Effect of amphiphilic compatibilizers on the filler dispersion and properties of polyethylene—thermally reduced graphene nanocomposites

Compatibilizers of different chemical structures and specifications were used to enhance the filler exfoliation in nanocomposites of polyethylene and thermally reduced graphene prepared by melt mixing route. The mechanical performance of the compatibilized nanocomposites was observed to be better than PE/G nanocomposites due to enhanced extent of filler exfoliation and distribution. Highest increase of 45% in tensile modulus and 13% in peak stress was observed in the composites. Overall, from the mechanical, rheological, thermal, and calorimetric properties, the compatibilizers with best performance were ethylene acrylic acid (EAA) copolymer and chlorinated polyethylene (CPE25). Furthermore, the extent of filler exfoliation was observed to increase with increasing EAA content thus confirming positive interactions between EAA and thermally reduced graphene, though no specific chemical interactions could be detected. The composite properties were observed to reach maximum around 7.5 wt % EAA content, followed by reduced performance due to extensive matrix plasticization. The observed behaviors were a result of interplay of opposing factors like filler exfoliation due to compatibilizer addition and matrix plasticization due to its lower molecular weight, thus the observed optimum comaptibilizer amount was specific to the compatibilizer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42484.     

New Synthetic Control Charts for Monitoring Process Mean and Process Dispersion

A statistical quality control chart is widely recognized as a potentially powerful tool that is frequently used in many manufacturing and service industries to monitor the quality of the product or manufacturing processes. In this paper, we propose new synthetic control charts for monitoring the process mean and the process dispersion. The proposed synthetic charts are based on ranked set sampling (RSS), median RSS (MRSS), and ordered RSS (ORSS) schemes, named synthetic‐RSS, synthetic‐MRSS, and synthetic‐ORSS charts, respectively. Average run lengths are used to evaluate the performances of the control charts. It is found that the synthetic‐RSS and synthetic‐MRSS mean charts perform uniformly better than the Shewhart mean chart based on simple random sampling (Shewhart‐SRS), synthetic‐SRS, double sampling‐SRS, Shewhart‐RSS, and Shewhart‐MRSS mean charts. The proposed synthetic charts generally outperform the exponentially weighted moving average (EWMA) chart based on SRS in the detection of large mean shifts. We also compare the performance of the synthetic‐ORSS dispersion chart with the existing powerful dispersion charts. It turns out that the synthetic‐ORSS chart also performs uniformly better than the Shewhart‐R, Shewhart‐S, synthetic‐R, synthetic‐S, synthetic‐D, cumulative sum (CUSUM) ln S², CUSUM‐R, CUSUM‐S, EWMA‐ln S², and change point CUSUM charts for detecting increases in the process dispersion. A similar trend is observed when the proposed synthetic charts are constructed under imperfect RSS schemes. Illustrative examples are used to demonstrate the implementation of the proposed synthetic charts. Copyright © 2014 John Wiley & Sons, Ltd.     

An Improved Maximum Exponentially Weighted Moving Average Control Chart for Monitoring Process Mean and Variability

Maximum exponentially weighted moving average (MaxEWMA) control charts have gained considerable attention for detecting changes in both process mean and process variability. In this paper, we propose an improved MaxEWMA control charts based on ordered ranked set sampling (ORSS) and ordered imperfect ranked set sampling (OIRSS) schemes for simultaneous detection of both increases and decreases in the process mean and/or variability, named MaxEWMA‐ORSS and MaxEWMA‐OIRSS control charts. These MaxEWMA control charts are based on the best linear unbiased estimators of location and scale parameters obtained under ORSS and OIRSS methods. Extensive Monte Carlo simulations have been used to estimate the average run length and standard deviation of run length of the proposed MaxEWMA control charts. These control charts are compared with their counterparts based on simple random sampling (SRS), that is, MaxEWMA‐SRS and MaxGWMA‐SRS control charts. The proposed MaxEWMA‐ORSS and MaxEWMA‐OIRSS control charts are able to perform better than the MaxEWMA‐SRS and MaxGWMA‐SRS control charts for detecting shifts in the process mean and dispersion. An application to real data is provided to illustrate the implementation of the proposed MaxEWMA control charts. Copyright © 2013 John Wiley & Sons, Ltd.     

