A routing algorithm for reducing optical loss in photonic Networks-on-Chip

Driven by increase in automation, smart homes play an important role in today’s human life. This paper presents a new model for smart home technologies based on multi-device bidirectional visible light communication (VLC). For multiple devices and users, orthogonal code-based wavelength division (color beams) full-duplexed bidirectional VLC link is proposed. The color beams from RGB LEDs are utilized to transmit data and synchronize multi-device transmission. To enhance the performance of the proposed model, receiver diversity is also employed. Performance evaluation reveals that the proposed VLC-based model for smart homes is efficient with superior BER performance in a typical smart home environment except for the far corners. The maximum achievable data rate for each user up to four users is found to be 24 Mbps at both uplink and downlink transmissions.     

Industrie 4.0 Readiness: Green Computing in Relation with Key Performance Indicator for a Manufacturing Industry

Mobile Networks and Applications - An effective measure of Key Performance Indicators (KPIs) is of great significance to enhance the capabilities of a decision support system (DSS) of any...     

New Feedback Architecture for VCO-Based Delta-Sigma ADCs Utilizing Phase Shifter

The voltage controlled oscillator-based （VCO-based） continuous-time delta-sigma （CTDS） analog to digital converter （ADC） suffers from nonlinearity and mismatch in its feedback network. A new feedback network consisting of a phase shifter is proposed. The phase shifter replaces the digital to analog converter （DAC） in the proposed architecture. Feasibility of the proposed idea is discussed and its higher performance is illustrated through a behavioral simulation approach （CppSim）. We have also developed the phase shifter as a variable all-pass filter in the C language. The nonlinearity and mismatch of the system caused by DAC is mitigated, resulting in higher signal to noise ratio （SNR） and signal to noise and distortion ratio （SNDR）, respectively.     

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin-Film Solar Cell

Exhibiting outstanding optoelectronic properties, antimony selenide (Sb₂Se₃) has attracted considerable interest and has been developed as a light absorber layer for thin-film solar cells over the decade. However, current state-of-the-art Sb₂Se₃ devices suffer from unsatisfactory “cliff-like” band alignment and severe interface recombination loss, which deteriorates device performance. In this study, the heterojunction interface of an Sb₂Se₃ solar cell is improved by introducing effective aluminum (Al³⁺) cation into the CdS buffer layer. Then, the energy band alignment of Sb₂Se₃/CdS:Al heterojunction is modified from a “cliff-like” structure to a “spike-like” structure. Finally, heterojunction interface engineering suppresses recombination losses and strengthens carrier transport, resulting in a high efficiency of 8.41% for the substrate-structured Sb₂Se₃ solar cell. This study proposes a facile strategy for interfacial treatment and elucidates the related carrier transport enhancement mechanism, paving a bright avenue to overcome the efficiency bottleneck of Sb₂Se₃ thin-film solar cells.     

Optimized intrusion detection mechanism using soft computing techniques

Intrusion detection is an important technique in computer and network security. A variety of intrusion detection approaches be present to resolve this severe issue but the main problem is performance. It is important to increase the detection rates and reduce false alarm rates in the area of intrusion detection. Therefore, in this research, an optimized intrusion detection mechanism using soft computing techniques is proposed to overcome performance issues. The KDD-cup dataset is used that is a benchmark for evaluating the security detection mechanisms. The Principal Component Analysis (PCA) is applied to transform the input samples into a new feature space. The selecting of an appropriate number of principal components is a critical problem. So, Genetic Algorithm (GA) is used in the optimum selection of principal components instead of using traditional method. The Support Vector Machine (SVM) is used for classification purpose. The performance of this approach is addresses. Further, a comparative analysis is made with existing approaches. Consequently, this method provides optimal intrusion detection mechanism which is capable to minimize amount of features and maximize the detection rates.     

New radix-(2/spl times/2/spl times/2)/(4/spl times/4/spl times/4) and radix-(2/spl times/2/spl times/2)/(8/spl times/8/spl times/8) DIF FFT algorithms for 3-D DFT

In this paper, new three-dimensional (3-D) radix-(2/spl times/2/spl times/2)/(4/spl times/4/spl times/4) and radix-(2/spl times/2/spl times/2)/(8/spl times/8/spl times/8) decimation-in-frequency (DIF) fast Fourier transform (FFT) algorithms are developed and their implementation schemes discussed. The algorithms are developed by introducing the radix-2/4 and radix-2/8 approaches in the computation of the 3-D DFT using the Kronecker product and appropriate index mappings. The butterflies of the proposed algorithms are characterized by simple closed-form expressions facilitating easy software or hardware implementations of the algorithms. Comparisons between the proposed algorithms and the existing 3-D radix-(2/spl times/2/spl times/2) FFT algorithm are carried out showing that significant savings in terms of the number of arithmetic operations, data transfers, and twiddle factor evaluations or accesses to the lookup table can be achieved using the radix-(2/spl times/2/spl times/2)/(4/spl times/4/spl times/4) DIF FFT algorithm over the radix-(2/spl times/2/spl times/2) FFT algorithm. It is also established that further savings can be achieved by using the radix-(2/spl times/2/spl times/2)/(8/spl times/8/spl times/8) DIF FFT algorithm.     

