便携式应用的半导体产品封装发展回顾

半导体封装主要是提供一个媒介,把精细的硅芯片连接到较粗糙间距的印制电路板上,并保护器件免于受潮。这些年间,虽然这个功能并未改变,但封装技术已远较从前复杂。由于芯片的性能逐步复杂封装已肩负着全部散热的责任,这些热量不能成为限制部件电子性能的因素。而且对便携式应用而言,由于空间越来越宝贵,也需要更小和更薄的封装。随着硅片工作频率的提高,走线电感需要减小。与此同时,封装方案必须具备成本效益以满足当前消费电子应用的价格目标。鉴于硅技术不断发展,封装不得不变得更轻薄、散热性能更佳、速度更快及成本更低!1引线封装市场上…     

Recent advances for serial processes of hazardous chemicals in fully integrated microfluidic systems

The development and enlargement of toxic and hazardous chemicals are severely limited by health and safety concerns. We summarize studies on fully integrated micro-chemical systems and total processes to reduce accidental exposure to various regents that are toxic, explosive, or carcinogenic, which significantly improved the safety of work involving risky compounds. This review covers the leak-free continuous-flow processes of hazardous chemicals in fully integrated microfluidic systems, specially denoted as micro-total envelope systems (μ-TESs), that are conducting a serial process of the generation of hazardous reagents, in-situ purification and separation, subsequent reaction, and product isolation with improved efficiencies. These attempts suggest safe and efficient tools and processes of useful but hazardous chemicals for researchers and manufacturing workers in the field of pharmaceutic discovery, natural products, biology as well as materials synthesis.     

Characterizations of surfactant synthesized from Jatropha oil and its application in enhanced oil recovery

Surfactants are frequently used in chemical enhanced oil recovery (EOR) as it reduces the interfacial tension (IFT) to an ultra‐low value and also alter the wettability of oil‐wet rock, which are important mechanisms for EOR. However, most of the commercial surfactants used in chemical EOR are very expensive. In view of that an attempt has been made to synthesis an anionic surfactant from non‐edible Jatropha oil for its application in EOR. Synthesized surfactant was characterized by FTIR, NMR, dynamic light scattering, thermogravimeter analyser, FESEM, and EDX analysis. Thermal degradability study of the surfactant shows no significant loss till the conventional reservoir temperature. The ability of the surfactant for its use in chemical EOR has been tested by measuring its physicochemical properties, viz., reduction of surface tension, IFT and wettability alteration. The surfactant solution shows a surface tension value of 31.6 mN/m at its critical micelle concentration (CMC). An ultra‐low IFT of 0.0917 mN/m is obtained at CMC of surfactant solution, which is further reduced to 0.00108 mN/m at optimum salinity. The synthesized surfactant alters the oil‐wet quartz surface to water‐wet which favors enhanced recovery of oil. Flooding experiments were conducted with surfactant slugs with different concentrations. Encouraging results with additional recovery more than 25% of original oil in place above the conventional water flooding have been observed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 2731–2741, 2017     

Hydrogen permeation during zinc-manganese alloy plating

Electrodeposition of metals from solution is usually accompanied by the simultaneous discharge of hydrogen ions or water molecules. When hydrogen is liberated at an iron/steel surface during electrodeposition, a portion of the hydrogen is absorbed by the metal surface and then diffuses into the interior. The diffused hydrogen produces some detrimental effects, such as reduction in ductility and loss in mechanical strength, leading to hydrogen embrittlement. The present paper reports investigations on hydrogen permeation measurements in zinc-manganese alloy deposition using a modified electrode clamp for easy removal and fixing of the electrode. Hydrogen permeation studies indicate that the porosity of the deposit increases in the following order:Zn-Mn(14.3%), Zn-Mn(2.4%), Zn-Mn(24.8%) and Zn-Mn(37.5%).This is in agreement with the corrosion data obtained which indicates that Zn-Mn alloy deposits with low manganese content show better performance than pure zinc deposits.     