Survey on communication architectures for wind energy integration with the smart grid

Communication systems are needed to integrate generated power from wind farms with the electrical grid. This paper provides a comprehensive review of available communication technologies, protocols and objectives related to wind energy and electrical grid integration. This paper summarizes the communication system solutions for wind generation. A major obstacle is an absence of unified communication architectures and standards.     

Exploring the internationalization of Malaysian contractors: the international entrepreneurship dimension

The internationalization of construction companies is a subject of enduring interest among construction management scholars. The internationalization pattern of Malaysian contractors was explored, this time mainly using the international entrepreneurship body of literature as the theoretical basis. In doing so, the focus of the internationalization process was on the entrepreneurs or top management. Data were collected with a postal questionnaire survey and follow‐up semi‐structured interviews. The findings underscore the importance of the entrepreneurs’ decision in the surveyed firms’ internationalization trajectory. Top management’s perception of how their companies might benefit from internationalization was the highest ranked foreign market entry consideration. Top managements’ initial and subsequent motivation also fashioned their companies’ degree of internationalization and tactics for securing contracts. The characteristics of the entrepreneurs which drove their companies to internationalize were also captured. The international entrepreneurship domain continues to expand into previously uncharted areas. As such there is potential to uncover even more interesting findings from future research endeavours on international contractors using the international entrepreneurship approach.     

Investigation of the impact of global warming on precipitation pattern of Saudi Arabia

This study has been carried out to forecast the impact of global warming on the precipitation pattern of Saudi Arabia by the end of year 2100. Simulation has been done using EdGCM model software (with available 8×10 resolution) developed at Columbia University on which there have been produced global precipitation maps for the seasonal and annual averages for the last 5 years (2096–2100). For each map, EdGCM grid values surrounding Saudi Arabia are used as input to one of the tools of Eagle point software called surface modelling (SM). SM is a new approach for downscaling global climate model results. SM software modelled out isohyets at 0.2 mm/day interval. The results indicate that the present pattern of precipitation (more in winter and less in summer) is going to change by almost equal occurrence of precipitation in all seasons for double_CO₂ (2CO₂) experiment. The 2CO₂ experiment indicates an increase of about 16.05% over the annual average precipitation across the country.     

The effect of combined use of chitosan and PIPS on push-out bond strength of root canal filling materials

Adhesion of root canal filling materials to root dentin is important for the long-term success of the treatment. Push-out bond strength test is used to evaluate the adhesion capacity of root canal filling materials to root canal walls. The aim of the present study is to compare the bond strength of root canal filling materials to root dentin after irrigation with EDTA, chitosan and the combination of chitosan and PIPS irridation using push-out bond strength test. Forty-eight extracted teeth were resected until 13-mm long roots were obtained. Root canals were prepared with a size-25 OneShape instrument. Samples were divided into three groups each including 15 roots. Group 1: Canals were rinsed with 0.2% chitosan and subjected to laser irridation with PIPS at the same time. Group 2: Canals were rinsed with 0.2% chitosan. Group 3: Canals were rinsed with EDTA. All canals were filled with .06 tapered gutta-percha and AH-plus sealer. One-mm thick slices were taken from coronal, middle and apical one-thirds of the roots. Push-out bond strength was determined using a Universal Testing Machine. One root from each group was observed under SEM to evaluate the degree of smear removal. Statistical analysis was performed with Kruskall-Wallis test. Results showed that bond strength values were statistically similar in overall evaluation for all groups (p > .05). In segmental evaluation, group 1 revealed the highest bond strength in apical one-third compared to other groups (p < .05).