Half-terahertz operation of SiGe HBTs

This letter presents the first demonstration of a silicon-germanium heterojunction bipolar transistor (SiGe HBT) capable of operation above the one-half terahertz (500 GHz) frequency. An extracted peak unity gain cutoff frequency (f/sub T/) of 510 GHz at 4.5 K was measured for a 0.12/spl times/1.0 /spl mu/m/sup 2/ SiGe HBT (352 GHz at 300 K) at a breakdown voltage BV/sub CEO/ of 1.36 V (1.47 V at 300 K), yielding an f/sub T//spl times/BV/sub CEO/ product of 693.6 GHz-V at 4.5 K (517.4 GHz-V at 300 K).     

Biogenic phosphorus in oligotrophic mountain lake sediments: differences in composition measured with NMR spectroscopy

Phosphorus (P) composition in alkaline sediment extracts from three Swedish oligotrophic mountain lakes was investigated using ³¹P-NMR spectroscopy. Surface sediments from one natural lake and two mature reservoirs, one of which has received nutrient additions over the last 3 years, were compared with respect to biogenic P composition. The results show significant differences in the occurrence of labile and biogenic P species in the sediments of the different systems. The P compound groups that varied most between these three systems were pyrophosphate and polyphosphates, compound groups known to play an important role in sediment P recycling. The content of these compound groups was lowest in the reservoirs and may indicate a coupling between anthropogenic disturbances (i.e., impoundment) to a water system and the availability of labile P species in the sediment. A statistical study was also conducted to determine the accuracy and reliability of using ³¹P-NMR spectroscopy for quantification of sediment P forms.     

Corrosion–microstructure interrelations in new low-lead and lead-free brass alloys

ABSTRACT

Stress-relieving heat treatment has been reported to deplete the corrosion resistance of new low-lead and lead-free brass alloys. How the heat treatment, processing and material composition relates to the microstructure and corrosion performance is not well understood. The present study aims to fill this knowledge gap by mapping stress-relieving annealing conditions and different standardised compositions to their respective microstructures and dezincification performance. It was found that loss of corrosion resistance was only the most severe for alloys with higher aluminium and iron content. These alloys displayed significant precipitation of intermetallic aluminium arsenide particles on grain boundaries, twins and lead particles, as well as the formation of β-phase along grain boundaries.

This paper is part of a Thematic Issue on Copper and its Alloys.     

Evacuation experiments in a virtual reality high‐rise building: exit choice and waiting time for evacuation elevators

The egress strategy in high‐rise buildings has traditionally been based on the sole use of stairs for evacuation. However, it is becoming more common to include evacuation elevators in the egress strategy in high‐rise buildings. Traditionally, evacuation elevators have not been allowed as an evacuation route, and people have been instructed to not use elevators in case of fire. This means that people might still not consider evacuation elevators even if they are designed to be safe in case of fire. Even if people choose evacuation elevators, they might not be willing to wait very long for an elevator to arrive. Virtual reality (VR) experiments were conducted to study exit choice and the waiting time for evacuation elevators in high‐rise buildings. The experiment was performed in a VR lab with a VR model of an existing high‐rise building. Results suggest that a simple way‐finding system using green flashing lights can influence people to more likely choose the elevator as their first evacuation choice. The results also show that the general trend is that people wait for either a limited time (<5 min) or a long time (>20 min). Copyright © 2015 John Wiley & Sons, Ltd.     

Evaluation of different oxygen carriers for biomass tar reforming (I): Carbon deposition in experiments with toluene

In this work, an innovative method for gas conditioning in biomass gasification is analyzed. The objective is to remove tar by selectively reforming the unwanted hydrocarbons in the product gas with a chemical looping reformer (CLR), while minimizing the carbon formation during the process. Toluene, in a concentration of 600-2000 ppmv, was chosen as a tar model compound. Experiments were performed in a TGA apparatus and a fixed bed reactor. Four oxygen carriers (60% NiO/MgAl₂O₄ (Ni60), 40% NiO/NiAl₂O₄ (Ni40), 40% Mn₃O₄/Mg-ZrO₂ (Mn40) and FeTiO₃ (Fe)) were tested under alternating reducing/oxidizing cycles. Several variables affecting the reducing cycle were analyzed: temperature, time for the reduction step and H₂O/C₇H₈ molar ratio. Ni40 and Mn40 presented interesting characteristics for CLR of biomass tar. Both showed stable reactivity to C₇H₈ after a few cycles. Ni40 showed a high tendency to carbon deposition compared to Mn40, specially at high temperatures. Carbon deposition could be controlled by decreasing the temperature and the time for the reduction step. The addition of water also reduced the amount of carbon deposited, which was completely avoided working with a H₂O/C₇H₈ molar ratio of 26.4.     