Effect of hydrophilic and hydrophobic cyclodextrins on the release of encapsulated allyl isothiocyanate (AITC) and their potential application for plastic film extrusion

Allyl isothiocyanate (AITC), a natural pungent flavor from wasabi and horseradish, is well-known antimicrobial agents against foodborne pathogens. However, its highly volatile nature and low thermal stability restrict its application in the food packaging industry. Also, its strong organoleptic characteristics hinder its application at a higher dosage. We encapsulated AITC in β-cyclodextrin (β-CD) and triacetyl-β-CD (TA-β-CD) and evaluated the performance as slow releasing active compounds through low-density polyethylene (LDPE)–cyclodextrins (CDs) matrix. Also, the thermal, optical, mechanical, and barrier properties of two ternary blends, LDPE/β-CD/AITC(L-CDs) and LDPE/TA-β-CD/AITC(L-TACDs), were investigated to compare their compatibility under the plastic extrusion process. During the 15 days of the storage period, L-TACDs maintained more consistent AITC release and a higher concentration than L-CDs. Also, the blending of LDPE and TA-β-CD was more compatible with that of LDPE and β-CD. No significant optical, mechanical, and barrier property changes were observed in LDPE with less than 3% of TA-β-CD while L-CDs showed substantial agglomeration on the ternary blend films and the lower mechanical and barrier properties than pure LDPE. The results indicate that the LDPE films containing TA-β-CD/AITC can be applied as an effective antimicrobial packaging material for food and nonfood applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48137.     

Kinetics study on cnt‐supported RuKCo FTS catalyst in a fixed bed reactor

The rate of syngas (H₂/CO) consumption over a RuKCo/CNT Fischer–Tropsch synthesis (FTS) catalyst was measured in a fixed bed microreactor at 210–225°C, 2–3.5 MPa, H₂/CO feed molar ratios of 1–2.5, and gas hourly space velocity (GHSV) range of 2700–3600 h^?1. The data have been used to model the kinetics of the FTS reactions within the range of the studied conditions. One empirical power law model and four semi‐empirical kinetic models based on Langmuir–Hinshelwood‐type equation have been evaluated. The best fitting was obtained with the equation: similar to that proposed by Brötz et al. The estimated activation energy (E = 80–85 kJ/mol) is lower than that is reported in the literature. The validity of these results are restricted to fixed beds with the given catalyst in the tested conversion regime.     

Conjugated polymer mediated synthesis of nanoparticle clusters and core/shell nanoparticles

Two water soluble conjugated polymers, poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and ammonium ion stabilized poly(phenylene vinylene) (P2), are found to be able to reduce noble metal ions to zero-valent metals via a direct chemical deposition technique. Au nanoparticle clusters can be obtained through reduction of Au³⁺ ions by PEDOT:PSS and the electronic coupling between them can be controlled by HAuCl₄ concentration. Core/shell Ag/polymer nanostructures are prepared from reduction of Ag⁺ ions by P2, which have a ppb detection limit for 4-MBA using surface-enhanced Raman spectroscopy (SERS). This conjugated polymer mediated synthesis of metal nanoparticles may open a new avenue for fabricating nanomaterials and nanocomposites with tunable optical properties that are dominated by their structure and electronic coupling between nanoparticles.     

Microstructural Characterization and Mechanical Properties of Si3N4 Formed by Fused Deposition of Ceramics

We present processing (green and sintered), part shrinkage and warping, microstructural characterization, and mechanical properties of Si₃N₄ made by fused deposition of ceramics (FDC), using optical microscopy, scanning electron microscopy, and X-ray diffraction. The mechanical properties (fracture strength, fracture toughness, and Weibull modulus) are also reported. Proper FDC build parameters resulted in dense, homogeneous, near-net-shape Si₃N₄, with microstructures and mechanical properties similar to conventionally processed material. Mechanical properties are shown to be isotropic, while there is some degree of microstructural texturing (preferred β-Si₃N₄ grain orientation) in sintered components.