Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

A microbiological screening method for the indication of irradiation of frozen poultry meat

A microbiological screening method for the detection of irradiation of frozen poultry meat was developed on the basis of the combined use of total cell count by the direct epifluorescent filter technique (DEFT) and viable cell count by the aerobic plate count method (APC). Samples of ground, deboned poultry leg were irradiated or not with dose levels of 3, 5 and 7 kGy using an electron beam accelerator. All samples were frozen before the irradiation treatment. The average values of the differences between DEFT and APC counts in control samples and those irradiated with doses of 3, 5 and 7 kGy were 1.14 log units for control samples, and 3.16, 3.68 and 3.79 log units for the irradiated samples. A difference of at least 2 log units can therefore be considered as a limit value indicating probable irradiation treatment necessitating further investigations.

---

Anwendung eines mikrobiologischen Unterscheidungsverfahrens zum Nachweis der Bestrahlung von gefrorenem Hühnerfleisch

Zusammenfassung Es wurde ein mikrobiologisches Verfahren zum Nachweis der Bestrahlung von tiefgefrorenem Hühnerfleisch auf der Basis kombinierten Einsatzes direkter Epifluoreszenzfiltertechnik (DEFT) und Kolonieauszählung (APC) entwickelt. Die Proben - knochenfreie, zerkleinerte Hühnerschenkel - waren entweder unbestrahlt oder mit einem Elektronenbeschleuninger mit Dosen von 3, 5 bzw. 7 kGy bestrahlt worden. Alle Proben waren vor der Bestrahlung eingefroren worden. Die Mittelwerte der Differenzen zwischen den DEFT- und den APC-Ergebnissen betrugen bei den unbestrahlten Proben 1,14 logarithmische Einheiten und bei den mit 3, 5 bzw. 7 kGy bestrahlten Proben 3,16, 3,68 bzw. 3,79 logarithmische Einheiten. Die Differenz von wenigstens zwei logarithmischen Einheiten kann als Grenze für die Möglichkeit eines Nachweises eventueller Bestrahlung betrachtet werden und macht weitere Untersuchungen erforderlich.

     

Correction

The online version of the original article can be found at     

Distributed call rerouting in multiclass broadband networks

Broadband integrated services digital networks (B-ISDN) must handle multiclass traffic with diverse quality of service requirements. We consider a multiclass routing model in which routes are calculated in a distributed fashion by the call originating nodes. Within this general context, we address the problem of rerouting a set of previously routed calls to avoid a failed link. Under the approach we propose, a single node executes an aggregate, global rerouting of all affected calls and then converts the set of aggregate routes into an allocation of bandwidth on each link to call origination nodes for the purpose of rerouting. The bandwidth allocation is distributed to each origination node, which in turn then calculates routes for the individual calls. The problem faced by each call origination node is a variant of the socalled bandwidth packing problem. We develop and analyze an approximate algorithm for solving this problem in the specific context that arises in our setting.The research was supported by IBM Corporation and by NSF Grant No. CDR-8803012.On personal leave from IBM RTP.     

On concurrent error location and correction of FFT networks

Fault tolerance has been one of the major issues for the VLSI based FFT networks. In this paper, two efficient approaches for concurrent error location and correction of FFT networks are proposed. Using our approach, a faulty component can be located at an additional try followed by log₂m comparisons of m corrupted outputs. An error can also be corrected, once it is detected, at a small modification of basic module with an additional try. Moreover, our approaches are general in the sense that they can be implemented with any concurrent error detection scheme employing a checksum approach for FFT networks     

Enhanced surface morphology and transport property of poly(N‐vinylcarbazole)/gold nanocomposite Langmuir–Schaefer films

A composite of poly(N‐vinylcarbazole) (PVK) containing gold nanoparticles (GNPs) was synthesized via simple solid‐state in situ bulk polymerization of N‐vinylcarbazole in the presence of GNPs at a high temperature. Both PVK and PVK–GNP composites were characterized by Fourier transform infrared (FTIR) and UV–vis spectroscopy. The surface morphology of the composites was studied by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy, and transmission electron microscopy (TEM). Thermal stability was identified via thermogravimetric analysis. The composites were fabricated into films using the Langmuir–Schaefer process. The enhancement in the characteristics of room temperature I–V, pressure–area isotherms, and photoelectrochemical behaviors was observed in the composite films. Results suggest that a charge transfer process occurs across the hybrid at the interface of the PVK–GNP composites. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

压力容器定期检验方案的制定

以一台1万m3液化石油气球罐的定期检验方案为例,介绍一般压力容器定期检验方案的制定方法、内容和重点,供有关人员参考。     

基于S7300及Wicc flexible的粉状助剂称量系统应用

介绍了S7—300PLC及组态软件Winceflexible在全自动短流程染色示范线中粉状助剂称量系统设备的应用,以及设备系统的设计背景、系统的选型和实现。目前该设备在生产线上运行稳定,满足了整个生产过程的全自动生产要求。