Advanced Wireless Access System

The key words for the future telecommunications are personalization, multi-media services and high accessibility to the network. These trends naturally lead to radio media application to access links. In this sense, this paper proposes an advanced wireless access system with a capacity supporting broadband video and data services.Concept of the system can be defined as a new radiocommunication category with advantages of both fixed and mobile systems.The system is designed to transport ATM-based signals using SHF (or EHF) bands to wireless terminals, interconnected with optical fibers at the network side. The basic system configuration is presented as well as examples of system parameters.For radio aspects the maximum service coverages of the radio base stations are calculated based on availability consideration. Preferred frequency bands for actual operation are also discussed.     

Control of tone reproduction characteristics by time constant ofdevelopment roller in monocomponent development

The authors describe the relationship between the resistance of a development roller and the development characteristics of a monocomponent development system. To investigate this relationship the authors developed an electric field neutralization model by considering a virtual electrode determined by the time constant of a resistive layer on a development roller. From a simulation model and experimental results, the authors find that the tone reproduction curve for development γ is strongly dependent on the layer time constant. When the time constant is smaller than the development time, γ is determined by neutralization of the development electric field. When the time constant is larger than the development time, γ is determined by a counter charge left on the development roller after toner is deposited on the photoreceptor. It became possible to vary the tone curve over a wide range by the time constant of development roller in monocomponent development     

A biped walking robot capable of moving on a vertical wall

The use of a wall-climbing robot for purposes such as rescue, wall inspection and fire-fighting on high-rise buildings has been anticipated for a long time. Three different types of wall-climbing robots have been developed in Japan. The first one has a large area sucker, which has the reverse mechanism of a hovercraft. This type can be used only on flat and wide surfaces. The second one has crawlers to move on a vertical wall with many small suckers on them. The third one has a walking mechanism with small suckers on each foot. A biped walking model was built and tested on a vertical wall and a ceiling. The aerodynamic matching between blower performance and required forces of a sucker, as well as the control systems of the robot, are studied in detail.     

High-Speed TDM–WDM Techniques for Long-Haul Submarine Optical Amplifier Systems

Optical amplifier techniques have led to the installation of large-capacity submarine systems and further capacity increases seem likely. This paper reviews the FSA submarine system, which flexibly operates at both 2.5 and 10 Gb/s and offers maximum transmission capacity of 60 Gb/s for commercial use. The system configuration as well as its characteristics and upgradability will be introduced, including measurement results on time-division-multiplexing/wavelength-division-multiplexing (TDM–WDM) transmission at bit rates of 10 and 20 Gb/s using non-return-to-zero or soliton pulses. To further increase transmission capacity, TDM–WDM techniques that permit more than 10 Gb/s signal transmission in each data channel should be developed. Thus, pulse formats, which include non-return-to-zero, return-to-zero, or soliton pulses, and dispersion allocation in transmission fibers are significant issues. We introduce and discuss our recent results from high-speed (10 to 40 Gb/s) TDM–WDM signal transmission experiments with regard to the above aspects.     

Diametral compression tests of silicon carbide fibre-reinforced glass

Diametral compression tests were carried out for unidirectionally aligned silicon carbide fibrereinforced borosilicate glass. The fracture load dependence on the angle between the loading axis and the fibre alignment was investigated. The stress components in the fibre-aligned plane were calculated to evaluate the effect of the shear stress on fracture. Weibull statistics were employed to estimate the fracture load dependence on the fibre orientation angle. Assumingm = 5 to 10, the contribution of shear stress to the fracture of silicon carbide fibrereinforced glass was found to be negligible.     

Numerical analysis of waveguide bandpass filters using singular integral equations and construction of simple design formulas

A powerful numerical solution is presented for bandpass filters in rectangular waveguides. The filters are composed of cascading of perfectly conducting inductive obstacles with zero thickness: asymmetrical windows, symmetrical windows, or symmetrical strips. The problem is reduced to a set of singular integral equations, which is solved by an extension of Lewin's quasi‐static procedure. After the accuracy of the classical formulas for the equivalent reactance is investigated, the simple inverse formulas are constructed to yield proper window widths for desired equivalent parameters. Their effectiveness is demonstrated by designing practical filters having maximally flat or equal‐ripple characteristics. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(4): 17–25, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10251     

VSATS in Japan

In Japan, private domestic communications satellites, JCSAT and SuperBird, carrying K_u-band transponders, were launched in 1989, and the use of the VSATs started. To expedite a wider use of the VSAT systems, regulations were amended in June 1989 to permit simplified licensing procedures for the VSATs which conformed to technical standards. This contribution describes the usage of VSAT systems in Japan along with the licensing procedures and the technical standards.     

Determination of equivalent circuit constants of synchronous machines from the extended Dalton‐Cameron method

This paper presents a method of determining the equivalent circuit constants which accord with the physical construction of synchronous machines, using the dc decay testing method with the rotor in arbitrary position (proposed by the authors and called the extended Dalton–Cameron method). The conventional Dalton–Cameron method calculates the direct‐ and quadrature‐axis subtransient reactance from a standstill response test in any arbitrary rotor position using a single‐phase power supply. The extended Dalton–Cameron method determines the direct‐ and quadrature‐axis operational impedances for each slip from a standstill response test using a small‐capacity dc power supply. The direct‐ and quadrature‐axis operational impedance loci thus obtained synchronous machine constants (subtransient, transient, and synchronous reactances) are used to estimate the direct‐ and quadrature‐axis equivalent circuit constants which accord with the physical construction of synchronous machines. As an example, equivalent circuit constants are determined for a 10‐kW laminated salient‐pole‐type synchronous machine with damper winding. The validity of the equivalent circuit constants is confirmed by comparing the calculated resistance and leakage reactance of the field winding determined from the operational impedance when the terminals are short‐circuited, to those when the terminals are connected to an external resistance. © 2001 Scripta Technica, Electr Eng Jpn, 138(1): 56–67, 2002     

Experimental studies of bistatic scattering from two-dimensionalconducting random rough surfaces

Despite the recent development of analytical and numerical techniques for problems of scattering from two-dimensional rough surfaces, very few experimental studies were available for verification. The authors present the results of millimeter-wave experiments on scattering from two-dimensional conducting random rough surfaces with Gaussian surface roughness statistics. Machine-fabricated rough surfaces with controlled roughness statistics were examined. Special attention was paid to surfaces with large rms slopes (ranging from 0.35 to 1.00) for which enhanced backscattering is expected to take place. Experimentally, such enhancement was indeed observed in both the copolarized and cross-polarized returns. In addition, it was noticed that at moderate angles of incidence, the scattering profile as a function of observation angle is fairly independent of the incident polarization and operating frequency. This independence justifies the use of the geometric optics approximation embodied in the Kirchhoff formulation for surfaces with large surface radius of curvature. When compared with the experimental data, this analytical technique demonstrates good agreement with the experimental data