Neural computing models for prediction of permeability coefficient of coarse-grained soils

Correlations are very significant from the earliest days; in some cases, it is essential as it is difficult to measure the amount directly, and in other cases it is desirable to ascertain the results with other tests through correlations. Soft computing techniques are now being used as alternate statistical tool, and new techniques such as artificial neural networks, fuzzy inference systems, genetic algorithms, and their hybrids were employed for developing the predictive models to estimate the needed parameters, in the recent years. Determination of permeability coefficient (k) of soils is very important for the definition of hydraulic conductivity and is difficult, expensive, time-consuming, and involves destructive tests. In this paper, use of some soft computing techniques such as ANNs (MLP, RBF, etc.) and ANFIS (adaptive neuro-fuzzy inference system) for prediction of permeability of coarse-grained soils was described and compared. As a result of this paper, it was obtained that the all constructed soft computing models exhibited high performance for predicting k. In order to predict the permeability coefficient, ANN models having three inputs, one output were applied successfully and exhibited reliable predictions. However, all four different algorithms of ANN have almost the same prediction capability, and accuracy of MLP was relatively higher than RBF models. The ANFIS model for prediction of permeability coefficient revealed the most reliable prediction when compared with the ANN models, and the use of soft computing techniques will provide new approaches and methodologies in prediction of some parameters in soil mechanics.     

Corrosion behavior of carbon steel rock bolt in simulated Yucca Mountain ground waters

Medium carbon steel (AISI 1040) was one of the candidate materials for rock bolts to reinforce the borehole liners and emplacement drifts of the high-level nuclear waste repository in Yucca Mountain. The corrosion performance of this structural steel was investigated by techniques such as linear polarization, electrochemical impedance spectroscopy (EIS), and laboratory immersion tests in simulated ground waters. The corrosion rates of the steel were measured for the temperatures in the range from 25 °C to 85 °C, for the ionic concentrations of 1 time (1×), 10 times (10×), and a hundred times (100×) ground water concentration. The steel corroded uniformly at penetration rates of 35 to 200 μm/year in the deaerated waters, and at 200 to 1000 μm/year in the aerated waters. Increasing temperatures in the deaerated waters increased the corrosion rate of the steel. However, increasing ionic concentrations influenced the corrosion rate only slightly. In the aerated 1×and 10×waters, increasing temperatures increased the rates of the steel significantly. In the aerated 100×waters, the corrosion rate increased from 25 °C to 45 °C and decreased at higher temperatures (65 °C and up) due to the formation of oxide/hydroxide films and salt scales on the surface of the steel specimen. The steel suffered pitting corrosion in the both deaerated and aerated hot ground water environments after anodic polarization. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the. TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

Layered precursors for new zeolitic materials: Synthesis and characterization of B-RUB-39 and its condensation product B-RUB-41

Condensation of layered silicate precursors leads to new, all silica zeolite frameworks. In order to introduce catalytic functionality, boron has been substituted into the silicate layer of RUB-39 in a single step synthesis process. Condensation of the silicate layer to the zeolite framework of RUB-41, RRO framework structure type, preserved B as constituent of the material. Analysis of structural details obtained from Rietveld analysis of powder diffraction data, ¹¹B and ²⁹Si NMR experiments of the as synthesized precursor as well as of the zeolite condensation product, and crystal chemical reasoning indicates segregation of B on one specific T-site. This T-site is buried in the silicate anionic layer of the precursor shielding the additional negative charge introduced by the trivalent T-atom.     

The electrical and dielectric characterization of the Co/ZnO-Rods/p-Si heterostructure depending on the frequency

Journal of Materials Science: Materials in Electronics - Zinc oxide (ZnO) rods film was fabricated by homemade and simple spray pyrolysis technique on a p-type silicon (Si) substrate, and the film...     

