Electrochemical and morphological characterization of poly(12-pyrrol-1′-yl dodecanoic acid)

12-Pyrrol-1′-yl dodecanoic acid was prepared and electrochemically polymerized on ITO electrodes by three different methods. The electrochemical and morphological properties of poly(12-pyrrol-1′-yl dodecanoic acid) films were investigated by cyclic voltammetry, galvanostatic charge–discharge curves and AFM, which characteristics varied as function of deposition method. Films deposited by potentiodynamic and galvanostatic methods showed capacitive properties and are promising for application in polymeric capacitors.     

Volatile compounds as potential defective coffee beans’ markers

Although Brazil is the largest raw coffee producer and exporter in the world, a large amount of its Arabica coffee production is considered inappropriate for exportation. This by-product of coffee industry is called PVA due to the presence of black (P), green (V) and sour (A) defective beans, which are known to contribute considerably for cup quality decrease. Data on the volatile composition of Brazilian defective coffee beans are scarce. In this study, we evaluated the volatile composition of defective coffee beans (two lots) compared to good quality beans from the respective lots. Potential defective beans’ markers were identified. In the raw samples, 2-methylpyrazine and 2-furylmethanol acetate were identified only in black-immature beans and butyrolactone only in sour beans, while benzaldehyde and 2,3,5,6-tetramethylpyrazine showed to be potential markers of defective beans in general. In the roasted PVA beans, pyrazine, 2,3-butanediol meso, 2-methyl-5-(1-propenyl)pyrazine, hexanoic acid, 4-ethyl-guayacol and isopropyl p-cresol sulfide also showed to be potential defective coffee beans’ markers.     

Disinfection of Dental Instruments Contaminated with Streptococcus mutans Using Ozonated Water Alone or Combined with Ultrasound

Ozone gas diluted in water has been shown to produce significant results in terms of the elimination of microorganisms. Streptococcus mutans is the etiologic agent of dental caries. Methods using water containing ozone and an ultrasonic cleaner were employed for the disinfection of a curette. Streptococcus mutans was grown in a selective medium. The curette was submitted to disinfection by water containing ozone, by ultrasound, and then both techniques were combined. The results show that either method produced a significant microbial reduction, but the efficacy of both methods combined was greater. This method of disinfection proved to be both viable and cheap.     

Impact of Some Properties of Quaternized Polysulfone/Poly(Vinylidene Fluoride) Blend on the Potential Biomedical Applications

Blends of quaternized polysulfones with triphenylphosphonium pendant groups/poly(vinylidene fluoride) were analyzed to establish their impact on the rheological, morphological and surface properties, as well as their interactions with some blood compounds. The rheological functions reflect the influence of both polymers’ chemical structures. Blend compositions of the corresponding films influence the surface tension parameters, increase blend hydrophobicity and, implicitly, decrease the polar surface tension parameters. The specific surface characteristics of polymer blends are related to their interactions with some blood constituents and plasma proteins. Also, the specific microarchitecture of the blend represents an excellent scaffold for medical applications.     

Comparing different methods to fix and to dehydrate cells on alginate hydrogel scaffolds using scanning electron microscopy

Scanning electron microscopy (SEM) is commonly used in the analysis of scaffolds morphology, as well as cell attachment, morphology and spreading on to the scaffolds. However, so far a specific methodology to prepare the alginate hydrogel (AH) scaffolds for SEM analysis has not been evaluated. This study compared different methods to fix/dehydrate cells in AH scaffolds for SEM analysis. AH scaffolds were prepared and seeded with NIH/3T3 cell line; fixed with glutaraldehyde, osmium tetroxide, or the freeze drying method and analyzed by SEM. Results demonstrated that the freeze dried method interferes less with cell morphology and density, and preserves the scaffolds structure. The fixation with glutaraldehyde did not affect cells morphology and density; however, the scaffolds morphology was affected in some level. The fixation with osmium tetroxide interfered in the natural structure of cells and scaffold. In conclusion the freeze drying and glutaraldehyde are suitable methods for cell fixation in AH scaffold for SEM, although scaffolds structure seems to be affected by glutaraldehyde. Microsc. Res. Tech. 78:553–561, 2015. © 2015 Wiley Periodicals, Inc.     

