The effect of montmorillonite and compatibilizer quantities on stiffness and toughness of polyamide nanoblends

Although polymer blend nanocomposites are widely studied, the balance between stiffness and toughness has not yet been investigated in detail. Some materials producers as well as some sectors in the automotive industry try to improve the toughness of materials without an important loss in stiffness. With this in mind, the aim of the study reported here was to obtain a good balance between toughness and stiffness of polymer blends with different amounts of clay and compatibilizer. In this context, the microstructure of polyamide 6/ethylene–propylene–diene metallocene terpolymer/(ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) blends with various amounts of clay (2, 3, 4 and 5 wt%) and compatibilizer (10 and 20 wt%) was studied to analyse the achieved morphology to understand the macroscopic properties. The morphology of the rubber phase and the dispersion of the montmorillonite (MMT) are the main factors that influence the mechanical properties. In this sense, the highest Young's modulus is achieved for nanoblends with 5 wt% of MMT, although this nanoblend has the lowest value of notched Izod impact strength. The results obtained suggest that there is a clear trade‐off between stiffness, toughness and temperature behaviour when the ratio of (ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) to MMT is 5:1. Copyright © 2009 Society of Chemical Industry     

Nanoporous Al‐Ni‐Co‐Ir‐Mo High‐Entropy Alloy for Record‐High Water Splitting Activity in Acidic Environments

Ir‐based binary and ternary alloys are effective catalysts for the electrochemical oxygen evolution reaction (OER) in acidic solutions. Nevertheless, decreasing the Ir content to less than 50 at% while maintaining or even enhancing the overall electrocatalytic activity and durability remains a grand challenge. Herein, by dealloying predesigned Al‐based precursor alloys, it is possible to controllably incorporate Ir with another four metal elements into one single nanostructured phase with merely ≈20 at% Ir. The obtained nanoporous quinary alloys, i.e., nanoporous high‐entropy alloys (np‐HEAs) provide infinite possibilities for tuning alloy's electronic properties and maximizing catalytic activities owing to the endless element combinations. Particularly, a record‐high OER activity is found for a quinary AlNiCoIrMo np‐HEA. Forming HEAs also greatly enhances the structural and catalytic durability regardless of the alloy compositions. With the advantages of low Ir loading and high activity, these np‐HEA catalysts are very promising and suitable for activity tailoring/maximization.     

Biosynthesis of lipids and organic acids by Yarrowia lipolytica strains cultivated on glucose

The biochemical behavior of wild‐type or genetically modified (presenting decreased expression of intracellular acyl‐CoA oxidases) Yarrowia lipolytica strains cultivated on commercial glucose was studied. Flask nitrogen‐limited cultures were performed favoring the production of organic acids (and potentially the accumulation of lipid). Nitrogen depletion induced secretion of citric acid, while intracellular lipid was not produced in high quantities. Maximum total citric acid up to 49 g/L (yield 0.85 g/g glucose) was produced. In some of the wild‐type strains, an increase of glucose in the medium also induced noticeable production of acetic acid. Increasing the amount of added glucose led to an increase in the total lipid quantity (%) produced, although in the stationary growth phase the concentration of lipid declined, indicating lipid degradation even for the genetically modified strains. Total lipid amount did not exceed the value of 14%, while neutral fractions increased with increase in glucose concentration. In all cases, the total microbial lipids and major lipid fractions were composed of C₁₆ and C₁₈ (principally unsaturated) fatty acids. Finally, in several of the strains cultured in media containing a low glucose concentration, unicellular morphology was observed, while at high glucose concentrations mycelia were predominant.     

Recovery of platinum, tin and indium from spent catalysts in chloride medium using strong basic anion exchange resins

This work describes a route for platinum recovery from spent commercial Pt and PtSnIn/Al₂O₃ catalysts using strong basic mesoporous and macroporous anion exchange resins (Cl⁻ form). The catalysts were leached with aqua regia (75 °C, 20-25 min). Platinum adsorption was influenced by the presence of other metals which form chlorocomplexes (tin, indium) and also base metals (aluminum). However, it was possible to overcome this fact by a sequential desorption procedure. Aluminum was selectively removed from the resins by elution with 3 mol L⁻¹ HCl. Platinum was desorbed passing 1 mol L⁻¹ Na₂S₂O₃ (pH 9). Tin was removed by elution with 0.1 mol L⁻¹ ascorbic acid. Indium was removed using 0.1 mol L⁻¹ EDTA as eluent. Desorption efficiency exceeded 99% for all metals. Metals were recovered in high yields (>98 wt%).     

