MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Mg-Li ALLOY WITH Ca ADDITION

Mg-9wt%Li-2wt%Zn alloy was prepared and studied in this article. The addition of Ca to the alloy from 0.1wt% to 1wt% can refine the α-Mg and the best effect of refinement occurs when Ca content is 0.4wt%-0.5wt%. The billets can be rolled to thin sheets at room temperature, from which it is obvious that the addition of Ca improves alloys ormalin. while it decreases with the excess addition of Ca. The results also show that the ultimate tensile strength （UTS） and yield strength （YS） of the alloy with lwt% Ca may rise by 28% and 25%, respectively, however, the elongation decreases. It is clarified that the adsorption of proper Ca on the grain boundaries refines α-Mg and improves the tensile properties, but the presence of excess Ca and stable Ca2Mg6Zn3phase worsens the elongation.     

Mn含量对Mg2Ni型合金相形成及放电性能的影响

采用按比例混合合金粉末压制成圆柱试样，然后用低温烧结和随后机械球磨的方法制备了非晶态的Mg2Ni型合金。研究了烧结和球磨对不同Mn含量的Mg2Ni型合金的相形成过程及电化学性能的影响。实验表明：在Mg2Ni中采用第三组元Mn对Mg进行适量的替代后，通过烧结及球磨方法可以获得均匀的非晶相；微量替代可有效地提高其放电容量：随替代量的增加，合金最大放电容量和高速放电能力降低，而充放电循环稳定性提高。     

稀土在渗硼及硼的复合渗中的作用

本文综述了近十几年来稀土在渗硼及硼的复合渗中的作用以及稀土对渗层组织性能的研究概况，并对其作用机理作了初步探讨。     

稀燃车用催化剂的研究进展

稀燃车用催化剂是汽车尾气净化催化剂今后发展的方向，在稀燃条件下如何处理NOx是稀燃车用催化剂面临的巨大挑战。本文详细地评述了近年来国内外在这方面的研究工作，包括选择催化还原催化剂、存储还原催化剂和组合多功能催化剂的研究进展。     

金属磁记忆检测技术概况及初步应用

介绍金属磁记忆检测技术的背景、发展、现状、目的和意义，用两个应用实例初步评价了磁记忆检测技术的有效性，提出了磁记忆技术发展的近期和远期目标，展望了应用前景。     

Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation

The ceramic coating formed on AZ91 magnesium alloy by micro-arc oxidation （MAO） was characterized. The results show that the ceramic coating （3.4-23 μm in thickness）on the surface ofAZ91 alloy was attained under different micro-arc oxidation treatment conditions, which consist mainly of MgO, Mg2SiO4 and MgSiO3 phases. Nano-hardness in a cross-sectional specimen was determined by nano-indentation experiment. The MAO coatings exhibit higher hardness than the substrate. Dry sliding wear tests for the MAO coatings and AZ91 alloy were also carded out using an oscillating friction and wear tester in a ball-on-disc contact configuration. The wear resistance of the MAO coatings is improved respectively under different treatment time as a result of different structures of ceramic coatings formed on AZ91 alloy.     

Numerically optimal design for the system with coupled complex transport phenomena-application to the Submerged Entry<Emphasis Type="Italic">Nozzle</Emphasis> in continuous slab caster

This study presents a simple and robust algorithm for the optimal design of the system with coupled complex transport phenomena: the transport phenomena comprise fluid flow, heat and mass transfer. The (1+1)-Evolution Strategy method is adopted as the optimization method. In order to analyze the transport phenomena in the complex geometry generated during the optimization procedure, thefinite volume method with a boundary fitted curvilinear coordinate system is used. To confirm the validity of the present method, the optimal design for the inner shape of the simplified two-dimensionalSubmerged Entry Nozzle in the continuous slab caster is conducted. It is shown that the resulting design of the nozzle is consistent with the purpose and constraints of the design.     

脱硫塔501-EA的焊接修复

脱硫分厂脱硫塔焊缝缺陷威胁生产，修复后有效消除了隐患，延长设备使用寿命，现系统运行良好。     

共烧陶瓷多层基板技术及其发展应用

论述了高温共烧陶瓷与低温共烧陶瓷的优缺点，并讨论了多层共烧陶瓷的材料选择、工艺过程与控制，然后在提高材料性能方面提出了一些建议和方法，同时介绍了多层共烧陶瓷的国内外研究状况及今后的发展趋势。     

流程生产的可视化整合和多目标优化软件

针对现代企业所面临的挑战，开发了一个软件系统可以根据市场的动态变化和企业内部的设备状况，优化设备配置、优化原料和产品方案。采用可视化形式实施仿真运行和经济效益分析预测。