Persistent thrombin generation in humans during specific thrombin inhibition with hirudin

BACKGROUND: The degree to which antithrombotic drugs suppress thrombin generation is unknown. Because hirudin, unlike antithrombin III, binds intravascular thrombin rapidly and selectively to yield a circulating inactive complex of 3- to 4-hour half-life, we used intravenous hirudin in humans to investigate the course of thrombin generation during and early after anticoagulation with this potent, direct antithrombin. METHODS AND RESULTS: Intravascular thrombin was measured with an ELISA for the thrombin-hirudin complex formed during and for 18 hours after stopping a 6-hour infusion of hirudin at 0.1, 0.2, and 0.3 mg.kg-1.h-1 in three groups of six patients each. With free hirudin in 20- to 10,000-fold molar excess of thrombin and peak activated partial thromboplastin times of 2.3 to 3.0 times baseline, mean plasma thrombin-hirudin complex increased from 794 +/- 85 pg/mL (mean +/- SEM) 15 minutes after the start of the infusion to 1617 +/- 151 pg/mL at 6 hours of infusion to 2667 +/- 654 pg/mL at 24 hours. During the 24-hour observation period, plasma concentration of fragment 1.2 (the peptide released during conversion of prothrombin to thrombin) never fell below baseline but rather increased transiently during the hirudin infusion. Plasma concentrations of thrombin-antithrombin III complex (in ng/mL) decreased from 4.34 +/- 0.40 at baseline to 1.64 +/- 0.13 at 6 hours (P < .001) and gradually increased after stopping the infusion to 5.7 +/- 0.87 at 24 hours (nonsignificant compared with baseline). CONCLUSIONS: Measurement of thrombin-hirudin complex may be used as a marker of thrombin generation in humans. Persistent accumulation of thrombin-hirudin complex and generation of fragment 1.2 during and after completion of potent anticoagulation with hirudin suggest thrombin generation is not blocked by high-affinity thrombin inhibition. The persistent formation of thrombin during declining plasma levels of hirudin may contribute to the pathogenesis of rethrombosis early after antithrombin therapy or during inadequate anticoagulation.     

Children's use of looking behavior as a cue to detect another's goal

Three studies examined children's understanding of the role that looking behavior plays in revealing another's desired goal. In each study, participants were asked which of 2 objects a protagonist wanted to obtain. Four-year-olds did not infer that an object examined via prolonged looking was more likely to be the protagonist's goal than an object that was either glanced at or inadvertently touched. Instead, they were accurate only when the protagonist looked at one of two potential goals. In contrast, the majority of 6-year-olds (and adults in Experiment 1) consistently regarded prolonged looking as the more important cue of the protagonist's goal. These age differences suggest that development is characterized by an increasing appreciation that goal is revealed by comparative differences in the quality of perceptual connectedness to objects in the world. One explanation for these age differences is that preschoolers are limited in their understanding of the difference between perceiving with full attention and without it.     

The removal of arsenic from （ground）-water by adsorbent loaded in polymeric microspheres

Arsenic is a natural tasteless and odourless element,existing in the earth’s crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, who are exposed to it primarily from air,food and water. The occurrence of arsenic in groundwater is due to geological composition of soil. High concentrations of arsenic in water are the result of dissolution or desorption of ferric oxides and the oxidation of mineral arsenopyrites. Arsenic in drinking water has an important impact on the human health,especially in the less developed countries. Different methods exist to remove arsenic from aquatic media,and one of them is by adsorption. In this work,the adsorption of both As(III) and As(V) by means of novel microspheres has been investigated. In particular,TiO2 has been embedded into polymeric microspheres PES (PolyEtherSulphone) and PEEK-WC (PolyEtherEther-Ketone) . The main advantages of this encapsulation adsorption material are: no loss of adsorbents into the water stream,easy to be used and scaled-up.     

Non-equilibrium particle motion in the vicinity of a single blade

The motion of sand particles close to a single moving blade was investigated using Positron Emission Particle Tracking (PEPT) during the period in which the free bed surface profile was evolving to an equilibrium shape. The area affected by the blade was divided into active and inactive regions and these were analysed separately. The characteristic heart-shape of the active region in the plan view was determined. An approximately 10-particle-diameter wide velocity transition zone is found between the two regions. While the tracer particle is in the inactive region moving away from the blade, the time dependence of the axial displacement is well described by a logarithmic relationship. The probability of particle movement towards the centre of the blade was quantified using a “central tendency” index. The calculated central tendency shows maxima at each side of the blade. The separation of the two maxima, which indicates the width of the active region, increases with fill level but is independent of rotational speed.     

