A 50-MS/s (35 mW) to 1-kS/s (15 /spl mu/W) power scaleable 10-bit pipelined ADC using rapid power-on opamps and minimal bias current variation

A novel rapid power-on operational amplifier and a current modulation technique are used in a 10-bit 1.5-bit/stage pipelined ADC in 0.18-/spl mu/m CMOS to realize power scalability between 1 kS/s (15 /spl mu/W) and 50 MS/s (35 mW), while maintaining an SNDR of 54-56 dB for all sampling rates. The current modulated power scaling (CMPS) technique is shown to enhance the power scaleable range of current scaling by 50 times, allowing ADC power to be varied by a factor of 2500 while only varying bias currents by a factor of 50. Furthermore, the nominal power is reduced by 20%-30% by completely powering off the rapid power-on opamps during the sampling phase in the pipeline's sample-and-holds.     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Excimer laser-facilitated angioplasty for undilatable coronary narrowings

Calcified and fibrotic coronary artery lesions cannot always be dilated with conventional balloon angioplasty even at high pressures. This study examines the success of excimer laser facilitated angioplasty in 38 lesions in 37 patients with lesions that failed balloon angioplasty alone.     

Gelling of alginate fibres

Equipment was developed to measure the time for complete gelling of sodium alginate fibres in calcium chloride solution, taken as the time to achieve maximum tensile strength. The effects of fibre diameter, alginate concentration, alginate composition and calcium chloride concentration on gelling time were investigated. A diffusional model, developed to predict the gelling time, agreed with experimental results except for the effect of calcium ion concentration which was modelled empirically.     

Simulation of leachate migration in leaky aquifers

A two-dimensional cross-section finite difference model is presented to simulate density dependent leachate migration in leaky aquifers. Unlike existing models, a new approach is adopted to couple the groundwater-flow equation and the hydrodynamic dispersion equation with the elimination of the intermediate step of calculating velocities. The concept of the reference density is employed, permitting increased accuracy (over pressure-based models) in the representation of the transport process. The model is then used to study the effect of several hydraulic and transport parameters on the flow pattern and plume migration which are found to be very sensitive to most of these parameters. Equiconcentration and equipotential lines are overlapped to provide a better understanding of the coupling effect.     

Theory of a multiply fed and loaded insulated linear antenna in air

Analytic expressions are derived for the input admittance and the current distribution along the multiply fed and loaded insulated antenna in air which is excited across feed gaps of nonzero widths. The Wiener-Hopf type analysis for a center fed insulated antenna is combined with the axial field discontinuity (AFD) method to develop the current and admittance expression. This AFD method considers the metallic surface of the linear antenna as a series combination of longitudinal, electric-field surface functions that exist due to feeding and/or loading. The analysis, which does not employ superposition of even and odd distributions of sources and loads, yields final expressions in terms of the excitation location, its aperture electric field within the feed gaps, impedance locations, and their values. The current distribution for cases of unity dielectric constant shows an excellent agreement with data based on the moment method. The input admittances and current distributions are reported for different multiple excitations and loads and dielectric constants of the insulator     

Flow reversal in the descending aorta: a guide to intraoperative assessment of aortic regurgitation with transesophageal echocardiography

This study assessed the value of biplane transesophageal echocardiographic assessment of diastolic flow reversal in the descending aorta as an alternative to Doppler color flow imaging in determining severity of aortic regurgitation. In 45 patients undergoing cardiac operations, the severity of aortic regurgitation was assessed by semiquantitative grading of the width of the Doppler color flow regurgitant jet relative to the left ventricular outflow tract, and the presence of diastolic flow reversal was assessed with pulsed-wave Doppler measurements at three sites in the descending aorta. In four patients, the diastolic flow reversal method was the only available form of assessment because of inadequate visualization of the left ventricular outflow tract beneath a mitral valve prosthesis. Diastolic flow reversal in the descending aorta was not observed in patients without aortic regurgitation and was always present in patients with severe aortic regurgitation. Aortic valve replacement successfully eliminated descending aortic flow reversal in all 19 patients in whom it was present before valve replacement. Identification of diastolic flow reversal at multiple sites in the descending aorta with biplane transesophageal echocardiography helps to confirm the presence of severe aortic regurgitation and can serve as an alternative method of assessment when visualization of the left ventricular outflow tract is impaired.     

A new method of excitation control based on fuzzy set theory

The synthesis of the structure of the power system stabiliser (PSS) and its parametrization are based entirely on methods of linear system theory. Thus the desired effect of the PSS is limited to a bounded area around one system operating point. The use of a controller based on fuzzy set theory introduces an event controlled excitation of the synchronous machine taking into account the power system operation. The desired response of the fuzzy controller is given by a set of rules which are obtained from the limits of the voltage regulator and the undesired performance of the conventional excitation control. A fuzzy controller has been developed for which simulation results are provided. These results support the concept of a fuzzy controller for the purpose of excitation control. They show that a well designed fuzzy controller is superior to a fast excitation control with an additional PSS     

Thickness-dependence of stoichiometry and microstructure characteristics in correlation with conductivity type of CdTe films

CdTe films were prepared by physical vapour deposition on a substrate at room temperature (RT) as well as on a cold (LT) one using low deposition rate. The thickness-dependence of stoichiometry revealed an abrupt decrease in the Cd/Te ratio as the thickness increases. Change of thickness did not affect the type of observed (111) crystallographic texture, only the degree of preferred orientation is enhanced as the film grows. The internal strain was negligible while the crystallite size increased rapidly at small thickness (up to 400 nm), and less thickness dependence was observed with further film growth. However, thickness dependence of lattice parameters showed a minimum and a maximum at approximately 300 nm in the case of RT and LT, respectively. The observed change in conductivity from n- to p-type and its vital correlation with the stoichiometry and structural characteristics were presented. Based on thickness dependence of stoichiometry and lattice parameters as well as the conductivity type, formation and annihilation of lattice defects were considered.