Structural and optical properties of Co-doped ZnS nanoparticles synthesized by a capping agent

Cobalt-doped Zinc sulfide (ZnS) nanoparticles were prepared by a simple chemical method using alkyl hydroxyl ethyl dimethyl ammonium chloride (YH) as capping agent. The structural and optical properties of prepared cobalt-doped ZnS nanoparticles have been characterized. X-ray diffraction patterns and transmission electron microscope images reveal pure cubic ZnS phase with size of about 5–2 nm for all cobalt-doped ZnS nanoparticles. The lattice constant of the samples decreases slightly by the introduction of Co²⁺ The absorption edge of the ZnS:Co²⁺ nanoparticles is blue-shifted as compared with that of bulk ZnS, indicating the quantum confinement effect. The photoluminescence emission band exhibits a blue shift for Co-doped ZnS nanoparticles as compared to the ZnS nanoparticles.     

Giant dielectric properties of nanocrystalline Pb1−xSnxF2 solid solutions

Nanocrystalline Pb_1?xSn_xF₂ (x = 0.2, 0.3) solid solutions have been synthesized by mechanochemical milling at room temperature with grain size as small as 26 nm. These fluoride ion conducting materials exhibit giant values of the dielectric constant of ?′ > 10⁵ that is independent of temperature and frequency over wide ranges. The giant values of ?′ are suggested to be due to internal effects in the materials. The dielectric response has been analyzed by appropriate equivalent circuit representing the grain and internal effects in the materials. Interestingly, the dielectric constant of the current samples is found to be larger for the samples with smaller grain size, a behavior that is quite opposite to what usually observed in giant dielectric oxide materials, where ?′ is enhanced with substantial growth of the grain size. The possible origin of the giant dielectric constant is discussed in the present study.     

In vitro characterization of a novel tissue engineered based hybridized nano and micro structured collagen implant and its in vivo role on tenoinduction,tenoconduction, tenogenesis and tenointegration

Surgical reconstruction of large tendon defects is technically demanding. Tissue engineering is a new option. We produced a novel tissue engineered, collagen based, bioimplant and in vitro characterizations of the implant were investigated. In addition, we investigated role of the collagen implant on the healing of a large tendon defect model in rabbits. A two cm length of the left rabbit’s Achilles tendon was transected and discarded. The injured tendons of all the rabbits were repaired by Kessler pattern to create and maintain a 2 cm tendon gap. The collagen implant was inserted in the tendon defect of the treatment group (n = 30). The defect area was left intact in the control group (n = 30). The animals were euthanized at 60 days post injury (DPI) and the macro- micro- and nano- morphologies and the biomechanical characteristics of the tendon samples were studied. Differences of P < 0.05 were considered significant. The host graft interaction was followed at various stages of tendon healing, using pilot animals. At 60 DPI, a significant increase in number, diameter and density of the collagen fibrils, number and maturity of tenoblasts and tenocytes, alignment of the collagen fibrils and maturity of the elastic fibers were seen in the treated tendons when compared to the control ones (P < 0.05). Compared to the control lesions, number of inflammatory cells, amount of peritendinous adhesions and muscle fibrosis and atrophy, were significantly lower in the treated lesions (P < 0.05). Treatment also significantly increased load to failure, tensile strength and elastic modulus of the samples as compared with the control ones. The collagen implant properly incorporated with the healing tissue and was replaced by the new tendinous structure which was superior both ultra-structurally and physically than the loose areolar connective tissue regenerated in the control lesions. The results of this study may be valuable in the clinical practice.     

Magneto-resistance and Excess Conductivity Studies of Tl(Ba2−y Mg y )Ca 2 Cu 3 O 10−δ Samples

The flux pinning characteristics of T l(B a _2?y M g _y )C a ₂ C u ₃ O _10?δ(0.0≤y≤ 1.5) samples have been studied under the influence of various dc magnetic fields in the light of thermally activated flux flow model. It was observed form the magneto resistivity measurements that the activation energy U has been increased in the sample with Mg incorporation of y=0.5, however, it is decreased in the samples with higher Mg doping. This shows that lower Mg doping concentration promotes enhancement, whereas its higher concentration suppresses the flux pinning characteristics of Tl(Ba _2?yMg _y )Ca ₂Cu ₃ O _10?δ (0.0 ≤y≤1.5) samples. The excess conductivity analysis of Tl(Ba _2?yMg _y )Ca ₂Cu ₃ O _10?δ (0.0 ≤ y ≤ 1.5) samples has shown that the coherence length along the c-axis ξ _c(0), the interlayer coupling J, the phase relaxation time of the carriers τ _? , and the Fermi velocity v _F of the carriers are suppressed with Mg doping. However, the values of B _c0(T), B _c1(T), and J _c(0) are enhanced which complement the magnetoresistivity analysis. These results showed that the flux pinning characteristics are enhanced for lower doping concentration of Mg at the charge reservoir layer sites.     

