An extended hesitant fuzzy set using SWARA-MULTIMOORA approach to adapt online education for the control of the pandemic spread of COVID-19 in higher education institutions

The world has been challenged since late 2019 by COVID-19. Higher education institutions have faced various challenges in adapting online education to control the pandemic spread of COVID-19. The present study aims to conduct a survey study through the interview and scrutinizing the literature to find the key challenges. Subsequently, an integrated MCDM framework, including Stepwise Weight Assessment Ratio Analysis (SWARA) and Multiple Objective Optimization based on Ratio Analysis plus Full Multiplicative Form (MULTIMOORA), is developed. The SWARA procedure is applied to the analysis and assesses the challenges to adapt the online education during the COVID-19 outbreak, and the MULTIMOORA approach is utilized to rank the higher education institutions on hesitant fuzzy sets. Further, an illustrative case study is considered to express the proposed idea's feasibility and efficacy in real-world decision-making. Finally, the obtained result is compared with other existing approaches, confirming the proposed framework's strength and steadiness. The identified challenges were systemic, pedagogical, and psychological challenges, while the analysis results found that the pedagogical challenges, including the lack of experience and student engagement, were the main essential challenges to adapting online education in higher education institutions during the COVID-19 outbreak.

     

Resource-constrained FPGA implementation of YOLOv2

Neural Computing and Applications - Progress is being made to deploy convolutional neural networks (CNNs) into the Internet of Things (IoT) edge devices for handling image analysis tasks locally....     

Theoretical Investigation of Cubic BaVO<Subscript>3</Subscript> and LaVO<Subscript>3</Subscript> Perovskites via Tran–Blaha-Modified Becke–Johnson Exchange Potential Approach

The full potential linearized augmented plane wave method of density functional theory has been used to investigate the structural, electronic, magnetic and thermoelectric properties of cubic perovskites BaVO₃ and LaVO₃. The ferromagnetic ground state has been found to be stable by comparing the total energies of non-spin-polarized and spin-polarized calculations performed for optimized unit cells. For both compounds, the bond length and tolerance factor are also measured. From the band structures and density of states plots, it is found that both compounds are half-metallic. We found that the presence of V at the octahedral site of these perovskites develops exchange splitting through p-d hybridization, which results in a stable ferromagnetic state. The observed exchange splitting is further clarified from the magnetic moment, charge and spin of the anion and cations. Finally, we also presented the calculated thermoelectric properties of these materials, which show that half-metallic BaVO₃ and LaVO₃ materials are potential contenders for thermoelectric applications.     

Co‐condensation synthesis of well‐defined mesoporous silica nanoparticles: effect of surface chemical modification on plasmid DNA condensation and transfection

Chemically modified mesoporous silica nanoparticles (MSNs) are of interest due to their chemical and thermal stability with adjustable morphology and porosity; therefore, it was aimed to develop and compare the MCM‐41 MSNs functionalised with imidazole groups (MCM‐41‐Im) to unmodified (MCM‐41‐OH) and primary amine functionalised (MCM‐41‐NH₂) MSNs for experimental gene delivery. The results show efficient transfection of the complexes of the plasmid and either MCM‐41‐NH₂ or MCM‐41‐Im. Furthermore, following transfection of HeLa cells using MCM‐41‐Im, an enhanced GFP expression was achieved consistent with the noticeable DNase1 protection and endosomal escape properties of MCM‐41‐Im using carboxyfluorescein tracer.Inspec keywords: condensation, mesoporous materials, silicon compounds, nanoparticles, DNA, surface chemistry, porosity, gene therapy, cellular biophysics, biomedical materials, nanomedicine, nanofabrication, molecular biophysics, biochemistryOther keywords: co‐condensation synthesis, surface chemical modification, plasmid DNA condensation, plasmid DNA transfection, chemical modified mesoporous silica nanoparticles, chemical stability, thermal stability, adjustable morphology, porosity, MCM‐41 MSN functionalisation, imidazole groups, MCM‐41‐OH, primary amine functionalised MSN, gene delivery, HeLa cell transfection, GFP expression, DNase1 protection, endosomal escape properties, carboxyfluorescein tracer, SiO₂      

Mechanism study of silver nanoparticle production using Neurospora intermedia

Elucidation of the molecular mechanism of silver nanoparticle (AgNP) synthesis is necessary to control nanoparticle size, shape, and monodispersity. In this study, the mechanism of AgNP formation by Neurospora intermedia was investigated. The higher production rate of AgNP formation using a culture supernatant heat‐treated at 100° and 121°C relative to that with an un‐treated culture supernatant indicated that the native form of the molecular species is not essential. The effect of the protein molecular weight (MW) on the nanoparticle size distribution and average size was studied by means of ultraviolet–visible spectroscopy and dynamic light scattering. Using un‐treated and concentrated cell‐free filtrate passed through 10 and 20 kDa cut‐off filters led to the production of AgNPs with average sizes of 25, 30, and 34 nm, respectively. Also, using the permeate fraction of cell‐free filtrate passed through a 100 kDa cut‐off filter led to the formation of the smallest nanoparticles with the narrowest size distribution (average size of 16 nm and polydispersity index of 0.18). Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis of the fungal extracellular proteins showed two notable bands with the MWs of 15 and 23 kDa that are involved in the reduction and stabilisation of the nanoparticles, respectively.Inspec keywords: silver, nanoparticles, nanofabrication, proteins, molecular weight, ultraviolet spectra, visible spectra, cellular biophysics, electrophoresis, molecular biophysicsOther keywords: Neurospora intermedia, molecular mechanism, silver nanoparticle synthesis, nanoparticle shape, nanoparticle monodispersity, AgNP formation, untreated culture supernatant, molecular species, protein molecular weight, MW, nanoparticle size distribution, ultraviolet‐visible spectroscopy, dynamic light scattering, untreated cell‐free filtrate, concentrated cell‐free filtrate, cut‐off filters, permeate fraction, polydispersity index, Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis, fungal extracellular proteins, nanoparticle reduction, nanoparticle stabilisation, temperature 100 degC, temperature 121 degC, size 25 nm, size 30 nm, size 34 nm, size 16 nm, Ag     