设计工程：软性基础设施——以墨西哥城的Texcoco公园为例

在当代的新形势下,城市地区必须探索新的实践和工程模式。Texcoco生态公园是一个关于城市如何重新构想和协调土地和生态复杂性的案例。该项目位于墨西哥城的生态区内,它揭示和探究了传统的建筑学方法如何无法应对大都市区所面临的复杂问题。Texcoco生态公园意在成为世界上最大的城市公园,同时设法解决当下墨西哥峡谷所面临的水危机。认识到水作为主要的组织元素,该项目提出两大主要策略来解决最具挑战性的问题。这两大策略是：“平衡”和“多任务”。这个公园同时作为一个软性基础设施,一种更加复杂的结构,而不是单一功能的支持系统。最后,该项目提出为区域未来发展所需的四个系统：栖息地系统、社会发展项目系统、交通系统和能源系统。     

Levels of essential and toxic elements in Porphyra columbina and Ulva sp. from San Jorge Gulf, Patagonia Argentina

Baseline concentration levels of As, B, Ca, Cd, Cr, Cu, Co, Fe, Mg, Mn, Mo, Ni, P, Pb, Se, V, and Zn were determined for Porphyra columbina and Ulva sp. collected from three locations along San Jorge Gulf, in Patagonia Argentina. Elements were quantified by inductively coupled plasma-optical emission spectrometry, with the exception of lead and cadmium in some samples which were determined by electrothermal atomic absorption spectrometry. Three stations with different exposure degree to human activities, Bahía Solano, the mouth of Arroyo La Mata stream and Punta Maqueda, were selected as sampling points. The results showed a wide range of metal retention capacity between the two studied species. Regarding the levels of pollutants found in the researched sites, Punta Maqueda seemed to be less influenced by anthropogenic activities than the other two sites except for Cd. Taking into account their toxicities seasonal variations in Pb and Cd levels were studied in both algae in Punta Maqueda. Maximum concentrations of Cd (9.8 microg g(-1) dry wt.) were observed in P. columbina during winter, and maximum levels of Pb (0.82 microg g(-1) dry wt.) were detected in Ulva sp. during summer. Legislative and health safety aspects were evaluated for Cd and Pb.     

LYS2 gene and its mutation in Kluyveromyces lactis

The KlLYS2 gene, encoding the alpha-aminoadipate reductase of Kluyveromyces lactis, was isolated by complementation of a lysA1 mutant. The deduced amino acid sequence shared an identity of 73% with the LYS2 product of Saccharomyces cerevisiae. Despite the high sequence homology of the alpha-aminoadipate reductase genes, the two yeast species differently responded to the presence of alpha-aminoadipate in the medium. Wild-type S. cerevisiae is known to be sensitive to alpha-aminoadipate, but becomes resistant when mutated to lys2. In contrast, K. lactis strains were found to be naturally resistant to alpha-aminoadipate. Therefore, the positive selection procedure for the isolation of lys2 mutants on alpha-aminoadipate, as practised in S. cerevisiae, cannot be applied to K. lactis. A possible reason of this difference may be that the catalytic rate of the alpha-aminoadipate reductase differs in the two yeasts. The EMBL/Genbank Accession No. for the KlLYS2 gene is AJ504405.     

PUCK: an automated prompting system for smart environments: toward achieving automated prompting—challenges involved

The growth in popularity of smart environments has been quite steep in the last decade and so has the demand for smart health assistance systems. A smart home-based prompting system can enhance these technologies to deliver in-home interventions to users for timely reminders or brief instructions describing the way a task should be carried out for successful completion. This technology is in high demand given the desire of people who have physical or cognitive limitations to live independently in their homes. In this paper, with the introduction of the “PUCK” prompting system, we take an approach to automate prompting-based interventions without any predefined rule sets or user feedback. Unlike other approaches, we use simple off-the-shelf sensors and learn the timing for prompts based on real data that are collected with volunteer participants in our smart home test bed. The data mining approaches taken to solve this problem come with the challenge of an imbalanced class distribution that occurs naturally in the data. We propose a variant of an existing sampling technique, SMOTE, to deal with the class imbalance problem. To validate the approach, a comparative analysis with cost-sensitive learning is performed.