Dielectric properties of SBR vulcanizates loaded with HAF carbon black and BaTiO3 ceramics

The influence of HAF carbon black and BaTiO₃ ceramic powder contents in SBR vulcanizates on the dielectric constant (ε′) at different frequencies and at fixed temperature of 303 K is studied well in this article. The temperature dependence of the ac conductivity (σ_ac) was also studied. ε′ appreciably decreases as frequency increased for both filled and unfilled SBR vulcanizates. At each frequency, ε′ gradually decreased with BaTiO₃ loading, but its change at any fixed frequency with BaTiO₃ filler loading is not uniform. For HAF group ε′ (at loading ≥ 40 phr), drops rapidly with frequency. Meanwhile, it increased appreciably beyond a certain HAF filler loading (≈ 20 phr). Experimental values of the dielectric constant of both BaTiO₃ and HAF contents were compared with those calculated by using Tsangaris, Clausius and Bruggman models. Tsangaris model with simple modifications was applied and a fairly good agreement was obtained. The HAF particles or aggregates was found to take the shape of oblate ellipsoids with the minor axes parallel to the applied frequency as detected from the decreasing behavior of the depolarizing factor (Y) with HAF contents. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2227–2234, 2007     

New control charts for monitoring the Weibull percentiles under complete data and Type‐II censoring

In this paper, we propose 3 new control charts for monitoring the lower Weibull percentiles under complete data and Type‐II censoring. In transforming the Weibull distribution to the smallest extreme value distribution, Pascaul et al (2017) presented an exponentially weighted moving average (EWMA) control chart, hereafter referred to as EWMA‐SEV‐Q, based on a pivotal quantity conditioned on ancillary statistics. We extended their concept to construct a cumulative sum (CUSUM) control chart denoted by CUSUM‐SEV‐Q. We provide more insights of the statistical properties of the monitoring statistic. Additionally, in transforming a Weibull distribution to a standard normal distribution, we propose EWMA and CUSUM control charts, denoted as EWMA‐YP and CUSUM‐YP, respectively, based on a pivotal quantity for monitoring the Weibull percentiles with complete data. With complete data, the EWMA‐YP and CUSUM‐YP control charts perform better than the EWMA‐SEV‐Q and CUSUM‐SEV‐Q control charts in terms of average run length. In Type‐II censoring, the EWMA‐SEV‐Q chart is slightly better than the CUSUM‐SEV‐Q chart in terms of average run length. Two numerical examples are used to illustrate the applications of the proposed control charts.     

Prediction of fiber orientation distribution in injection molded parts using Moldex3D simulation

In the automotive industry, glass‐filled thermoplastics are used in air intake manifolds, radiator tanks, and many other parts. However, widespread application of glass‐filled thermoplastic materials has been limited in many cases by the inability to accurately predict performance and durability. Since a more accurate fiber orientation prediction will lead to more accurate local mechanical property predictions, this work investigated a recently proposed mathematic model of fiber suspension rheology, which considers the anisotropic fiber diffusion and fiber–matrix interaction from a microscopic viewpoint. The new model proved able to predict many details of the fiber orientation distribution and could be applied advantageously as part of the product and manufacturing development processes. POLYM. COMPOS., 35:671–680, 2014. © 2013 Society of Plastics Engineers     

Conductive Recyclable Organogel Composites

As the use of automation in industry accelerates, the development of flexible, electrically conducting materials with the requisite environmental resilience for impact‐resistant sensors, foldable electronics, and electrostatic shielding are needed; simultaneously, recyclability for these materials remains a crucial attribute. Traditional conductive stretchable materials, such as rubbers, are not recyclable, and hydrogel materials have limited applications due to water evaporation and operating temperature range. Comparatively, organogels can be formulated with enhanced tunability, matrix recyclability, and the ability to support many conductive fillers. Here, rheology, mechanical testing, and electrochemical impedance spectroscopy (EIS) characterize the nanoscale interactions between carbon fillers, the liquid phase, and the network matrix in hemiaminal dynamic covalent network (HDCN) organogels. HDCN chemical equilibria are shown to strongly influence macroscopic gel properties, while HDCN composites exhibit very high conductivities up to 9.95 mS cm^?1 appropriate for sensing applications, demonstrating promise as recyclable alternatives for conductive stretchable materials.