Green synthesised zinc oxide nanostructures through Periploca aphylla extract shows tremendous antibacterial potential against multidrug resistant pathogens

To grapple with multidrug resistant bacterial infections, implementations of antibacterial nanomedicines have gained prime attention of the researchers across the globe. Nowadays, zinc oxide (ZnO) at nano‐scale has emerged as a promising antibacterial therapeutic agent. Keeping this in view, ZnO nanostructures (ZnO‐NS) have been synthesised through reduction by P. aphylla aqueous extract without the utilisation of any acid or base. Structural examinations via scanning electron microscopy (SEM) and X‐ray diffraction have revealed pure phase morphology with highly homogenised average particle size of 18 nm. SEM findings were further supplemented by transmission electron microscopy examinations. The characteristic Zn–O peak has been observed around 363 nm using ultra‐violet–visible spectroscopy. Fourier‐transform infrared spectroscopy examination has also confirmed the formation of ZnO‐NS through detection of Zn–O bond vibration frequencies. To check the superior antibacterial activity of ZnO‐NS, the authors'' team has performed disc diffusion assay and colony forming unit testing against multidrug resistant E. coli, S. marcescens and E. cloacae. Furthermore, protein kinase inhibition assay and cytotoxicity examinations have revealed that green fabricated ZnO‐NS are non‐hazardous, economical, environmental friendly and possess tremendous potential to treat lethal infections caused by multidrug resistant pathogens.Inspec keywords: nanomedicine, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, scanning electron microscopy, X‐ray diffraction, antibacterial activity, transmission electron microscopy, particle size, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, enzymes, biochemistry, molecular biophysics, microorganisms, drugs, toxicology, bonds (chemical), semiconductor growth, nanofabrication, vibrational modesOther keywords: green synthesised zinc oxide nanostructures, Periploca aphylla extract, antibacterial potential, multidrug resistant pathogens, multidrug resistant bacterial infections, antibacterial nanomedicines, P. aphylla aqueous extract, structural examinations, scanning electron microscopy, X‐ray diffraction, pure phase morphology, homogenised average particle size, SEM, transmission electron microscopy, Fourier‐transform infrared spectroscopy, bond vibration frequency, antibacterial activity, disc diffusion assay, colony forming unit testing, S. marcescens, E. cloacae, E. coli, ultraviolet‐visible spectroscopy, protein kinase inhibition assay, cytotoxicity, lethal infections, ZnO     

Generalized thermoelastic diffusion in a nanoscale beam using eigenvalue approach

In this paper, the effect of mass diffusion in a thermoelastic nanoscale beam in context Lord and Shulman theory is studied. The analytical solution in the Laplace domain is obtained for lateral deflection, temperature, displacement, concentration, stress and chemical potential. The both ends of the nanoscale beam are simply supported. The basic equations have been written in the form of a vector-matrix differential equation in the Laplace transform domain, which is then solved by an eigenvalue approach. The results obtained are presented graphically for the effect of time and mass diffusion to display the phenomena physical meaning.     

The experimental and numerical impacts of geometrical parameters of conical shock tube on the function,maximum pressure and generative impulses to expose equivalent mass and behavioral equation

One of the methods to investigate the phenomenon of explosion underwater and its impact on the structures is to use the conical shock tube. These tubes produce a lot of pressure using a tiny explosive charge. In this essay, the geometry of the established/manufactured explosive shock tube is demonstrated first and the results of the experiments operating the tube is presented. Then, the explosion of a given amount of explosive charge in the conical shock tube is studied by benefiting the LS‐DYNA code. The numerical simulation is done by Lagrange‐Oiler selected multi‐materials solutions. To ensure the authenticity of the selected method in the software, the results of the stimulated model is compared with the experimental outcomes accordingly, after accrediting the accuracy of the results, the stimulating and scrutinizing the effects of geometrical parameters on the function of explosive shock tubes is proceeded. In this research, the effect of the cone head angel on the produced pressure inside the shock tube is analyzed first. Then, the function of shock tubes with different lengths is checked. Moreover, after changing the scale of the explosive charge and studying the outcome, stating the reasons for changes in each parameter and examining the effect of the relation between the explosive proportion and the water volume inside the shock tube, an equation for the equivalent mass for all sock tubes with different angels is exhibited and the existing theoretical relation is revised. Finally, by examining the pressure and impulses changes in different intervals, an equation is presented to anticipate the pressure and impulses in different shock tubes.     

Novel method to transform ZnO nanorods into interlaced tattered nanosheets by changing the target inclination angle

ZnO nanoparticles were synthesized by liquid-phase pulse laser ablation of a Zn foil target immersed in deionized water. Nanosecond Q-switched Nd:YAG laser pulses of 532 nm were applied to the Zn foil target at a perpendicular and inclined (θ = 45°) angles. X-ray diffraction analysis revealed that both cases feature a ZnO nanostructure with a hexagonal wurtzite structure and that the particle size increases with the inclined target angle. Field emission scanning electron microscopy results of a colloidal drop cast on a glass substrate showed the ZnO has a nanorod structure in the case of a perpendicular target angle and an interlaced tattered nanosheet structure in the case of an inclined target angle. Photoluminescence spectra showed emission peaks in the UV, violet, blue, and green spectral regions, which correspond to excitonic and various defects resulting in an enhancement of emissions at inclined target angle.