Study on effect of diverse air inlet arrangement on thermal management of cylindrical lithium-ion cells

Lithium-ion cells are preferred in the electrical powertrain due to high-power density, compactness, and modularity. In real driving conditions, the cells undergo discharge rates as high as 4 C resulting in high heat generation affecting the performance. To obtain the maximum performance the pack construction and thermal management of cells are crucial parameters. In our work, air-cooled technique with diverse air inlet and staggered scheme with a two-channel partition approach for thermal management of the cylindrical lithium-ion cells are studied in computational fluid dynamics. The simulation model is validated with experimental results. The obtained results demonstrate that the cells in the dual-directional air inlet arrangement had low maximum temperature difference among and within the cells and required least fan work. This arrangement required least fan work to generate optimal air inlet velocity of 2 m/s for 1, 2, and 3 C and 4 m/s for 4 C discharge rates. There is a reduction of 50% and 33% fan work for 3 and 4 C discharge rates, which are the majority operating points. Also, it shows that the temperature uniformity within the cells has improved. The results of this study can used to optimize parameters for designing an enhanced thermal management system.     

Two Channel Thermally Tunable Band-Stop Filter for Wavelength Selective Switching Applications by Using 1D Ternary Superconductor Photonic Crystal

By studying temperature-dependent dispersion characteristics and group velocity of 1D ternary photonic crystal (TPC) composed of dielectric-superconductor-dielectric materials, a thermally tunable band-stop filter which is capable of stopping unique wavelength channels without causing any interference amongst equally spaced wavelength channels of full width at half maximum of 1 nm each as per the requirement of wavelength division multiplexing standards adopted by the International Telecommunication Union specifying channel spacing in terms of frequency (wavelength) is suggested. The proposed structure can efficiently work as a two-channel wavelength selective switch for wavelength division multiplexing (WDM)-based all-optical networks. This study also gives theoretical insight to design some new kind of optical memories and tunable buffers which holds data temporary and have potential applications in modern communication systems.     

Effect of relative humidity and light conditions on the oxidative stability of sunflower oil blends stabilised with synthetic and natural antioxidants

The effect of relative humidity (RH) and light conditions on the oxidative stability of sunflower oil (SO) stabilised with oleoresin rosemary + ascorbyl palmitate (SOR), sage + ascorbyl palmitate (SOS) and tertiary butyl hydroquinone (SOT) was investigated. The SO without additive (SOC) served as positive control. Oil samples were subjected to 3 RH (29%, 52% and 75%) and two light conditions (dark, D and fluorescent light (600 lx), L) at 60 °C for 7 days. The oxidative stability was monitored by peroxide value (PV), conjugated diene value (CDV), free fatty acids (FFAs) and Rancimat induction period (IP). A direct relationship was noted between RH and increase in PV, CDV and FFA levels irrespective of light conditions. The detrimental effect of light on the oxidative stability was prominently noted at higher RH (75%) which followed an order: SOC > SOT > SOR > SOS. The samples stored under lower RH (29% and 52%), and dark conditions were better stabilised than light‐exposed counterparts.     

Magneto-electro-elastic analysis of piezoelectric–flexoelectric nanobeams rested on silica aerogel foundation

This article explores that the study on bending of magneto-electric-elastic nanobeams relies on nonlocal elasticity theory. The Vlasov’s model foundation utilizes the silica aerogel foundation. The guiding expressions of nonlocal nanobeams in the considered framework are used extensively and where parabolic third-order beam theory is achieved after using Hamilton’s principle. Parametric work is introduced to scrutinize the influence of the magneto-electro-mechanical loadings, nonlocal parameter, and aspect ratio on the deflection characteristics of nanobeams. It is noticed that the boundary conditions, nonlocal parameter, and beam geometrical parameters have significant effects on dimensionless deflection of nanoscale beams.

     

Seismic Fragility of Steel Piping System Based on Pipe Size,Coupling Type,and Wall Thickness

In this study, a probabilistic framework of the damage assessment of pipelines subjected to extreme hazard scenario was developed to mitigate the risk and enhance design reliability. Nonlinear 3D finite element models of T-joint systems were developed based on experimental tests with respect to leakage detection of black iron piping systems, and a damage assessment analysis of the vulnerability of their components according to nominal pipe size, coupling type, and wall thickness under seismic wave propagations was performed. The analysis results showed the 2-inch schedule 40 threaded T-joint system to be more fragile than the others with respect to the nominal pipe sizes. As for the coupling types, the data indicated that the probability of failure of the threaded T-joint coupling was significantly higher than that of the grooved type. Finally, the seismic capacity of the schedule 40 wall thickness was weaker than that of schedule 10 in the 4-inch grooved coupling, due to the difference in the prohibition of energy dissipation. Therefore, this assessment can contribute to the damage detection and financial losses due to failure of the joint piping system in a liquid pipeline, prior to the decision-making.     

Investigation of structural,optical, and magnetic properties of Nd-doped Sr2SnO4 Ruddlesden Popper oxide

The samples of Sr_2-xNd_xSnO₄ with x = 0, 0.01, 0.02, 0.04, 0.06, and 0.10 were synthesized by a high-temperature solid-state ceramic route. Rietveld refining of X-ray diffraction results showed that all the synthesized compositions are single phase under tetragonal crystal structure. The presence of functional group and local structure has been studied using FTIR and Raman spectroscopy, respectively. XPS study of samples showed the presence of oxygen vacancy and interstitial oxygen in the sample. Optical band gap of samples analyzed by UV-Vis spectra gradually increases with dopant concentration, and Photoluminescence (PL) spectroscopy study showed most intense emission around 1064 nm. Room-temperature magnetic hysteresis curve in sample SSN2 showed ferromagnetism, slowly decreasing with Nd and becoming antiferromagnetic for higher compositions. Utilizing the absorption state observed in PL as metastable state makes it promising candidate for laser and IR detector application and the ferromagnetic/antiferromagnetic nature of sample makes it suitable candidate for spintronics device applications.     

Preparation of rice analogues using extrusion technology

Rice is considered as staple food in many parts of the world. An issue of concern is the breakage of rice kernels in milling processes, and these broken kernels are not generally accepted by consumers. These broken kernels can be mixed with some desired additives to improve their quality and extruded for the preparation of reconstituted rice kernels or rice analogues. Various studies have been conducted for the preparation of the rice analogues in the past few decades, and recently attempts have been made to fortify these analogues with protein, certain vitamins and minerals. The main features such as colour, shape, size, texture, and cooking characteristics and cooking time of these rice‐like grains can be tailored to the requirements of specific applications by modification of the extrusion parameters. Various organisations, such as Wuxi NutriRice Co. (DSM/Buhler) and China National Cereals, Oils and Foodstuffs Corporate (COFCO), Superlative Snacks Inc., Vigui and PATH, have utilised this technique to prepare fortified and reconstituted rice. Studies have shown that it is possible to improve the nutritional quality of rice by fortified rice analogues. This article reviews research results of the many approaches to the formation of fortified rice analogues by extrusion‐based technologies.