Effects of hydrophilicity of crosslinker on membrane properties of poly(N-hydroxyethyl-L-glutamine) hydrogels

Summary Poly(N-hydroxyethyl-L-glutamine) (PHEG) hydrogels were prepared by aminolysis of poly( -benzyl L-glutamate) with 2-aminoethanol and hydrophobic or hydrophilic crosslinkers, and the effect of the hydrophobicity of the crosslinkers was evaluated. The swelling properties, tensile properties and enzymatic degradation behavior were studied in phosphate buffered saline (PBS). The swelling ratio and degradation rate of these hydrogels were highly dependent on the hydrophobicity of the crosslinkers, while tensile properties were dependent on the swelling ratio, but not on the hydrophobicity of the crosskinkers.     

Effect of polymer density on polyethylene hollow fiber membrane formation via thermally induced phase separation

Microporous high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE) hollow fiber membranes were prepared from polyethylene–diisodecyl phthalate solution via thermally induced phase separation. Effect of the polyethylene density on the membrane structure and performance was investigated. The HDPE membrane showed about five times higher water permeability than the LDPE membrane because it had the larger pore and the higher porosity at the outer membrane surface. The formation of the larger pore was owing to both the initial larger structure formed by spinodal decomposition and the suppression of the diluent evaporation from the outer membrane surface due to the higher solution viscosity. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 471–474, 2004     

Polymer nanocomposites formation by the use of sodium montmorillonite dispersion in alcohol and a cationic surfactant

To enhance the formation of nanocomposites, we pretreated montmorillonite clay with a high‐boiling‐point alcohol or a combination of the alcohol and a cationic surfactant prior to melt mixing. The polymer matrix was melt‐mixed with sodium montmorillonite treated with alcohol or a combination of the alcohol and a cationic surfactant, and then, the alcohol was removed. This new method was applied to polymethyl methacrylate, polystyrene, polyethylene, and polypropylene compounds. The dual use of a surfactant and an alcohol for the treatment of montmorillonite enabled a high degree of intercalation of montmorillonite layers by polymethyl methacrylate chains, which was not obtained in untreated clay or clay treated with either the surfactant or alcohol individually. The process was not as successful with the polyhydrocarbons. There was some evidence for slightly enhanced intercalation for polystyrene, but there was less evidence for polyethylene and polypropylene. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1951–1957, 2004     

Fracture observation of polycrystalline diamond film under indentation test

Indentation tests using Vicker's pyramidal and Rockwell spherical diamond indenters were performed for polycrystalline diamond film deposited by chemical vapour deposition (CVD) on SiC substrate. Two types of film with different crystal sizes were tested. One is a film with grain size of 5 to 10 μm, denoted as MCD. Another one is a film with grain size of less than 100 nm, denoted as NCD.In the Vicker's test, we observed clear indentation and radial cracks for the NCD film, suggesting that micro-cracks tend to generate along the weak grain boundaries. Young's modulus, estimated from unloading curve of both films, agrees well with the value (928 GPa) estimated by the laser ultrasonic method.Rockwell indentation test predicts that the adhesion of the NCD film is lower than that of the MCD, and compressive residual stress of the MCD is much larger than that of the NCD. We observed ring cracks and detected acoustic emission (AE) signals from the ring cracks.     

Efficacy of Chemical Mimicry by Aphid Predators Depends on Aphid-Learning by Ants

Chemical mimicry is an effective strategy when signal receivers recognize and discriminate models by relying on chemical cues. Some aphid enemies mimic the cuticular chemicals of aphids through various means thus avoiding detection and attack by aphid-tending ants. However, because ants have been reported to learn the chemical signatures of aphids in order to distinguish the aphids, the efficacy of chemical mimicry is predicted to depend on the experience of the ants that had tended aphids. The present study tested this hypothesis using two predator species: larvae of the green lacewing Mallada desjardinsi, and larvae of the ladybeetle Scymnus posticalis. Lacewing larvae carry the carcasses of aphids on which they have preyed upon their backs, and these function via chemical camouflage to reduce the aggressiveness of aphid-tending ants toward the larvae. Ladybeetle larvae reportedly produce a covering of wax structures, and their chemicals appear to attenuate ant aggression. We examined whether the behavior of the ant Tetramorium tsushimae toward these predators changed depending on their aphid-tending experience. Ants moderated their aggressiveness toward both predators when they had previously tended aphids, indicating that chemical mimicry by both aphid predators is dependent on previous experience of the ants in tending aphids. Chemical mimicry by the predators of ant-tended aphids is therefore considered to exploit learning-dependent aphid recognition systems of ants.     

