Fracture behavior of core‐shell rubber–modified clay‐epoxy nanocomposites

Morphology and fracture mechanisms in two nanoclay‐filled epoxy systems were investigated using both microscopy and spectroscopy tools. Clay exfoliation was achieved using a series of sample preparation steps, and confirmed using wide angle X‐ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. Significant improvement in modulus was obtained when clay exfoliation was achieved. Incorporation of core‐shell rubber (CSR) in both caly‐filled epoxy systems leads to greatly enhanced fracture toughness. Optical microscopy and TEM observations of the CSR‐modified nanocomposites suggest that CSR cavitation. shear yielding of the matrix, clay layer delamination. CSR bridging, crack bifurcation. and crack deflection are among the operative toughening mechanisms observed, depending on the nature of the epoxy matrix utilized.     

Enantio-differentiating hydrogenation of prochiral ketones over modified nickel

This article reviews the enantio-differentiating hydrogenation of prochiral ketones over a asymmetrically modified catalyst, focusing on the hydrogenation of simple prochiral alkanones. The parameters affecting catalytic activity and enantiodifferentiating ability are considerable in number, and each parameter should be optimized in order to attain a highperformance enantio-differentiating catalyst. Optimization of the parameters and the mode of enantio-differentiation are discussed and compared with the enantio-differentiating hydrogenation of β-ketoesters.     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

Template synthesis of novel porous carbons using various types of zeolites

As previously reported, high surface area microporous carbons with long-range order can be synthesized by using zeolite Y as a template. In this work, an attempt is made to synthesize porous carbon using several other types of zeolites (zeolite β, ZSM-5, mordenite and zeolite L). Special attention is paid to whether the structural regularity of each zeolite can be transferred to the carbon structure as well as with the case of zeolite Y. The carbon filling method was then examined to see which gives the highest regularity to the carbon structure. It has been found that the optimum carbon filling method for zeolite Y is not an optimum one for the other zeolites and the degree of the regularity of long-range ordering in the carbons strongly depends on zeolite type. The order of the regularity in the resultant carbons is zeolite β>>zeolite L>mordenite>ZSM-5. The effect of zeolite type on the regularity is discussed in relation to the size and the shape of the zeolite channels.     

Design of new catalysts for ecological high-quality transportation fuels by combinatorial computational chemistry and tight-binding quantum chemical molecular dynamics approaches

Recently, we introduced a concept of combinatorial chemistry to computational chemistry and proposed a new method called “combinatorial computational chemistry”, which enables us to perform a theoretical high-throughput screening of catalysts. In the present paper, we reviewed our recent application of our combinatorial computational chemistry approach to the design of new catalysts for high-quality transportation fuels. By using our combinatorial computational chemistry techniques, we succeeded to predict new catalysts for methanol synthesis and Fischer–Tropsch synthesis. Moreover, we have succeeded in the development of chemical reaction dynamics simulator based on our original tight-binding quantum chemical molecular dynamics method. This program realizes more than 5000 times acceleration compared to the regular first-principles molecular dynamics method. Electronic- and atomic-level information on the catalytic reaction dynamics at reaction temperatures significantly contributes the catalyst design and development. Hence, we also summarized our recent applications of the above quantum chemical molecular dynamics method to the clarification of the methanol synthesis dynamics in this review.     

Different support effect of M/ZrO2 and M/CeO2 (M = Pd and Pt) catalysts on CO adsorption: A periodic density functional study

CO adsorption over Pd₄ and Pt₄ cluster supported by c-ZrO₂(1 1 1) and CeO₂(1 1 1) catalyst systems was investigated using periodic density functional method in order to clarify the support effect on CO activation. We found that the support increases the CO activation for bridge and three-fold sites but decreases for the atop site. Moreover, it was found that the support changes the site preference for the CO adsorption. Bridge site on both the Pt₄/c-ZrO₂ and Pt₄/CeO₂ show larger CO adsorption energies than those on the other sites while the atop site is energetically preferable on isolated Pt₄ cluster. c-ZrO₂ supported Pd shows the largest CO activation with large charge transfer from the catalyst to the CO molecule. This reveals that ZrO₂ supported Pd can be a good catalyst for CO activation because of its higher probability to the three-fold site CO adsorption. We also found that positively charged M₄ clusters on the support keep their strong electron-donating properties and have enough charge density to contribute to the activation of an adsorbed CO molecule by a charge transfer.     

Fatigue behavior of medium-density polyethylene pipes

A round bar specimen and a square bar specimen cut out from medium-density polyethylene pipes with a notch were made and a fatigue test was conducted to cause a brittle fracture. The initiation and growth of a craze and crack at the tip of a notch was observed. In the range where loading cycles are few and displacement of the specimen does not increase, the craze prior to crack initiation occurs. Also, the effect of frequency was investigated. The pure creep failure and the fatigue failure at low frequency were compared. The lower the frequency, the smaller the reciprocal of the actual loading time T_f becomes. It is also found that this tensile fatigue test is a useful test method to assure the quality of pipes.     

Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

Free primary alcohols in oils and waxes from germs,kernels and other components of nuts,seeds, fruits and cereals

The composition of free primary alcohols in oils and waxes obtained from the germ, kernel, seed coat, shell and skin (peel) of various nuts, seeds, fruits and cereals and from the chrysalis of silkworm was examined. These alcohols are usually present in small amounts, along with large quantities of hydrocarbons, esters and glycerides in oils and waxes. Thus, it is necessary to remove hydrocarbons, esters and glycerides to analyze the alcohols. We found that preparative reverse-phase thin-layer chromatography (TLC) was the best way to isolate alcohols from oils and waxes. Gas liquid chromatography (GLC) then detected hexacosanol, octacosanol and triacontanol in the oils and waxes. Octacosanol usually was the predominant alcohol. Relationships between the organs from nuts, seeds, fruits and cereals and the contents of octacosanol are suggested. For example, degermed kernels contained two times more octacosanol than the germ, and the skin coat and shell contained one-half and one-fortieth the octacosanol of the germ, respectively.