High-temperature formation phases and crystal structure of hot-pressed thermoelectric compounds with chalcopyrite-type structure

In this study, we introduced the temperaturedependent formation phases and crystallographic parameters of hot-pressed silver gallium telluride AgGaTe_2 and copper gallium telluride CuGaTe_2 with chalcopyrite structure from 300 to 800 K. These two compounds are potential thermoelectric materials in the intermediate temperature range; however, the temperature-dependent formation phases and crystallographic parameters of hotpressed samples have not yet been analyzed in detail. The crystal structure analysis based on synchrotron X-ray diffraction(SXRD) measurements clarifies that impurity phases such as Te and Ag_2 Te in the AgGaTe_2 matrix and Te and CuTe in the CuGaTe_2 matrix appear at some temperature regions above 300 K. The existence of such impurity phases could be correlated with the increases of the electrical resistivity and Seebeck coefficient of the samples after multiple measurement cycles of the temperature-dependent transport properties from 300 to 800 K.The tetragonal lattice parameters a and c, tetragonal lattice volume, thermal expansion coefficients, tetragonal distortion, anion displacement parameter, and isotropic displacement parameter of the hot-pressed AgGaTe_2 and CuGaTe_2 were also analyzed. These crystallographic parameters are expected to substantially affect the thermoelectric properties of AgGaTe_2 and CuGaTe_2. Our results provide prospect of the long-term high-temperature stability and clues of the detailed analysis on the transport properties of hot-pressed AgGaTe_2 and CuGaTe_2, which should aid their development for thermoelectric applications.     

Microzonation for Seismic Geotechnical Hazards and Actual Damage During the 2005 Fukuoka-Ken Seiho-Oki Earthquake

The 2005 Fukuoka-ken Seiho-oki earthquake caused damage to structures due to liquefaction, slope failure and strong shaking in Fukuoka City. One of the authors had conducted microzonation for liquefaction, slope failure and strong shaking about 17 years before the earthquake. After the earthquake, the authors compared the zoning map with the actual damage. The results showed that liquefied sites coincided fairly well with predicted zones in the reclaimed lands. However, they were slightly different in a big sand spit named Uminonakamichi. Failure occurred at several slopes inside the predicted areas, while damage to buildings occurred due to strong shaking along the Kego Fault. The damaged area was slightly different from the predicted area. Furthermore, a liquefaction analysis was conducted and the results of this analysis were compared with the results of microzonation in 1988. In this paper, the authors discuss the validity of microzonation based on this comparison.     

High-speed InGaP/GaAs transistors with a sidewall base contactstructure

We have fabricated InGaP/GaAs double heterojunction bipolar transistors with a sidewall base contact structure. These transistors operate in both emitter-up and emitter-down modes. Symmetric characteristics of the cutoff frequency f_T=68 GHz and the maximum oscillation frequency f_max=31 GHz were obtained at a base-collector bias V_BC of 0 V. For emitter-down operation, f _T was found to reach a maximum of 78 GHz when the base-collector junction was forward biased at 0.9 V. The product of f _T for emitter-down operation and f_T for emitter-up operation was 5.3×10³ GHz², which is about six times that of previously reported SiGe heterojunction bipolar transistors     

Evaluation of drug toxicity with hepatocytes cultured in a micro-space cell culture system

A micro-space cell culture system was recently developed in which cells such as hepatocytes can be cultured and formed into a multicellular three-dimensional (3D) architecture. In this study, we assessed the performance of HepG2 cells cultured in this micro-space cell culture system in a drug toxicity test, and evaluated the effects of micro-space culture on their hepatocyte-specific functions. The micro-space cell culture facilitated the formation of 3D HepG2 cell architecture. HepG2 cells cultured in a micro-space culture plate exhibited increased albumin secretion and enhanced mRNA expression levels of cytochrome P450 (CYP) enzyme compared to those cultured in a monolayer culture. When the cells were exposed to acetaminophen, a hepatotoxic drug, the damage to the HepG2 cells grown in micro-space culture was greater than the damage to the HepG2 cells grown in monolayer culture. In addition, human primary hepatocytes grown in micro-space culture also exhibited increased albumin secretion, enhanced CYP mRNA expression levels and increased sensitivity to acetaminophen compared to those grown in monolayer culture. These results suggest that this micro-space culture method enhances the hepatocyte-specific functions of hepatocytes, including drug-metabolizing enzyme activities, making hepatocytes grown in the micro-space culture system a useful tool for evaluating drug toxicity in vitro.     

