Effect of BiAlO3 concentration on the dielectric and piezoelectric properties of lead-free (Bi0.5Na0.5)0.94Ba0.06TiO3 piezoelectric ceramics

In this paper, lead-free (1-x)(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-xBiAlO₃ (BNBT-BA, x?=?0, 0.010, 0.015, 0.020, 0.025, and 0.030) piezoelectric ceramics were synthesized using a conventional solid-state reaction method. The effect of BiAlO₃ concentration on dielectric, ferroelectric and piezoelectric properties were investigated. The ferroelectric and piezoelectric properties of BNBT ceramics are significantly influenced by the presence of BA. In the composition range studied, X-ray diffraction revealed a perovskite phase with the coexistence of rhombohedral and tetragonal phases. The temperature dependence of dielectric properties showed that the depolarization temperature (T _d) shifted towards lower temperatures and that the degree of diffuseness of the phase transition around T _d and T _m became more obvious with increasing BiAlO₃ content. The remanent polarization increased with increasing BA, and reached a maximum value of 30 μC/cm² at x?=?0.020. As a result, at x?=?0.020, the piezoelectric constant (d ₃₃) and the electromechanical coupling factor (k _p) of the ceramics attained maximum values of 188 pC/N and 34.4 %, respectively. These results indicate that BNBT-BA ceramics is a promising candidate for lead-free piezoelectric materials.     

Evaluation of reclaimed asphalt pavement binder stiffness without extraction and recovery

A new testing procedure to estimate the low-temperature stiffness of the reclaimed asphalt pavement(RAP) binder was developed.In the testing procedure,the SuperpaveTM Bending Beam Rheometer(BBR) with special modifications and binder blending charts by Asphalt Institute were utilized.Modifications involved the development of a new kind of sample mold and different testing parameters were made to BBR testing procedure to capture the rheological properties of bitumen mortars produced by mixing fresh binder wit...     

CMOS digitally programmable quadrature oscillators

CMOS digitally programmable quadrature oscillators based on digitally controlled current followers and voltage followers are proposed. The proposed designs provide the advantage of programmability similar to the operational transconductance amplifier‐based oscillators while offering improved linearity. In mixed analog/digital systems, the digital tuning feature allows direct interfacing with the digital signal processing part. Novel realizations that provide both voltage‐mode and current‐mode quadrature sinusoidal signals are presented. Employing only grounded capacitors the designs achieve independent control of the frequency and condition of oscillation that can be tuned digitally. Experimental results obtained from a 0.35 µm CMOS chip fabricated using standard CMOS process are given. Copyright © 2008 John Wiley & Sons, Ltd.     

Electromechanical properties of ternary BiFeO<Subscript>3</Subscript>−0.35BaTiO<Subscript>3</Subscript>–BiGaO<Subscript>3</Subscript> piezoelectric ceramics

In the present work, composition dependent crystal structure, ferroelectric, piezoelectric, and temperature dependent dielectric properties of the BiGaO₃-modified (1–x)(0.65Bi_1.05FeO₃–0.35BaTiO₃) (BFBT35–xBG, where x?=?0.00–0.03) lead-free ceramics were systematically investigated by solid-state reaction method, followed by water quenching process. The substitution of BG successfully diffuses into the lattice of the BFBT ceramics, without changing the pseudo-cubic structure of the samples. The scanning electron microscopy (SEM) results revealed that the average grain size was increased with BG-content in BFBT system. The BFBT–xBG ceramics showed a maximum in permittivity (?_max) at temperatures (T_max) above 500 °C in the compositional range of 0.00?≤?x?≤?0.03. The electro-strain is measured to be 0.125% (d^*₃₃ ~ 250 pm/V) under unipolar fields (5 kV/mm) for BFBT–0.01BG ceramics. The same composition (x?=?0.01), large static piezoelectric constant (d₃₃ ~ 165 pC/N) and electromechanical coupling factor (k_p ~ 25%) were obtained. The above investigated characterizations suggests that BFBT–BG material is favorable for piezoelectric and high temperature applications.     

Evolution of ferroelectric and piezoelectric response by heat treatment in pseudocubic BiFeO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript> ceramics

Heat treatment of ceramics is an important process to tailor the fine electromechanical properties. To explore the criteria for optimized heat treatment in a perovskite structure of (1–x)Bi_1.05FeO₃–xBaTiO₃ (BF–BT100x) system, the structural phase relation, ferroelectric and piezoelectric response of BF–BT36 and BF–BT40 ceramics prepared by furnace cooling (FC) and quenching process were investigated. The X-ray diffraction examination showed single pseudocubic perovskite structure for all the ceramics. The homogenous microstructure was obtained for all ceramics with relatively large grain size in the furnace cooled samples. Well saturated ferroelectric hysteresis loops and enhanced piezoelectric constant (d₃₃?=?97 pC/N) were achieved by quenching process. Dielectric curve of BF–BT36 showed large dielectric constant at its Curie temperature, however, BF–BT40 showed diffused relaxor-like dielectric anomalies. Quenched BF–BT36 samples showed typical butterfly like field induced strain curves, however negative strain decreased in BF–BT40 ceramics. From these investigated study, it is observed that BF–BT ceramics are very sensitive to the heat treatment process (furnace cooling and quenching) on the dielectric, electromechanical properties.     

DLSA: Delay and Link Stability Aware Routing Protocol for Flying Ad-hoc Networks (FANETs)

Flying Ad-hoc Network (FANET) is a new class of Mobile Ad-hoc Network in which the nodes move in three-dimensional (3-D) ways in the air simultaneously. These nodes are known as Unmanned Aerial Vehicles (UAVs) that are operated live remotely or by the pre-defined mechanism which involves no human personnel. Due to the high mobility of nodes and dynamic topology, link stability is a research challenge in FANET. From this viewpoint, recent research has focused on link stability with the highest threshold value by maximizing Packet Delivery Ratio and minimizing End-to-End Delay. In this paper, a hybrid scheme named Delay and Link Stability Aware (DLSA) routing scheme has been proposed with the contrast of Distributed Priority Tree-based Routing and Link Stability Estimation-based Routing FANET’s existing routing schemes. Unlike existing schemes, the proposed scheme possesses the features of collaborative data forwarding and link stability. The simulation results have shown the improved performance of the proposed DLSA routing protocol in contrast to the selected existing ones DPTR and LEPR in terms of E2ED, PDR, Network Lifetime, and Transmission Loss. The Average E2ED in milliseconds of DLSA was measured 0.457 while DPTR was 1.492 and LEPR was 1.006. Similarly, the Average PDR in %age of DLSA measured 3.106 while DPTR was 2.303 and LEPR was 0.682. The average Network Lifetime of DLSA measured 62.141 while DPTR was 23.026 and LEPR was 27.298. At finally, the Average Transmission Loss in dBm of DLSA measured 0.975 while DPTR was 1.053 and LEPR was 1.227.

     

Towards energy efficient duty cycling in underwater wireless sensor networks

Multimedia Tools and Applications - Underwater Wireless Sensor Networks devices are usually battery powered and thereby their lifetime is limited. This issue leads to lose data measurements and...     

Steps Towards Redesigning Cryptosystems by a Non-associative Algebra of IP-Loops

Wireless Personal Communications - In block ciphers, the substitution boxes (S-boxes) are used with the purpose to induce confusion in cryptosystems. For the last three decades most of algebraic...