A universal low-noise analog receiver baseband in 65-nm CMOS

In this paper, a novel universal receiver baseband approach is introduced. The chain includes a post-mixer noise shaping blocker pre-filter, a programmable-gain post mixer amplifier (PMA) with blocker suppression, a differential ramp-based novel linear-in-dB variable gain amplifier and a Sallen–Key output buffer. The 1.2-V chain is implemented in a 65-nm CMOS process, occupying a die area of 0.45 mm². The total power consumption of the baseband chain is 11.5 mW. The device can be tuned across a bandwidth of 700-KHz to 5.2-MHz with 20 kHz resolution and is tested for two distinct mobile-TV applications; integrated services digital broadcasting-terrestrial ISDB-T (3-segment f _c = 700 kHz) and digital video broadcasting-terrestrial/handheld (DVB-T/H f _c = 3.8 MHz). The measured IIP3 of the whole chain for the adjacent blocker channel is 24.2 and 24 dBm for the ISDB-T and DVB-T/H modes, respectively. The measured input-referred noise density is 10.5 nV/sqrtHz in DVB-T/H mode and 14.5 nV/sqrtHz in ISDB-T mode.     

Giga-hertz rate single slope conversion technique with 512-phase RTWO

In this paper, an 8-bit 1.2 Gsample/s single-slope ADC architecture is presented. The proposed technique utilizes the picosecond-accurate phases of a rotary traveling wave oscillator (RTWO). The proof-of-concept test chip is fabricated in a 0.18-μm CMOS process and occupies 1.3 mm  ×  1.3 mm of die area. Power consumption is 36 mW for the core and 135 mW for on-chip clocks.     

Periodic variation method for blind symbol rate estimation

In order to obtain unknown symbol rate of incoming signal at a receiver, in this paper, cyclostationary features of linear digitally modulated signals are exploited by proposed periodic variation method. A low complexity but highly accurate symbol rate estimation technique is obtained. The proposed method is based on a superposed epoch analysis over autocorrelations obtained blindly in different sampling frequencies. The obtained autocorrelations are analyzed in the frequency domain, and it is seen that there are large oscillations when the autocorrelation is obtained around the symbol rate. Then, a superposed epoch analysis is developed in order to estimate symbol rate based of the periodic variations on the frequency responses of autocorrelations. The proposed algorithm is quite accurate in the noisy environment because the noise is having no frequency component after taking Fourier transform of autocorrelations in all sampling rates, and this feature is also valid for the offset frequency that the purposed estimation is not affected by offset frequency. Thus, a successful blind symbol rate estimation algorithm is obtained, and it performs much better error performance than those using the well‐known cyclic correlation based symbol rate estimations, as it is proven by the obtained performances presented in the paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Structural advantages of rectangular-like channel cross-section on electrical characteristics of silicon nanowire field-effect transistors

We have experimentally demonstrated structural advantages due to rounded corners of rectangular-like cross-section of silicon nanowire (SiNW) field-effect transistors (FETs) on on-current (I_ON), inversion charge density normalized by a peripheral length of channel cross-section (Q_inv) and effective carrier mobility (μ_eff). The I_ON was evaluated at the overdrive voltage (V_OV) of 1.0 V, which is the difference between gate voltage (V_g) and the threshold voltage (V_th), and at the drain voltage of 1.0 V. The SiNW nFETs have revealed high I_ON of 1600 μA/μm of the channel width (w_NW) of 19 nm and height (h_NW) of 12 nm with the gate length (L_g) of 65 nm. We have separated the amount of on-current per wire at V_OV = 1.0 V to a corner component and a flat surface component, and the contribution of the corners was nearly 60% of the total I_ON of the SiNW nFET with L_g of 65 nm. Higher Q_inv at V_OV = 1.0 V evaluated by advanced split-CV method was obtained with narrower SiNW FET, and it has been revealed the amount of inversion charge near corners occupied 50% of all the amount of inversion charge of the SiNW FET (w_NW = 19 nm and h_NW = 12 nm). We also obtained high μ_eff of the SiNW FETs compared with that of SOI planar nFETs. The μ_eff at the corners of SiNW FET has been calculated with the separated amount of inversion charge and drain conductance. Higher μ_eff around corners is obtained than the original μ_eff of the SiNW nFETs. The higher μ_eff and the large fractions of I_ON and Q_inv around the corners indicate that the rounded corners of rectangular-like cross-sections play important roles on the enhancement of the electrical performance of the SiNW nFETs.     

Prediction of energy consumption for LoRa based wireless sensors network

Wireless Networks - This paper shows a method for predicting the lifetime of a wireless sensor network based on the LoRa Ra-01 wireless modules. To develop a prediction model of the energy...     