A feasible core design of lead bismuth eutectic cooled CANDLE fast reactor

Among the innovative reactor concepts, CANDLE has several advantages over conventional reactor designs. However, when CANDLE is extended to long life, the clad integrity at high neutron fluence, the build-up of fission product gases, and the pressure drop for long cores pose technological challenges which have to be overcome. In this paper, we propose practically viable design procedures, such as recladding the entire fuel pins and replacement of different amounts of fuel at different radial positions, to ensure clad integrity and flat power distribution, respectively. We demonstrate the efficacy of such design procedures by calculations that are performed on a LBE CANDLE reactor. Our calculations show that for a reactor operation period of 3700 days the various reactor parameters are within the limits proposed by Japan Atomic Energy Agency (JAEA).     

First nuclear transmutation of 237Np and 241Am by accelerator-driven system at Kyoto University Critical Assembly

This study demonstrates, for the first time, the principle of nuclear transmutation of minor actinide (MA) by the accelerator-driven system (ADS) through the injection of high-energy neutrons into the subcritical core at the Kyoto University Critical Assembly. The main objective of the experiments is to confirm fission reactions of neptunium-237 (²³⁷Np) and americium-241 (²⁴¹Am), and capture reactions of ²³⁷Np. Subcritical irradiation of ²³⁷Np and ²⁴¹Am foils is conducted in a hard spectrum core with the use of the back-to-back fission chamber that obtains simultaneously two signals from specially installed test (²³⁷Np or ²⁴¹Am) and reference (uranium-235) foils. The first nuclear transmutation of ²³⁷Np and ²⁴¹Am by ADS soundly implemented by combining the subcritical core and the 100 MeV proton accelerator, and the use of a lead-bismuth target, is conclusively demonstrated through the experimental results of fission and capture reaction events.     

Characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol

In this study, we report the characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol. The characterization of carbonaceous films by electrodeposition was examined by means of Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), electron energy loss spectroscopy (EELS), secondary ion mass spectrometry (SIMS), atom probe (AP) and high resolution-elastic recoil detection analysis (HR-ERDA). From these results, it was found that the films deposited on the metal substrates were composed of the sp² and sp³ carbon contents, of which the ratio was about 7:3. Furthermore, the films by electrodeposition contained much hydrogen. The hydrogen contents in the surface were about 60 at.% and those in the subsurface were a few 10 at.%.     

Dynamic mechanical properties of three‐component composites (acrylic polymer/epoxy/SiO2) in the glass‐transition region

In previous studies, we reported the linear and nonlinear rheological properties of three‐component composites consisting of acrylic polymer (AP), epoxy resin (EP), and various SiO₂ contents (AP/EP/SiO₂) in the molten state. In this study, the dynamic mechanical properties of AP/EP/SiO₂ composites with different particle sizes (0.5 and 8 μm) were investigated in the glass‐transition region. The EP consisted of three kinds of EP components. The α relaxation due to the glass transition shifted to a higher temperature with an increase in the volume fraction (?) for the AP/EP/SiO₂ composites having a particle size of 0.5 μm, but the α relaxation scarcely shifted for the composite having a particle size of 8 μm as a general result. This result suggested that the SiO₂ nanoparticles that were 0.5 μm in size adsorbed a lot of the low‐glass‐transition‐temperature (T_g) component because of their large surface area. The AP/SiO₂ composites did not exhibit a shift in T_g; this indicated that the composite did not adsorb any component. The modulus in the glassy state (E′_g) exhibited a very weak &phis; dependence for the AP/EP/SiO₂ composites having particle sizes of 0.5 and 8 μm, although E′_g of the AP/SiO₂ composites increased with &phis;. The AP/EP/SiO₂ composites exhibited a peculiar dynamic mechanical behavior, although the AP/SiO₂ composites showed the behavior of general two‐component composites. Scanning electron microscopic observations indicated that some components in the EP were adsorbed on the surface of the SiO₂ particles. We concluded that the peculiar behavior of the AP/EP/SiO₂ composites was due to the selective adsorption of the EP component. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40409.     

Adaptive optics instrumentation in submillimeter/terahertz spectroscopy with a flexible polyvinylidene fluoride cladding hollow waveguide

A simple instrument has been developed to carry out temperature dependent submillimeter/terahertz-wave spectroscopy using a polyvinylidene fluoride flexible hollow waveguide and an eggplant-shape launching lens.