Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

In vacuo production of α-AlB12, C4AlB24, AlB12C2 and Al3B48C2 powders

The production of pure powder samples of boron-rich ternary Al–B–C phases was investigated in vacuum at temperatures between 1400 °C and 1600 °C, using a range of different starting powders. Compacted powder mixes of B–AlB₂–B₄C, Al–B–C, Al–B–B₄C, B–C–AlB₂, B–AlB₂ and Al–B were heated for 1–2 h under vacuum in a carbon resistance furnace and the products characterised by X-ray diffraction. It was found impossible to produce significant quantities of C₄AlB₂₄ under these conditions, but >95% pure samples of α-AlB₁₂, AlB₁₂C₂ and Al₃B₄₈C₂ were obtained. This study is a precursor to further research aimed at producing dense B₄C-type materials which might offer the advantages of easier densification and fabrication as compared with B₄C itself.     

Selective separation of cobalt and nickel by flat sheet supported liquid membrane using Alamine 300 as carrier

Cobalt and nickel are among the most important nonferrous metals. The using of flat sheet supported liquid membranes (FSSLMs) to remove metals from wastewaters has been used actively by the scientific and industrial communities. In this study, the selective separation of cobalt from thiocyanate solutions containing cobalt and nickel by FSSLM was examined using tri-n-octylamine (Alamine 300) as carrier. The FSSLM was consisted of extractant, flat sheet support and organic solvent. The various parameters were studied to determine the optimum extraction and striping conditions of cobalt and nickel. These parameters were stirring speeds of phases, NH₄SCN concentration, pH, diluent type, extractant concentration, stripping reagent concentration and modifier concentration. Concentration of cobalt and nickel were determined by Shimadzu AA-6701GF spectrophotometer. In the optimum conditions, selective separation of cobalt was achieved with an efficiency of 98.4% within 8 h, for equimolar feed mixtures, 400 mg/L Co + 400 mg/L Ni, and the separation factor of Co(II) over Ni(II) was 234.4. In addition, for nonequimolar feed mixtures, 500 mg/L Co + 1000 mg/L Ni, Ni in excess, selective separation of cobalt was 99.9%, and the separation factor of Co was 506 in the same time.     

Friction and wear behavior of styrene butadiene rubber‐based composites reinforced with microwave‐devulcanized ground tire rubber

In this work, the tribological properties of a new material obtained by revulcanization with styrene butadiene rubber (SBR) and devulcanized ground tire rubber (GTR) were investigated. GTR was devulcanized using the microwave method at a constant power while varying the microwave exposure time. Devulcanized rubber (DV‐R) and untreated GTR were revulcanized by mixing with SBR at different rates (10, 30, 50 phr). To determine friction and wear characteristics of the samples, pin (ball) on disc and abrasion tests were conducted. Scanning electron microscopy (SEM) was employed to observe the worn surfaces of the composites to correlate the experimental test results to the wear mechanisms. All of these tests and experiments were performed on original vulcanized rubber samples for comparison. The composites exhibited different friction and wear behavior due to morphology, dispersion behavior and devulcanization functionalization of ground tire rubber. In general, DV‐R/SBR composites exhibited improvement in both mechanical and tribological properties. However, the enhanced compatibility of DV‐R resulting from the specific chemical coupling of DV‐R with SBR was crucial for the mechanical, friction and wear properties. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42419.     

Optimization of dielectric heating parameters in the production of high‐voltage LiNiPO4‐core and carbon‐shell ceramics

Excellent core‐shell morphology and nanoscale high‐voltage LiNiPO₄@C cathode materials have been synthesized by a low‐level and long‐time microwave and solvothermal synthesis methodology. The effects of the changing physicochemical parameters on the crystal‐quality and electrochemical properties of the products have been evaluated in relation to the cycling stability. X‐ray diffraction analysis shows that it is possible to synthesize phase‐pure LiNiPO₄ material when the reaction parameters are carefully elaborated. High‐resolution transmission electron microscopy analysis reveals a core‐shell morphology with a coating thickness of 6‐8 nm for 30 minutes at 180°C solvothermal temperature and time‐spread microwave energy. This mentioned cathode material exhibits the best electrochemical properties, achieving a discharge capacity of 157 mAh·g^?1 at a 0.l C current rate, and shows a remarkable 81% capacity retention at the end of the 80th cycle.     