Polyurethane‐infiltrated carbon foams: A coupling of thermal and mechanical properties

The thermal and mechanical properties of polyurethane‐infiltrated carbon foam of various densities were investigated. By combining the high thermal conductivity of the carbon foam with the mechanical toughness of the pure polyurethane, a mechanically tough composite (relative to the unfilled foam) that could be used at higher temperatures than the polyurethane's degradation was formed. Both the tensile strength and the modulus increased by an order of magnitude for the composites compared to unfilled foam, while the compressive and shear strengths and moduli of the composites approached values exhibited by pure polyurethane. At both 300 and 400°C, the rectangular blocks of pure polyurethane lost their mechanical integrity due to decomposition in air. Thermogravimetric analysis confirms substantial initial weight loss above 290°C. Filled carbon foam blocks, however, maintain their mechanical integrity at both 300 and 400°C indefinitely, although the bulk of the rectangular block mass is polyurethane. Three different carbon foam densities are examined. As expected, the higher density foams show greater heat transfer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2348–2355, 2003     

Semicontinuous separation of dimethyl ether (DME) produced from biomass

A ternary semicontinuous system for the separation of bio‐dimethyl ether from methanol and water is presented. The performance of eight potential control configurations, including the application of temperature inferential control, is evaluated. Dynamic simulations of the semicontinuous system and associated control scheme demonstrate that the temperature inferential control configuration is effective in achieving the separation objectives while remaining within operational limits. The semicontinuous system using the inferential temperature control scheme is simulated and shown to be economically preferable to the traditional continuous process for a range of production rates. © 2013 Canadian Society for Chemical Engineering     

Peel Analysis Using the Finite Element Method

Large displacement finite element analysis and subsequent experimental work has been used to investigate the adhesive peel test; at this stage, only elastic behaviour has been considered.

Both non-cracked and cracked configurations have been analysed, representing initial and continuous failure of the peel test. Analysis of the former indicated that initial failure was caused by the adhesive principal stresses driving a crack towards the interface with the flexible adherend. Investigation of the cracked configuration has shown that the amount of mode II loading at the crack tip is significant and is essentially independent of peel angle, load and adhesive or adherend modulus, only decreasing as the adhesive becomes incompressible. Failure (propagation) has been shown to occur at a critical applied bending moment for a particular adherend and adhesive, independent of peel angle. Further, the strength (load)'measured by the peel test is not proportional to the actual strength of the adhesive, a small increase in the adhesive strength causing a much larger increase in the applied peel load.     

A Method for the Stress Analysis of Lap Joints

A theory is presented for the adhesive stresses in single and double lap joints under tensile loading, while subjected to thermal stress. The formulation includes the effects of bending, shearing, stretching and hygrothermal deformation in both the adherend and adhesive. All boundary conditions, including shear stress free surfaces, are satisfied. The method is general and therefore applicable to a range of material properties and joint configurations including metal-to-metal, metal-to-CFRP or CFRP-to-CFRP. The solution is numerical and is based on an equilibrium finite element approach. Through the use of an iterative procedure, the solution has been extended to cater for non-linear adhesive materials.     

THEORETICAL ANALYSIS OF THE DIFFUSION PROCESS INSIDE PROLATE SPHEROIDAL SOLIDS

ABSTRACT

A numerical solution of the diffusion equation to describe solute transport inside ellipsoids, assuming a constant difiusion coefficient and a corrective boundary condition, is presented. The difiusion equation in a prolate spheroidal coordinate system was used for a hidimensional case. The finite volume method was employed to discretize the basic equation, utilizing a uniform grid size. The equation was solved irteratively using the Gauss-Seidel method. The effect of Biot number and the aspect ratio of the body on diffusion rate and concentration during the process is presented. Plots are presented for Biot numbers from 0.05 to infinity and aspect ratios of 1.1, 2.0 and 5.0. To investigate the effect of the aspect ratio, different results changing the aspect ratio for Bi= 1.0 are shown. The results show that the model is consistent and it may be used to solve other cases such as those that include cylinder and sphere geometry, and/ or those with variable diffusion coefficients with small modifications.