A design and implementation of fully programmable switched-currentIIR filters

An approach to switched-current filter design based on digital multiply-accumulator and delay blocks is presented. The characteristics of the filter are made fully programmable by simply changing the ratios of the coefficient transistors. To reduce the effect of switch charge injection and channel-length modulation, a high-performance, single-ended differential, switched-current memory cell is developed and used as a basic building block. To reduce the chip area and to maintain the required accuracy of the coefficients, an array consisting of three different sizes of transistors is designed instead of using a unit transistor array as coefficient transistors. An experimental prototype infinite impulse response filter array consisting of six second-order switched-current sections is designed and fabricated with a standard 1.2-μ CMOS process technology. A hard-wiring technique is used to program the filters. The test results show that the characteristics of the filters satisfy the design requirements     

A reliable energy-efficient pressure-based routing protocol for underwater wireless sensor network

Recently, Underwater Wireless Sensor Networks (UWSNs) has witnessed significant attention from both academia and industries in research and development, due to the growing number of applications for wide range of purposes including commercial, scientific, environmental and military. Some of the major applications include pollution monitoring, tactical surveillance, tsunami warnings and offshore exploration. Efficient communication among sensors in UWSNs is a challenging task due to the harsh environments and peculiar characteristics of UWSNs. Therefore, design of routing protocol for efficient communication among sensors and sink is one of the fundamental research themes in UWSNs. In this context, this paper proposes a location-free Reliable and Energy efficient Pressure-Based Routing (RE-PBR) protocol for UWSNs. RE-PBR considers three parameters including link quality, depth and residual energy for balancing energy consumption and reliable data delivery. Specifically, link quality is estimated using triangle metric method. A light weight information acquisition algorithm is developed for efficient knowledge discovery of the network. Multi-metric data forwarding algorithm is designed based on route cost calculation which utilizes residual energy and link quality. Simulations are carried out in NS-2 with Aqua-Sim package to evaluate the performance of RE-PBR. The performance of the proposed protocol is compared with the stat-of-the-art techniques: DBR and EEDBR. The comprehensive performance evaluation attests the benefit of RE-PBR as compared to the state-of-the-art techniques in terms of network lifetime, energy consumption, end-to-end delay and packet delivery ratio.     

Fabrication of a <Emphasis Type="Italic">p</Emphasis>–<Emphasis Type="Italic">n</Emphasis> Heterojunction Using Topological Insulator Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>–Si and Its Annealing Response

A junction device has been fabricated by growing p-type Bi₂Te₃ topological insulator (TI) film on an n-type silicon (Si) substrate using a thermal evaporation technique. Annealing using different temperatures and durations was employed to improve the quality of the film, as confirmed by microstructural study using x-ray diffraction (XRD) analysis and atomic force microscopy (AFM). The p–n diode characteristics of the junction devices were studied, and the effect of annealing investigated. An improved diode characteristic with good rectification ratio (RR) was observed for devices annealed for longer duration. Reduction in the leakage or reverse saturation current (\( I_{\rm{R}} \)) was observed with increase in the annealing temperature. The forward-bias current (\( I_{\rm{F}} \)) dropped in devices annealed above 400°C. The best results were observed for the sample device annealed at 450°C for 3 h, showing figure of merit (FOM) of 0.621 with RR ≈ 504 and \( I_{\rm{R}} \) = 0.25 μA. In terms of ideality factor, the sample device annealed at 550°C for 2 h was found to be the best with \( n \) = 6.5, RR ≈ 52.4, \( I_{\rm{R}} \) = 0.61 μA, and FOM = 0.358. The majority-carrier density \( \left( {N_{\rm{A}} } \right) \) in the p-Bi₂Te₃ film of the heterojunction was found to be on the order of 10⁹/cm³ to 10¹¹/cm³, quite close to its intrinsic carrier concentration. These results are significant for fundamental understanding of device applications of TI materials as well as future applications in solar cells.