An application of the degree-hours method to estimate the residential heating energy requirement and fuel consumption in Istanbul

Cold season heating energy requirements in buildings can be estimated with the degree-hours method based on human comfort levels and available meteorological temperature records for a given area. Such estimations are especially significant for cities where fossil fuel consumption must be eliminated in favor of clean energy alternatives to reduce air pollution. This paper considers the city of Istanbul in Turkey and presents a detailed account for practical energy requirements and fuel consumption calculations.     

Adaptive three-dimensional cellular genetic algorithm for balancing exploration and exploitation processes

This paper presents a new adaptive algorithm that aims to control the exploration/exploitation trade-off dynamically. The algorithm is designed based on three-dimensional cellular genetic algorithms (3D-cGAs). In this study, our methodology is based on the change in the global selection pressure induced by dynamic tuning of the local selection rate. The parameter tuning of the local selection method is a way to define the global selection pressure. A diversity speed measure is used to guide the algorithm. Therefore, the integration of existing techniques helps in achieving our aims. A benchmark of well-known continuous test functions and real world problems was selected to investigate the effectiveness of the algorithm proposed. In addition, we provide a comparison between the proposed algorithm and other static and dynamic algorithms in order to study the different effects on the performance of the algorithms. Overall, the results show that the proposed algorithm provides the most desirable performance in terms of efficiency, efficacy, and speed for most problems considered. The results also confirm that problems of various characteristics require different selection pressures, which are difficult to be identified.     

Migration behavior of landfill leachate contaminants through alternative composite liners

Four identical pilot-scale landfill reactors with different alternative composite liners were simultaneously operated for a period of about 540 days to investigate and to simulate the migration behaviors of phenolic compounds (phenol, 2-CP, 2-MP, 3-MP, 4-MP, 2-NP, 4-NP, 2,4-DNP, 2,4-DCP, 2,6-DCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,6-TeCP, PCP) and heavy metals (Pb, Cu, Zn, Cr, Cd, Ni) from landfill leachate to the groundwater. Alternative landfill liners of four reactors consist of R1: Compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R2: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R3: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + bentonite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn), and R4: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + zeolite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn). Wastes representing Istanbul municipal solid wastes were disposed in the reactors. To represent bioreactor landfills, reactors were operated by leachate recirculation. To monitor and control anaerobic degradation in the reactors, variations of conventional parameters (pH, alkalinity, chloride, conductivity, COD, TOC, TKN, ammonia and alcaly metals) were also investigated in landfill leachate samples. The results of this study showed that about 35-50% of migration of organic contaminants (phenolic compounds) and 55-100% of migration of inorganic contaminants (heavy metals) to the model groundwater could be effectively reduced with the use of bentonite and zeolite materials in landfill liner systems. Although leachate contaminants can reach to the groundwater in trace concentrations, findings of this study concluded that the release of these compounds from landfill leachate to the groundwater may potentially be of an important environmental concern based on the experimental findings.     

A study on soil-structure interaction analysis in canyon-shaped topographies

In this paper, a coupled finite and infinite element system is used to study the effects of canyon-shaped topography and geotechnical characteristics of the soil on the dynamic response of free surface and of 2-D soil-structure systems under ground motion. A parametric study is carried out for canyon-shaped topographies. It is concluded that topographic conditions may have important effects on the ground motion along the canyon. Geotechnical properties of the soil also have significant amplification effects on the whole system motion, which cannot be neglected for design purposes. Thus, the dynamic response of both free surface and a soil-structure system are primarily affected by surface shapes and geotechnical properties of the soil. Location of the structure is another parameter affecting the whole system response.     

A universal low-noise analog receiver baseband in 65-nm CMOS

In this paper, a novel universal receiver baseband approach is introduced. The chain includes a post-mixer noise shaping blocker pre-filter, a programmable-gain post mixer amplifier (PMA) with blocker suppression, a differential ramp-based novel linear-in-dB variable gain amplifier and a Sallen–Key output buffer. The 1.2-V chain is implemented in a 65-nm CMOS process, occupying a die area of 0.45 mm². The total power consumption of the baseband chain is 11.5 mW. The device can be tuned across a bandwidth of 700-KHz to 5.2-MHz with 20 kHz resolution and is tested for two distinct mobile-TV applications; integrated services digital broadcasting-terrestrial ISDB-T (3-segment f _c = 700 kHz) and digital video broadcasting-terrestrial/handheld (DVB-T/H f _c = 3.8 MHz). The measured IIP3 of the whole chain for the adjacent blocker channel is 24.2 and 24 dBm for the ISDB-T and DVB-T/H modes, respectively. The measured input-referred noise density is 10.5 nV/sqrtHz in DVB-T/H mode and 14.5 nV/sqrtHz in ISDB-T mode.     

Modification of Leather Surface with Atmospheric Pressure Plasma and Nanofinishing

In this study, the effect of plasma treatment and nanofinishing on leather properties was investigated. O₂ and N₂ gases were used for activating the leather surface, and thin layers were deposited by hexamethyldisiloxane and tetraethyloxysilane. Nanofinishing process was performed using TiO₂–SiO₂ nanocomposite solution. The surface properties of the treated leathers were characterized by scanning electron microscopy and atomic force microscopy. The results showed that the hydrophobicity of leather was clearly improved after plasma end treatment with hexamethyldisiloxane, while treatment with tetraethyloxysilane increased its hydrophilic property. Moreover, the fastness properties and water vapor permeability of leathers were improved.     

Form-Stabilized Polyethylene Glycol/Palygorskite Composite Phase Change Material: Thermal Energy Storage Properties,Cycling Stability,and Thermal Durability

In this work, polyethylene glycol (PEG) as a phase change material (PCM) was incorporated with palygorskite (Pal) clay to develop a novel form-stable composite PCM (F-SCPCM). The Pal/PEG(40 wt%) composite was defined as F-SCPCM and characterized using SEM/EDS, FT-IR, XRD, DSC, and TGA techniques. The DSC results revealed that the F-SCPCM has a melting temperature of 32.5°C and latent heat capacity of 64.3 J/g for thermal energy storage (TES) applications. Thermal cycling test showed that the F-SCPCM had good cycling thermal/chemical stability after 500 cycles. The TGA data proved that that both cycled and non-cycled F-SCPCMs had considerable high thermal durability. Consequently, the created F-SCPCM could be considered as an additive material for production of green construction components with TES capability. POLYM. ENG. SCI., 60:909–916, 2020. © 2020 Society of Plastics Engineers     

Synthesis and characterization of PMMA composites activated with starch for immobilization of L‐asparaginase

Poly (methyl methacrylate) (PMMA)–starch composites were prepared by emulsion polymerization technique for L‐asparaginase (L‐ASNase) immobilization as highly activated support. The hydroxide groups on the prepared composites offer a very simple, mild and firm combination for enzyme immobilization. The pure PMMA and PMMA‐starch composites were characterized as structural, thermal and morphological. PMMA‐starch composites were found to have better thermal stability and more hydrophilic character than pure PMMA. L‐ASNase was immobilized onto PMMA‐starch composites contained the different ratio of starch (1, 3, 5, and 10 wt %). Immobilized L‐ASNase showed better performance as compared to the native enzyme in terms of thermal stability and pH. K_m value of immobilized enzyme decreased approximately eightfold compared with the native enzyme. In addition to, immobilized L‐ASNase was found to retain 60% of activity after 1‐month storage period at 4 °C. Therefore, PMMA‐starch composites can be provided more advantageous in terms of enzymatic affinity, thermal, pH and storage stability as L‐ASNase immobilization matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43421.