Electrochemical and optical properties of dicyclohexylmethyl substituted poly(3,4‐propylenedioxythiophene) analogue

An analogue of disubstituted 3,4‐propylenedioxythiophenes, namely 3,3‐bis(cyclohexylmethyl)‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin (ProDOT‐CycHex₂), was synthesized and its electrochemical polymerization was carried out successfully in an electrolyte solution of 0.1 M tetrabutylammonium hexafluorophosphate dissolved in a mixture of acetonitrile and dichloromethane (3/1: v/v). The corresponding polymer called PProDOT‐CycHex₂ has a reduced band gap of 1.85 eV and an electrochromic property: blue/violet when neutralized and highly transparent when oxidized. Also, PProDOT‐CycHex₂ film exhibited faster response time (0.7 s) and higher coloration efficiency (769 cm²/C) during oxidation when compared to its benzyl substituted analogue. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46214.     

Antibacterial poly{(4‐vinyl phenylboronic acid)‐co‐[2‐(dimethylamino)ethyl methacrylate]} copolymers and their application in water‐based paints

Herein, we report the synthesis of poly(4‐vinylphenylboronic acid) (PVPBA) and poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) homopolymers, copolymers, and their methyl, pentyl, and octyl quaternized forms as dopant in water‐based permanent antibacterial paints. Both quaternized and nonquaternized forms of P(VPBA‐co‐DMAEMA) copolymers have reflected higher MIC values relative to PDMAEMA homopolymers. High molecular weight copolymers were more active against Escherichia coli ATCC 25922, contrarily, lower molecular weight copolymers showed higher antibacterial activity against Staphylococcus aureus ATCC 25923. The paint films prepared with quaternized PDMAEMA homopolymers with a weight of 10% showed better antibacterial activity in water and airborne tests than the copolymers. However, it has been shown that the inadequate anti‐biofilm properties of homopolymer‐containing paint films are overcome with the VPBA content of the copolymer structure and the most effective antibacterial and anti‐biofilm properties have been obtained with paint films containing P(VPBA‐co‐5QDMAEMA) copolymers. These paint films, which can maintain antibacterial and anti‐biofilm properties for at least 1 year, have the potential to be an alternative to Ag/Cl based solid surfaces which require the active substance to be regenerated. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46245.     

Structural,Electrical and Photoresponse Properties of Si-based Diode with Organic Interfacial Layer Containing Novel Cyclotriphosphazene Compound

The electrical and photoresponse properties of Al/p-Si/organic layer/Al diode were investigated. Organic layer containing novel 2,2-bis[spiro(7,8-dioxy- 4-methylcoumarin)]-4,4,6,6-bis[spiro(2’,2”-dioxy-1’,1”- biphenylyl)]cyclotriphosphazene compound was coated by drop casting method on p-Si having ohmic contact. The structural characterization of novel cyclotriphosphazene compound was confirmed by using ¹H, ¹³C and ³¹P-NMR, elemental analysis and FT-IR spectroscopic techniques. The diode exhibits a photoconducting and photodiode behavior under solar light illumination. The electrical parameters such as ideality factor, barrier height and series resistance of the diode were determined from I-V characteristics. It is seen that the photocurrent of the diode under illumination is higher than dark current. Also, the frequency dependence of capacitance (C) and conductance (G) was explained on the basis of interface states. It is evaluated that the hybrid photodiode can be used as a photosensor in organic photodetector applications.     

Properties of pumice aggregate concretes at elevated temperatures and comparison with ANN models

The mechanical properties and thermal conductivity of concretes including pumice aggregate (PA) exposed to elevated temperature were analyzed by thermal conductivity, compressive strength, flexure strength, dynamic elasticity modulus (DEM) and dry unit weight tests. PA concrete specimens were cast by replacing a varying part of the normal aggregate (0–2 mm) with the PA. All concrete samples were prepared and cured at 23 ± 10C lime saturated water for 28 days. Compressive strength of concretes including PA decreased that reductions were 14, 19, 25 and 34% for 25, 50, 75 and 100% PA, respectively. The maximum thermal conductivity of 1.9382 W/mK was observed with the control samples containing normal aggregate. The tests were carried out by subjecting the samples to a temperature of 0, 100, 200, 300, 400 500, 600 and 700 °C for 3 h, then cooling by air cooling or in water method. The results indicated that all concretes exposed to a temperature of 500 and 700 °C occurred a significant decrease in thermal conductivity, compressive strength, flexure strength and DEM. An artificial neural network (ANN) approach was used to model the thermal and mechanical properties of PA concretes. The predicted values of the ANN were in accordance with the experimental data. The results indicate that the model can predict the concrete properties after elevated temperatures with adequate accuracy. Copyright © 2016 John Wiley & Sons, Ltd.