Enantioselective addition Of diketene to aldehydes promoted by chiral schiff base—titanium alkoxide complex. Application to asymmetric synthesis of potential inhibitors of HMG coenzyme reductase

Highly enantioselective addition of diketene to aldehydes was achieved by using novel Schiff base—titanium alkoxide complexes. Up to 92% ee of 5-hydroxy-3-oxoesters was obtained. This procedure provides an efficient method for the asymmetric synthesis of potential inhibitors of HMG coenzyme reductase.     

Increased activity of Chromobacterium viscosum lipase in AOT reverse micelles in the presence of short chain methoxypolyethylene glycol

The activity of Chromobacterium viscosum lipase (glycerol‐ester hydrolase, EC 3.1.1.3) entrapped in AOT/isooctane and AOT/Tween 85/isooctane reverse micelles was significantly increased by the addition of short chain methoxypolyethylene glycols (MPEGs), taking the hydrolysis of olive oil as a model reaction. The molecular weight of MPEG had a strong effect on the lipase activity, and MPEG of nominal molecular weight 550 was found to be the most effective. To optimize the factors affecting enzymatic hydrolysis of olive oil in reverse micellar systems containing MPEG 550, the effect of various parameters, such as W_o (molar ratio of water to surfactant), pH, ionic strength, surfactant concentration and temperature were investigated. A kinetic model considering the substrate adsorption equilibrium between the bulk phase of organic solvent and the micellar phase was also successfully used to understand the enzyme activity in the presence of MPEG 550. Both the Michaelis constant and the substrate adsorption equilibrium constant were obviously reduced as compared with those obtained in the simple AOT reverse micellar system. © 2001 Society of Chemical Industry     

Predicting Solid–Liquid Equilibrium of Fatty Acid Methyl Ester and Monoglyceride Mixtures as Biodiesel Model Fuels

Fatty acid methyl esters from plant oils are the main component of biodiesel and used as a substitute for petroleum diesel. Biodiesel generally contains a small amount of monoglycerides as intermediate compounds, which have high melting points and often solidify and clog fuel filters. The prediction of the cold-flow property of biodiesel is of great importance for practical application. In this study, a thermodynamic study was conducted for mixtures of monoglycerides and fatty acid methyl esters. Temperatures of the solid–liquid equilibrium for the mixtures were measured by differential scanning calorimetry and visual observation, while the theoretical values were calculated using the modified Universal Quasi-chemical Functional-group Activity Coefficients (UNIFAC) model (Dortmund). The theoretical and experimental results were in good agreement, especially for binary mixtures of monoglycerides and methyl esters. The importance of monoglycerides on the cold-flow properties of biodiesel was determined, and the effects could be well described by the modified UNIFAC model (Dortmund).     

Incorporation of Dust Particles into a Growing Film During Silicon Dioxide Deposition from a TEOS/O2 Plasma

The effects of gas flow rate on particle formation and film deposition during the preparation of silica thin film using a TEOS/O₂ plasma were investigated. Particle formation and growth are suppressed with increasing gas flow rates. The film deposition rate increases with increasing gas flow rate, reaches a maximum value, and eventually decreases again. However, the uniformity of the film tends to degrade at high gas flow rates. At a high gas flow rate, some particles trapped in the sheath near the grounded electrode pass through the sheath to reach the substrate and are then embedded in the growing film. A self-consistent sheath model combined with particle force balance based on charge fluctuation was developed to explain these experimental findings qualitatively. The model reveals that charge fluctuation is a key factor for the particle to overcome the potential barrier of the negatively charged particles to pass through the sheath, eventually reaching the substrate. The model further shows that the probability of a particle being deposited on the substrate is higher for increased gas flow rates, which correctly predicts the experimentally observed trend.     

Homogeneous Tritylation of Cellulose in A Sulfur Dioxide – Diethylamine – Dimethyl Sulfoxide Medium

The present investigation was undertaken to see if a practical method could be developed for homogeneous tritylation of cellulose in a non-aqueous solvent of cellulose. Our new procedure of tritylation of cellulose can easily be carried out under homogeneous conditions by dissolving cellulose in a sulfur dioxide(SO₂)-diethylamine (DEA)-dimethyl sulfoxide(DMSO) solvent system, one or the non-aqueous cellulose solvents, followed by addition of trityl chloride and pyridine. This new method can avoid the time consuming pretreatment for the decrystallization of cellulose which has been necessary in the traditional procedure and can lower the reaction temperature. IR spectra of the products indicated the formation of trityl cellulose. Measurements of dielectric properties of the products confirmed that trityl groups were selectively introduced at the primary hydroxyl groups in cellulose. This conclusion was also confirmed by a H-NMR study in which the tritylated products was first acetylated, detritylated and then trideuterioacetylated and H-NMR spectra were taken at each stage and examined comparatively.