Combined heat and power in the Swedish district heating sector—impact of green certificates and CO2 trading on new investments

Combined heat and power (CHP) has been identified by the EU administration as an important means of reducing CO₂-emissions and increasing the energy efficiency. In Sweden, only about one third of the demand for district heat (DH) is supplied from CHP. This share could be significantly larger if the profitability of CHP generation increased. The objective of this study was to analyse the extent to which the profitability for investments in new CHP plants in the Swedish DH sector have changed thanks to the recently implemented trading schemes for green certificates (TGCs) and CO₂ emissions (TEPs). The analysis was carried out using a simulation model of the Swedish DH sector in which the profitability of CHP investments for all DH systems, with and without the two trading schemes applied, is compared. In addition, a comparison was made of the changes in CHP generation, CO₂ emissions, and operation costs if investments are made in the CHP plant shown to be most profitable in each system according to the model. The study shows that the profitability of investments in CHP plants increased significantly with the introductions of TGC and TEP schemes. If all DH utilities also undertook their most profitable CHP investments, the results indicate a major increase in power generation which, in turn, would reduce the CO₂ emissions from the European power sector by up to 13 Mton/year, assuming that coal condensing power is displaced.     

Short-term impact of green certificates and CO2 emissions trading in the Swedish district heating sector

Swedish district-heating (DH) systems use a wide range of energy sources and technologies for heat-and-power generation. This provides the DH utilities with major flexibility in changing their fuel and technology mix when the economic conditions for generation change. Two recently introduced policy instruments have changed the DH utilities’ costs for generation considerably; the tradable green-certificate (TGC) scheme introduced in 2003 in Sweden, and the tradable greenhouse-gas emission permit (TEP) scheme introduced in the EU on January 1, 2005. The objective of this study is to analyse how these two trading schemes impact on the operation of the Swedish DH sector in terms of changes in CHP generation, CO₂ emissions, and operating costs. The analysis was carried out by comparing the most cost-effective operation for the DH utilities, with and without, the two trading schemes applied, using a model that handles the Swedish DH-sector system-by-system. It was found that the volume of renewable power generated in CHP plants only increased slightly owing to the TGC scheme. The TGC and the TEP schemes in force together, however, nearly doubled the renewable power-generation. CO₂ emissions from the DH sector may either increase or decrease depending on the combination of TGC and TEP prices. The overall CO₂ emissions from the European power-generation sector would, however, be reduced for all price combinations assuming that increased Swedish CHP generation replaces coal-condensing power (coal-fired plants with power generation only) in other European countries. The trading schemes also lower the operational costs of the DH sector since the cost increase owing to the use of more expensive fuels and the purchase of TEPs is outweighed by the increased revenues from sales of electricity and TGCs.     

Low-temperature aerosol flow reactor method for preparation of surface stabilized pharmaceutical nanocarriers

Nanoparticles can be used to improve the delivery of many drugs, especially peptides and proteins. Although several methods are available for polymeric nanoparticle preparation, there are few single-stage processes that produce dry, solid nanoparticles that can be easily re-dispersed in pharmaceutical vehicles. The aerosol flow reactor method is a single-stage process that has been used for the preparation of multicomponent, coated nanoparticles under uniform temperature and gas flow field. However, it is traditionally used with high synthesis temperatures. In the present study, the aerosol flow reactor method was further optimized for processing and surface stabilization of pharmaceutical nanoparticles containing temperature sensitive biomolecules. In the developed method, drug-loaded carrier nanoparticles consisting of a biodegradable polymer (Eudragit L100) and a drug (phenylephrine hydrochloride) were first produced by aerosol droplet drying and subsequently coated in the gas phase. The carrier particles were coated with l-leucine in order to inhibit agglomeration of the nanoparticles in solutions before administration. In the coating process, a side stream of l-leucine vapor was directed into the main aerosol flow containing the drug-loaded carriers. The mixing with the main flow at ambient temperature induced a supersaturation of l-leucine vapor and condensation on the carrier particles. The results demonstrate that solid, hydrodynamically stable drug-loaded polymeric nanoparticles can be produced with a thin l-leucine coating. The low process temperature enables the surface engineering of particles loaded with temperature sensitive drugs or bioactive materials to be utilized for drug delivery purposes.     

Purification,Stereoisomeric Analysis and Quantification of Sex Pheromone Precursors in Female Whole Body Extracts from Pine Sawfly Species

A GC-MS method to analyze the stereoisomeric composition of chiral secondary alcohols found in whole body extracts of pine sawfly females was developed. The tested alcohols were derivatized with optically pure (S)-2-acetoxypropionyl chloride prior to GC-MS analysis. Baseline separation was obtained for all sixteen stereoisomers of 3,7,9-trimethyltridecan-2-ol and for the four 3-methylpentadecan-2-ol stereoisomers. For 3,7-dimethyltridecan-2-ol, 3,7-dimethyltetradecan-2-ol and 3,7-dimethylpentadecan-2-ol baseline separation was obtained for 6 of the possible 8 stereoisomers. When a mixture of 16 stereoisomers of 3,7,11-trimethyltridecan-2-ol was tested, baseline separation of 7 peaks out of 16 possible was obtained. The investigated alcohols are pheromone precursors for some pine sawfly species that are severe defoliators of pine. Females from several Diprion, Neodiprion, Macrodiprion, Microdiprion, and Gilpinia species emit esters of such secondary alcohols as sex pheromones that attract males for mating. To quantify the small amounts of the precursor alcohol and its stereoisomeric composition found in whole body extracts from female pine sawflies, a purification method was optimized. An extract of 20 females of D. pini contained about 8 ng of (2S,3R,7R)-3,7-dimethyltridecan-2-ol per female, and three extracts of 18, 20, and 90 females of N. sertifer contained between 5 and 13 ng of (2S,3S,7S)-3,7-dimethylpentadecan-2-ol per female.