Prediction of short fatigue crack growth of Ti‐6Al‐4V

It is observed that the short fatigue cracks grow faster than long fatigue cracks at the same nominal driving force and even grow at stress intensity factor range below the threshold value for long cracks in titanium alloy materials. The anomalous behaviours of short cracks have a great influence on the accurate fatigue life prediction of submersible pressure hulls. Based on the unified fatigue life prediction method developed in the authors' group, a modified model for short crack propagation is proposed in this paper. The elastic–plastic behaviour of short cracks in the vicinity of crack tips is considered in the modified model. The model shows that the rate of crack propagation for very short cracks is determined by the range of cyclic stress rather than the range of the stress intensity factor controlling the long crack propagation and the threshold stress intensity factor range of short fatigue cracks is a function of crack length. The proposed model is used to calculate short crack propagation rate of different titanium alloys. The short crack propagation rates of Ti‐6Al‐4V and its corresponding fatigue lives are predicted under different stress ratios and different stress levels. The model is validated by comparing model prediction results with the experimental data.     

Biomechanics of oral mucosa

The prevalence of prosthodontic treatment has been well recognized, and the need is continuously increasing with the ageing population. While the oral mucosa plays a critical role in the treatment outcome, the associated biomechanics is not yet fully understood. Using the literature available, this paper provides a critical review on four aspects of mucosal biomechanics, including static, dynamic, volumetric and interactive responses, which are interpreted by its elasticity, viscosity/permeability, apparent Poisson''s ratio and friction coefficient, respectively. Both empirical studies and numerical models are analysed and compared to gain anatomical and physiological insights. Furthermore, the clinical applications of such biomechanical knowledge on the mucosa are explored to address some critical concerns, including stimuli for tissue remodelling (interstitial hydrostatic pressure), pressure–pain thresholds, tissue displaceability and residual bone resorption. Through this review, the state of the art in mucosal biomechanics and their clinical implications are discussed for future research interests, including clinical applications, computational modelling, design optimization and prosthetic fabrication.     

Synthesis of Boron Nitride Microtubes and Formation of Boron Nitride Nanosheets

Boron nitride microtubes are synthesized in a dual zone quartz tube furnace at 1200°C with ammonia as a reaction atmosphere. Field emission scanning electron microscopy (FE-SEM) results show a unique cone-like morphology of the tubes with larger internal space and thin walls structure. The diameters of the tubes were found to be in the range of 1 to ～2 µm with the walls thickness estimated to be from 10 to 100 nm. XPS survey shows N 1 s and B 1 s peaks at 398.7 and 191 eV, respectively, that represent h-BN in the sample. Raman spectroscopy indicates a high-intensity peak at 1372.53 (cm^?1) that corresponds to the E_2g mode of h-BN. Along with the novel tubular morphology of boron nitride microtubes, the present work also explains a mechanism for the formation of boron nitride nanosheets (from boron nitride microtubes) found in the FE-SEM results of the current sample.     

Efficient multi‐hop wireless broadcast protocol in vehicular networks using automated threshold function design

Vehicular networking applications often use multi‐hop wireless broadcasting as a primary data dissemination mechanism. Therefore, protocols that efficiently and thoroughly propagate application data while adapting to a wide range of network density, vehicle distribution pattern, channel quality, and other conditions are critical for vehicular communications. Here, we design the Statistical Vehicular Broadcast (SVB) protocol to efficiently distribute data via multi‐hop broadcast in vehicular networks. First, we present an automated optimization technique for the design of threshold functions in statistical broadcasting methods. Next, we compare and analyze known statistical techniques, including different fundamental methods, assessment delay algorithms, and failsafe mechanisms. All combinations of these techniques are given threshold functions optimized using the proposed automated procedure then are evaluated in a wide range of simulations. High‐level statistical design principles and recommendations are established based on analysis of these results. Finally, we apply those principles to design SVB. It is evaluated in JiST/SWANS and is shown to achieve a high target reachability level while consuming less bandwidth than similar protocols across urban and highway vehicular networking scenarios.Copyright © 2014 John Wiley & Sons, Ltd.     

Recovery error bounds on compressed sensing of noisy signals

Compressed sensing is an emerging technique in the field of digital signal acquisition. It promises almost exact recovery of high‐dimensional signals from a very small set of measurements. However, this technique is challenged by the task of recovering signals immersed in noise. In this paper, we derive upper and lower bounds on mean squared recovery error of noisy signals. These bounds are valid for any number of acquired measurements and at any signal‐to‐noise ratio. This work is highly useful for the design of any compressed sensing‐based real world application by quantifying recovery error entailed with realistic digital signal acquisition scenarios. Copyright © 2013 John Wiley & Sons, Ltd.     

BN–Graphene Composites Generated by Covalent Cross‐Linking with Organic Linkers

Composites of boron nitride (BN) and carboxylated graphene are prepared for the first time using covalent cross‐linking employing the carbodiimide reaction. The BN_1–xG_x (x ≈ 0.25, 0.5, and 0.75) obtained are characterized using a variety of spectroscopic techniques and thermogravimetric analysis. The composites show composition‐dependent electrical resistivity, the resistivity decreasing with increase in graphene content. The composites exhibit microporosity and the x ≈ 0.75 composite especially exhibits satisfactory performance with high stability as an electrode in supercapacitors. The x ≈ 0.75 composite is also found to be a good electrocatalyst for the oxygen reduction reaction in fuel cells.