Adaptive multichannel decision feedback equalization for volterra type nonlinear communication channels

A model-based approach for the decision feedback equalization of Volterra type nonlinear communication channels is proposed such that the linear model-based decision feedback equalization can be considered as a special case of the proposed approach. In designing the decision feedback equalizer, the nonlinear decision feedback equalization problem is visualized as a linear, multichannel equalization problem. A complete modified Gram–Schmidt orthogonalization of the input vector is achieved by using modified sequential processing multichannel lattice stages. The elements of the multichannel desired signal vector are then estimated from the new orthogonal set by using only scalar operations. The probability of error performance of the proposed equalizer is improved by the estimation of the elements of the desired signal vector through a sigmoid activation function so that a polynomial perceptron equalizer is realized. The comparative computational complexity calculations and performance results of the proposed decision feedback equalizer are also provided.     

Performance analysis of dual-hop fixed-gain AF relaying systems with OSTBC over Nakagami-m fading channels

In this paper, we present outage probability and symbol error rate (SER) performance analyses of a dual-hop transmission using fixed-gain amplify-and-forward relaying in flat Nakagami-m fading channels. The system under consideration is equipped with multiple antennas at source and destination adopting orthogonal space-time block coding to provide transmit diversity and maximum ratio combining to provide receive diversity, respectively. For integer and half-integer m values, closed forms of exact outage probability and moment generating function (MGF) expressions are derived through cumulative distribution function (CDF) of the overall system signal-to-noise ratio. Closed-form exact SER expressions based on the overall CDF are obtained for binary phase shift keying, binary frequency shift keying and M-ary pulse amplitude modulation. Exact SER expressions based on the MGF method are also obtained for binary differential phase shift keying, M-ary phase shift keying and M-ary quadrature amplitude modulation. Moreover, the asymptotic diversity order analysis is performed through derivations of asymptotic outage probability and SER. Theoretical analyses are validated by Monte Carlo simulations showing perfect match between each other.     

Entropy production due to free convection in partially heated isosceles triangular enclosures

A numerical analysis of the entropy production has been performed due to natural convection heat transfer and fluid flow in isosceles triangular enclosures with partially heated from below and symmetrically cooled from sloping walls. Governing equations are solved by finite difference method. Governing parameters on flow and temperature fields are Rayleigh number (10³  Ra  8.8 × 10⁵), dimensionless length of heater (0.25  (ℓ′ = ℓ/L)  1.0), dimensionless location of heater (0.25  (c′ = c/L)  0.75) and inclination angle of slopping walls (30°  β  60°). Heat transfer results are presented in terms of local and mean Nusselt numbers (Nu) while entropy production results are shown with entropy production number (N_s) and Bejan number (Be). Isotherms, streamlines, contours of entropy production due to heat transfer and fluid friction irreversibility are plotted. It is observed that entropy production number increases but Bejan number decreases with increasing of Rayleigh number. However, both entropy production due to heat transfer and fluid friction irreversibility are affected by higher inclination angle of triangle and length of heater.     

Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells

The hygro-thermo-mechanical properties and response of a class of reinforced perfluorosulfonic acid membranes (PFSA), that has potential application as an electrolyte in polymer fuel cells, are investigated through both experimental and numerical modeling means. A critical set of material properties, including Young's modulus, proportional limit stress, break stress and break strain, is determined for a range of temperature and humidity levels in a custom-built environmental test apparatus. The swelling strains are also determined as functions of temperature and humidity level. To elucidate the mechanical response and the potential effect these properties have on the mechanical durability, mechanics-based simulations are performed using the finite element method (ABAQUS). The results indicate that the relatively high strength of the experimental membrane, in combination with its relatively low in-plane swelling due to water absorption, should have a positive influence on membrane durability, potentially leading to longer life times for polymer electrolyte membrane fuel cells (PEMFC).     

Performance of disturbance augmented control design in turbulent wind conditions

This paper investigates the use of disturbance models in the design of wind turbine individual pitch controllers. Previous work has used individual pitch control and disturbance models with the Multiblade Coordinate Transformation to design controllers that reduce the blade loads at the frequencies associated with the rotor speed. This paper takes a similar approach of using a disturbance model within the H_∞ design framework to account for periodic loading effects. The controller is compared with a baseline design that does not include the periodic disturbance model. In constant wind speeds, the disturbance model design is significantly better than the baseline design at canceling blade loads at the rotor frequencies. However, these load reduction improvements become negligible even under low turbulent wind conditions. The two controllers perform similarly in turbulent wind conditions because disturbance augmentation improves load reduction only at the multiples of the rotor frequency in the yaw and tilt moment channels whereas turbulence creates strong collective bending moments. In addition, turbulent wind contains energy across a broad frequency spectrum and improvements at multiples of the rotor frequency are less important in these conditions. Therefore inclusion of periodic disturbance models in the control design may not lead to the expected load reduction in fielded wind turbines.