successfully applied as a corrosion inhibitor for C1010 carbon steel in 3.5% NaCl solution at 25°C. Different electrochemical measurements such as linear polarization resistance (LPR), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) were used to evaluate the suggested inhibitor (4). The results of different electrochemical measurements show that inhibition efficiencies obtained from EIS curves are in consistence with the results of potentiodynamic polarization and LPR measurements due to increase corrosion inhibition efficiency by increasing the concentration of organic inhibitor (4). Semi-empirical calculations with PM3 method were used to find relationship between molecular structure and inhibiting effect of suggested inhibitor (4).     

Bimetal cup hydroforming of Al/St and Cu/St composites: Adaptive finite element analysis and experimental study

Journal of Mechanical Science and Technology - An adaptive Finite element analysis (FEA) was proposed in this paper for the industrial design of bimetal conical-cylindrical cup hydroforming....     

Photocatalytic degradation of Basic Blue 41 dye under visible light over SrTiO3/Ag3PO4 hetero-nanostructures

In an attempt to develop nanostructured photocatalysts with high performance, SrTiO₃/Ag₃PO₄ hetero-nanostructures were successfully fabricated. The formed binary heterojunctions were composed of SrTiO₃ nanotubes prepared using liquid-phase deposition, and Ag₃PO₄ nanoparticles prepared using a sol–gel method. Synthesis details, including morphology, structure, and optical properties of the prepared photocatalysts, were characterized and comparatively discussed. The results showed that at an optimal ratio of SrTiO₃ to Ag₃PO₄ (20–80), the photocatalytic degradation of Basic Blue 41 under 80-min visible light irradiation is the maximum amount of 99%, which is about 4.4 and 1.5 times higher than that of pristine SrTiO₃ nanorods and Ag₃PO₄ nanoparticles, respectively. It can be due to the synergistic effect of two materials that provide high light absorption and charge carriers’ separation. Finally, a detailed possible mechanism for enhancing the photocatalytic activity of the SrTiO₃/Ag₃PO₄ hetero-nanostructures was proposed.     

Interfacial activity and micellar morphology of an imidazolium ring containing zwitterionic surfactants

Zwitterionic surfactants based on 3-(1-alkyl-3-imidazolio) propane-sulfonate ([ImS3-R] where R is octyl or dodecyl) is an emerging and important class of amphiphile due to their relevance as nano reactors for the synthesis of metallic nanoparticles and accelerated acid hydrolysis. The physicochemical properties of such synthesized imidazolium ring-containing zwitterionic surfactants have been characterized by surface tension and small-angle neutron scattering (SANS) techniques. Surface tension measurements were used to calculate several thermodynamic parameters over a range of concentrations and temperatures (298–313 K). The results obtained showed a weak signature representing the critical micelle concentration (CMC) for ImS3-8, however, by increasing the alkyl length of the hydrophobic group to dodecyl, that is, ImS3-8 to ImS3-12, the signature of the CMC was much more evident. As expected, the CMC for ImS3-12 shifted to a lower concentration. An increase in temperature increased the surface activity and decreased the CMC of both zwitterionic surfactants, although the changes were small. Compared to classical surfactants, that is, sodium dodecyl sulfate and dodecyl trimethylammonium bromide, the CMC of ImS3-12 is much lower. Modeling of SANS data demonstrated that the morphology of the micelles formed by these amphiphiles may be described by the “classical” model, a central hydrophobic core, with a shell of hydrated headgroups. Due to their widespread applications in colloidal and interfacial science, the present study adds new insight to the fundamental understanding of these interesting imidazolium-based surface-active ionic liquids (ImS3-R).