Evidence of PAH production under lean combustion conditions

While it is common knowledge that PAH formation can be expected at rich combustion conditions, this paper presents experimental and computational evidence that PAH formation can also be expected under lean, or cool, combustion conditions. Experimental evidence for diesel engine operation at lean conditions, as well as the literature references related to waste tire and coal combustion, are cited as supportive evidence of conclusions drawn here. A computational model based on reaction mechanisms for three surrogate fuels: C₂H₂, C₇H₁₆ and C₁₄H₂₈, was validated against the available diesel engine data, and projected to both lean and rich combustion conditions. The finding was that for the adiabatic case, minimum production of PAHs occurs at equivalence of unity and increases as equivalence becomes either lean or rich; the latter observation being consistent with the common knowledge.     

Characteristics of CFRP retrofitted hollow brick infill walls of reinforced concrete frames

The mechanical characteristics of infill walls retrofitted with carbon fiber reinforced polymer (CFRP) sheets are really important for the realistic prediction of seismic performance of the vulnerable reinforced concrete (RC) frames retrofitted through CFRP strengthened infill walls. In this study, 36 hollow brick wall specimens were tested either under uniaxial compression or diagonal tension before and after retrofitting externally with CFRP sheets. The test parameters are the dimensions of the walls, the orientation of holes of bricks, the type of mortar, the amount of CFRP sheets and the details of strengthening application. At the end of the tests, a significant contribution of CFRP sheets on the mechanical characteristics of hollow brick walls was observed in terms of several important structural design parameters such as Young and shears moduli, axial and shears strengths as well as the deformation capacity. Finally, the strength and deformability characteristics of the walls and frames retrofitted with CFRP sheets were predicted analytically. The predictions were in good agreement with the experimental data.     

Note-against-note two-voice counterpoint by means of fuzzy logic

In this study, we propose a fuzzy logic based approach for the ‘harmonization with constraints’ problem in music. After the mathematical modeling of the harmonization problem, the solution is carried out by means of proper fuzzy membership functions depending on the rules imposed by the music theory. To demonstrate the applicability of the proposed technique, particular problems of note-against-note two-voice counterpoint are considered. The method is flexible, adaptable and simple in terms of implementation. Moreover, from the constraint satisfaction perspective, the solutions generated by the method satisfy ‘arc-consistency’; which could not have been achieved by majority of the previous studies existing in the literature. The method also provides a gateway for the arranger/composer to incorporate his/her own stylistic preferences to the solution by simply adjusting the shapes of the membership functions. Additional features (such as providing variability in the final solutions at different executions) increase the power of the method in terms of creativity. This approach can be extended for the solution of more complicated problems in music such as orchestration, improvisation, and even composition.     

Efficient power analysis for an irreversible Carnot heat engine

In this paper, the finite‐time thermodynamic optimization is carried out based on the efficient power criterion for an irreversible Carnot heat engine. The obtained results are compared with those obtained by using the maximum power (MP) and maximum power density (MPD) criteria. The optimal design parameters have been derived analytically, and the effect of the irreversibilities on the general and optimal performances is investigated. Maximizing the efficient power gives a compromise between power and efficiency. The results showed that the design parameter at the maximum efficient power (MEP) condition leads to more efficient engines than at the MP conditions and that the MEP criterion may have a significant power advantage with respect to the MPD criterion. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of technological factors on formulation of sustained release tablets

Theoretically expected rates of release of solid drugs incorporated into solid matrices have been derived for several model systems. Mathematical relations have been obtained for cases (a) where the drug particles are dispersed in a homogeneous, uniform matrix which acts as the diffusional medium and (b) where the particles are incorporated in an essentially granular matrix and released by the leaching action of the penetrating solvent. A number of technological factors are influencing the formulation of sustained release tablets. It was found that the choice of matrix material, amount of drug incorporated in matrix, matrix additives, the hardness of the tablet, density variation, and tablet shape could markedly affect the release rate and also the formulation.     

Electrorheological properties of kaolinite,polyindole, and polyindole/kaolinite composite suspensions

In this study, polyindole (PIN) and polyindole/kaolinite (PIN/KAO) composite were synthesized by free radical polymerization using FeCl₃ as an initiator. Average particle sizes (d₅₀) of PIN and PIN/KAO composite were determined by dynamic light scattering (DLS) as 7.2 and 6.2 μm, respectively. The samples were characterized by FTIR, elemental analysis, DSC/TGA and SEM measurements. Suspensions of KAO, PIN, and PIN/KAO composite were prepared in silicone oil (SO) and the sedimentation stabilities were determined. Electrorheological (ER) properties of these suspensions were studied as a function of dispersed phase concentration, shear rate, shear stress, and temperature; and yield stresses and excess shear stresses determined. Further, dielectric properties of KAO, PIN, and PIN/KAO composite were investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Competitive Randomized Nonlinear Prediction Under Additive Noise

We consider sequential nonlinear prediction of a bounded, real-valued and deterministic signal from its noise-corrupted past samples in a competitive algorithm framework. We introduce a randomized algorithm based on context-trees . The introduced algorithm asymptotically achieves the performance of the best piecewise affine model that can both select the best partition of the past observations space (from a doubly exponential number of possible partitions) and the affine model parameters based on the desired clean signal in hindsight. Although the performance measure including the loss function is defined with respect to the noise-free clean signal, the clean signal, its past samples or prediction errors are not available for training or constructing predictions. We demonstrate the performance of the introduced algorithm when applied to certain chaotic signals.      

Determination of bioclimatic comfort in three different land uses in the city of Erzurum,Turkey

This study was carried out to determine the human bioclimatic conditions in rural, urban and urban forest areas in the conditions of the city of Erzurum, where an extreme continental climate type prevails. Data were obtained over a 10-month period and human bioclimatic conditions in these three different land-use types were evaluated using human bioclimatic indices, suitable for the data obtained. In the study, thermohygrometric index (THI), which assesses air temperature and relative humidity, and “beer garden days” index, which uses the days when temperature at 21:00 is over 20 °C, were used. While in these three areas “hot” and “comfort” ranges were determined to be 10% of the period, the number of “beer garden” days was only 20 days in rural, 15 days in urban forest and 18 days in urban areas of Erzurum. Consequently, it has been determined that the most suitable area for the human comfort in the conditions of Erzurum is in the urban area which is followed by the urban forest and the rural areas, both for each observation time and across the whole period.