Surface modification of polyamide and poly(vinylidene fluoride) membranes

Experimental results from the gas‐plasma treatment and electron‐beam irradiation of polyamide (PA) and poly(vinylidene fluoride) (PVDF) membranes to improve their wettability and to evaluate protein adsorption at their surface are presented. The wettability of the membrane surface was determined by contact angle measurements; the analysis of the surface composition was performed by X‐ray photoelectron spectroscopy (XPS). We observed that a reduction in the water contact angle was not always indicative of a reduction in the protein adsorption and, furthermore, that a charge at the surface of the modified membrane seemed to be a major factor in the protein adsorption process. Furthermore, the XPS results shed some light on the modification mechanism of PVDF and PA by electron‐beam irradiation. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

12‐crown‐4–ether and tri(ethylene glycol) dimethyl–ether plasma‐coated stainless steel surfaces and their ability to reduce bacterial biofilm deposition

It has been demonstrated that surfaces coated with poly(ethylene glycol) (PEG) are capable of reducing protein adsorption, bacterial attachment, and biofilm formation. In this communication cold‐plasma–enhanced processes were employed for the deposition of PEG‐like structures onto stainless steel surfaces. Stainless steel samples were coated under 1,4,7,10‐tetraoxacyclododecane (12‐crown‐4)–ether and tri(ethylene glycol) dimethyl ether (triglyme)–radio frequency (RF)–plasma conditions. The chemistry and characteristics of plasma‐coated samples and biofilms were investigated using electron spectroscopy for chemical analysis (ESCA), atomic force microscopy (AFM), and water contact angle analysis. ESCA analysis indicated that the plasma modification resulted in the deposition of PEG‐like structures, built up mainly of –CH₂? CH₂? O– linkages. Plasma‐coated stainless steel surfaces were more hydrophilic and had lower surface roughness values compared to those of unmodified substrates. Compared to the unmodified surfaces, they not only significantly reduced bacterial attachment and biofilm formation in the presence of a mixed culture of Salmonella typhimurium, Staphylococcus epidermidis, and Pseudomonas fluorescens but also influenced the chemical characteristics of the biofilm. Thus, plasma deposition of PEG‐like structures will be of use to the food‐processing and medical industries searching for new technologies to reduce bacterial contamination. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3425–3438, 2001     

Efficacy of home washing methods in controlling surface microbial contamination on fresh produce

Much effort has been focused on sanitation of fresh produce at the commercial level; however, few options are available to the consumer. The purpose of this study was to determine the efficacy of different cleaning methods in reducing bacterial contamination on fresh produce in a home setting. Lettuce, broccoli, apples, and tomatoes were inoculated with Listeria innocua and then subjected to combinations of the following cleaning procedures: (i) soak for 2 min in tap water, Veggie Wash solution, 5% vinegar solution, or 13% lemon solution and (ii) rinse under running tap water, rinse and rub under running tap water, brush under running tap water, or wipe with wet/dry paper towel. Presoaking in water before rinsing significantly reduced bacteria in apples, tomatoes, and lettuce, but not in broccoli. Wiping apples and tomatoes with wet or dry paper towel showed lower bacterial reductions compared with soaking and rinsing procedures. Blossom ends of apples were more contaminated than the surface after soaking and rinsing; similar results were observed between flower section and stem of broccoli. Reductions of L. innocua in both tomatoes and apples (2.01 to 2.89 log CFU/g) were more than in lettuce and broccoli (1.41 to 1.88 log CFU/g) when subjected to same washing procedures. Reductions of surface contamination of lettuce after soaking in lemon or vinegar solutions were not significantly different (P > 0.05) from lettuce soaking in cold tap water. Therefore, educators and extension workers might consider it appropriate to instruct consumers to rub or brush fresh produce under cold running tap water before consumption.     

Layer disorder in carbon anodes

Inter- and intra-layer disorder in a representative hard carbon derived from epoxy novolac resin at 1000°C have been investigated by comparing both the elastic structure factor S(Q) and radial distribution function obtained from pulsed neutron time-of-flight measurements with calculations from simple hypothetic systems with specific disorder characteristics. The spatial relationship between these building blocks, planar graphene fragments with length scale of 1 nm, is probed in terms of inter-layer alignment and intra-layer connectivity. Coupled with the density of dangling bonds obtained from ESR and residual hydrogen concentration, these simulations provide sufficient information to construct an overall model of the carbon structure. Of special interest is the physical origin of the ubiquitous broad (002)-like reflection frequently interpreted as that from layers with a uniform interlay spacing (d₀₀₂) It is found to be directly related to the misalignment between layers with an average interlayer spacing as that in crystalline graphite (3.35 Å).     

Synthesis and Biological Evaluation of Fluorescent Bryostatin Analogues

To investigate the cellular distribution of tumor‐promoting vs. non‐tumor‐promoting bryostatin analogues, we synthesized fluorescently labeled variants of two bryostatin derivatives that have previously shown either phorbol ester‐like or bryostatin‐like biological activity in U937 leukemia cells. These new fluorescent analogues both displayed high affinity for protein kinase C (PKC) binding and retained the basic properties of the parent unlabeled compounds in U937 assays. The fluorescent compounds showed similar patterns of intracellular distribution in cells, however; this argues against an existing hypothesis that various patterns of intracellular distribution are responsible for differences in biological activity. Upon further characterization, the fluorescent compounds revealed a slow rate of cellular uptake; correspondingly, they showed reduced activity for cellular responses that were only transient upon treatment with phorbol ester or bryostatin 1.     

The use of nickel oxide as a hole transport material in perovskite solar cell configuration: Achieving a high performance and stable device

Solar cells incorporated with organic-inorganic lead or tin halide-based perovskite materials as active light-absorber surfaces are referred to as perovskite solar cells (PSCs). This fast advancing solar technology has recorded an increase in its efficiency from 3.8% in 2009 to above 25% in recent years. The technology creates room for diverse device architectures, which enhances further development of thin-film solar cells and photovoltaics. This article reviews the use of nanocrystalline nickel oxide (NiO) film as a hole transport material in PSCs. The literature on pure nickel oxide and doped nickel oxide films has been discussed. The principle of operation, charge separation of PSCs and the various parameters that affect the efficient hole transport mechanisms, power conversion efficiency, growth mechanism, and stability of PSCs have also been discussed. Possible electron-blocking applications and future perspective of nickel oxide films have also been discussed.