Layer-by-layer self-assembly of multifunctional enzymatic UF membranes

In order to eliminate membrane fouling and to ensure enzymatic hydrolysis of urea, multifunctional biocatalytic membranes were prepared by using urease (URE) and trypsin (TRY) enzymes on the sulfonated polysulfone (SPSf) ultrafiltration membrane via layer-by-layer (LbL) self-assembly method. The membrane architecture consisted of multilayer assembly with TRY and URE enzymes as the outer layer and inner sandwiched layer, respectively. Polyethyleneimine (PEI) and alginate (ALG) were used as cationic and anionic polyelectrolytes. Sulfonation and PEI deposition were successfully accomplished as confirmed by attenuated total reflectance Fourier transform infrared spectroscopy, differential scanning calorimetry (DSC) and scanning electron microscopy analysis, contact angle measurements, staining with toluidine blue and Congo red dyes and dead-end filtration experiments. A characteristic value of SPSf membrane with a high water permeability (1000 L/m².h.bar) and 95% bovine serum albumin (BSA) rejection was observed. In static conditions, URE activities of SPSf2-PEI-URE membrane were not affected by BSA fouling, while TRY immobilizations with increased concentrations (SPSf2-PEI-URE-PEI-ALG-TRY) significantly lowered the activity of URE. In dynamic conditions, each deposited layer exhibited individual resistance to flow that can be considered as irreversible fouling and caused 90% of flux decline for the SPSf2-PEI-URE-PEI-ALG-TRY membrane assembly. The recovery of the initial flux for the multilayered membrane at the end of six fouling and washing cycles was observed 85%. Moreover, at the end of 5 cycles, 78% of the URE initial activity of the multilayered membrane was preserved. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48750.     

Estimating crown diameters in urban forests with Unmanned Aerial System-based photogrammetric point clouds

Field measurements are the main source of information when determining stand parameters, which are essential to produce an effective forest management plan. However, conducting terrestrial measurements is neither time- nor cost-efficient in most cases. In recent years, the advent of sophisticated remote sensing technologies has enabled the extraction of accurate and robust information about the physical characteristics of trees. Crown diameter is one of the most important stand parameters that should be measured or estimated. This study proposes a Polynomial Fitting Based (PFB) methodology to estimate crown diameters of urban trees with Unmanned Aerial System (UAS)-based data. Crown diameters estimated with the PFB methodology were compared not only to a reference data but also to those estimated based on five widely used image segmentation algorithms, which were the Mean Shift Segmentation (MSS), Morphological Profiles Based Segmentation (MPBS), Multiresolution Segmentation (MRS), Seeded Region Growing Segmentation (SRGS) and Watershed Segmentation (WS). Quantitative investigations revealed that the PFB approach outperformed the other segmentation-based approaches. The PFB approach estimated the crown diameters with root-mean-square errors (RMSE) ranging from 0.69 m to 0.92 m. The PFB methodology was found to be a practical and robust approach for the estimation of crown diameters, which plays a very significant role in effective forest management.     

Towards more active and stable PdAgCr electrocatalysts for formic acid electrooxidation: The role of optimization via response surface methodology

In this study, multiwall carbon nanotube (MCNT)‐supported Pd (Pd/MWCNT) catalysts are prepared by using NaBH₄ reduction method. In order to maximize the oxidation and reduction of H₂SO₄, synthesis conditions (Pd ratio, molar ratio of NaBH₄/K₂PdCl₄, volume of deionized water, and duration of agitation) are optimized by using response surface methodology (RSM). The optimum synthesis conditions are determined as 58.2% of Pd by weight, 154.6 molar ratio of NaBH₄ to K₂PdCl₄, 19.48 mL of deionized water, and 186.16 min of agitation duration. The effect of electrochemical measurement conditions on the oxidation kinetics of Pd/MWCNT is also investigated by RSM. The optimum electrochemical measurement conditions are found as 10 μL of catalyst mixture, 90°C of H₂SO₄ solution, and 5.5 M H₂SO₄. The Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts prepared under optimized conditions are characterized by using X‐ray diffraction, transmission electron microscopy, N₂ adsorption‐desorption, and inductively coupled plasma mass spectrometry. The crystallite sizes of these catalysts are found as 4.85, 5.66, and 5.26 nm for Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts, respectively. Isotherms of all these catalysts are found to be similar to Type V isotherms with H3 hysteresis loop. The average particle size of Pd₅₀Ag₅₀/MWCNT and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts are determined as 5.2 and 9.2 nm, respectively. Electrochemical performance of as‐prepared catalysts is evaluated by using cyclic voltammetry and chronoamperometry. The formic acid electrooxidation (FAEO) activities are found as 18.9, 27.8, and 51.6 mA/cm² for Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT, respectively. Pd_65.6Ag_33.6Cr_0.80/MWCNT shows the highest activity and stability. Optimization of synthesis conditions and electrochemical measurement parameters allow us to obtain very good electrochemical activity and stability for FAEO reaction compared with anode catalysts in the literature.     

House Prices as a Result of Trading Activities: A Patient Trader Model

Computational Economics - We present a new modeling approach for house price movements as a consequence of the trading behavior of market agents. In our modeling approach, all agents are assumed to...