Viscosity of Gaseous Mixtures of HFC-134a (1,1,1,2-Tetrafluoroethane)+HFC-32 (Difluoromethane)

This paper reports experimental results for the viscosity of gaseous mixtures of HFC-134a (1,1,1,2-tetrafluoroethane)+HFC-32 (difluoromethane). The measurements were carried out with an oscillating-disk viscometer of the Maxwell type at temperatures from 298.15 to 423.15 K. The viscosity was measured for three mixtures containing 25.00, 52.40, and 74.98 mole% HFC-134a in HFC-32. Experimental results for the viscosity at normal pressures show a minimum as plotted against mole fraction in the higher temperature region, which may be the first experimental observation of the minima for dilute binary gaseous mixtures of HFCs. The viscosity at normal pressures was analyzed with the extended law of corresponding states developed by Kestin et al., and the scaling parameters were obtained for unlike-pair interactions between HFC-32 and HFC-134a. The modified Enskog theory developed by Vesovic and Wakeham was applied to predict the viscosity for the binary gaseous mixtures under pressure. As for the calculation of pseudo-radial distribution functions in mixtures, a method based on the equation of state for hard-sphere fluid mixtures proposed by Carnahan–Starling was applied.     

Comparison of Centralized and Decentralized Systems in Power System Restoration

This paper proposes a multiagent approach to decentralized power system restoration for distribution system networks and presents a comparison of centralized and decentralized systems for power system restoration. Numerous studies have been conducted on power system restoration problems. From the viewpoint of system structures, this research can be divided into two categories: centralized systems and decentralized systems. In this study, we solve a power system restoration problem for a power distribution network by two different methods: mathematical programming (MIP) and the proposed multiagent‐based method (MAS). The proposed multiagent system consists of several distributing substation agents (DSAGs) and load agents (LAGs). An LAG corresponds to the customer load, and a DSAG supplies electricity to the LAG. From the simulation results, it can be seen that the proposed system can reach the right solution by making use of only local information and that the solution quality is better than that of the centralized system (MIP). This means that the proposed multiagent restoration system is a promising approach to larger scale distribution networks.     

Optimal charging strategy for a residential PEV battery considering bidirectional trade and frequency regulation

International Journal of Control, Automation and Systems - A practical charging strategy for an individual plug-in electric vehicle (PEV) is proposed. A cost function is constructed to reflect...     

Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise

Calibration samples for the Barkhausen noise (BN) method were produced with laser processing. A planet gear wheel used for production quality control was subjected to laser irradiation to verify the BN sensor output. Different samples were found to respond similarly to the laser processing although the laser parameters needed to be adjusted for different surface qualities separately. The surface optimization for laser processing was studied with different surface qualities of samples. The ground surface was compared with a sandblasted and vibratory ground surface. The ground and sandblasted surfaces were both amenable to the laser processing whereas the vibratory grinding process created inhomogeneous surfaces for laser beam absorption. Laser processing was found to produce uniform changes in the residual stress values in two perpendicular measuring directions. The root mean square value of the BN voltage signal exhibited linear correlations with the values of the residual stress and surface hardness.     

The stability of monochlorotriazinyl reactive dyes on cellulose films in aqueous alkaline solutions containing peroxide bleaching agents

The stability of seven reactive (one difluoromonochloropyrimidinyl and six monochlorotriazinyl) dyes on cellulose immersed in sodium peroxoborate (PB) solution (UK–TO solution) containing tetraacetylethylenediamine (TAED) was examined using cellulosic films at 60 °C. The extent of dye loss that occurred from the dyed cellulosic films which were immersed in the UK–TO solution without detergent correlated closely to the ratings obtained using the BS 1006 UK–TO wash test. The dye loss that occurred from the dyed cellophane films was attributed to three contributions, namely, alkaline hydrolysis of dye–fibre bonds, oxidative fading of the dye chromophore by peroxides and cellulose degradation accelerated by PB and TAED. The alkaline hydrolysis of the dye–fibre bond and the extent of cellulose degradation in the UK–TO solution were the main contributions to the dye loss; dye oxidation was a minor factor in the dye loss mechanism. The physical bonding of the dye molecules reinforced the covalent dye–fibre bond stability towards the UK–TO solution.     

Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.