Optimization of rotor speed based on stretching,efficiency, and viscous heating in nonintermeshing internal batch mixer: Simulation and experimental verification

Optimization of rotor speed based on stretching, efficiency, and viscous heating in nonintermeshing internal batch mixer has been investigated using polymer melt. A practical optimization technique was followed for optimization. Four different rotor speeds were used and characterized numerically with viscous dissipation and stretching. The heat distribution between rotor edge and mixer wall was calculated. Stretching experienced by the fluid was analyzed and the result was verified experimentally using particle tracking method. Exponential increase of energy dissipation between the rotor edge and the barrel at higher speed highlighted the importance of choosing the thermal properties of the polymer to avoid thermal degradation. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

MICROFLORA CHANGES IN TUNA MINCE DURING CONVECTION AIR DRV1NG

Abstract

Microorganisms grow in tuna during drying at low temperatures. The drying temperature of 50°C or below is not lethal to the microflora. The decimal reduction time (D-value) varied from 12.66 to 2.63 hr when drying temperature increased from 60 to 100°C, respectively. These values can be used to estimate the lethal effect of drying on the natural microflora in tuna.     

Surface Modification in Polycrystalline Y2O3 Under High‐Pressure/High‐Temperature Processing Conditions

A pressure‐induced phase transformation is used to refine the grain size of polycrystalline Y₂O₃, by a factor of 3000. A surface modification effect accompanies the observed grain refinement, which becomes more apparent with increasing holding time under high pressure. The surface‐modified layer exhibits lower hardness and lower oxygen content relative to the underlying material. Moreover, it possesses columnar‐grained structure with cubic symmetry, whereas the interior has a monoclinic structure.     

Influence of post-curing temperature on the structure,properties, and adhesion of vinyl ester adhesive

Vinyl ester (VE) resins are widely used as thermoset adhesives in structural joints and composites, but complete curing under environmental conditions is not produced. The existing literature dealing with the effect of post-curing on the structure, viscoelastic, mechanical, and adhesion properties of VE resin is scarce. Therefore, in this study, VE resin was subjected to different post-curing temperatures (50–140 °C) for one hour, and the changes in structure and properties were assessed. The degree of cross-linking of the VE resin depended on the post-curing temperature and cure started to be completed above 100 °C, a temperature close to the glass transition temperature (115 °C) of the completely cross-linked polymer. Furthermore, gel formation in VE resin was evidenced for post-curing temperature below 100 °C. In order to fully cross-link the VE resin, post-curing at 140 °C for one hour was necessary, and it was evidenced by an increase in the glass transition temperature and in the mechanical properties; an increase in adhesion to cold rolled steel was obtained although the shear strength was lower than in the joint produced with the non-post-cured VE resin.     

Potentiometric and thermodynamic studies of vinylacetic acid and its metal complexes in monomeric and polymeric forms

Proton–monomeric ligand dissociation and metal–monomeric ligand stability constants of vinylacetic acid (VA) with some metal ions were calculated potentiometrically in 0.1M KCl. Also, in the presence of 2,2′‐azobisisobutyronitrile as initiator, the proton–polymeric ligand dissociation and metal–polymeric ligand stability constants were calculated. The effect of temperature on the dissociation of VA and the stability of its formed complexes were studied in monomeric and polymeric forms. The corresponding thermodynamic functions were derived and discussed. The dissociation process was nonspontaneous, endothermic, and entropically unfavorable. The formation of the metal complexes was found to be spontaneous, endothermic, and entropically favorable. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 952–956, 2005     

An evolution-based analysis scheme to identify CO2/O2 specificity-determining factors for ribulose 1,5-bisphosphate carboxylase/oxygenase

Ribulose 1,5-bisphosphate carboxylase/oxygenase (RuBisCo) catalyzes a rate-limiting step in photosynthetic carbon assimilation (reacting with CO2) and its competitive photo-respiratory carbon oxidation (reacting with O2). RuBisCo enzyme with an enhanced CO2/O2 specificity would boost the ability to make great progress in agricultural production and environmental management. RuBisCos in marine non-green algae, resulting from an earlier endo-symbiotic event, diverge greatly from those in green plants and cyanobacteria and, further, have the highest CO2/O2 specificity whereas RuBisCos in cyanobacteria have the lowest. We assumed that there exist different levels of CO2/O2 specificity-determining factors, corresponding to different evolutionary events and specificity levels. Based on this assumption, we devised a scheme to identify these substrate-determining factors. From this analysis, we are able to discover different categories of the CO2/O2 specificity-determining factors that show which residue substitutions account for (relatively) small specificity changes, as happened in green plants, or a tremendous enhancement, as observed in marine non-green algae. Therefore, the analysis can improve our understanding of molecular mechanisms in the substrate specificity development and prioritize candidate specificity-determining surface residues for site-directed mutagenesis.     

Development of a semi-quantitative food frequency questionnaire for use in United Arab Emirates and Kuwait based on local foods

Background  

The Food Frequency Questionnaire (FFQ) is one of the most commonly used tools in epidemiologic studies to assess long-term nutritional exposure. The purpose of this study is to describe the development of a culture specific FFQ for Arab populations in the United Arab Emirates (UAE) and Kuwait.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

Prodynorphin and Proenkephalin in Cerebrospinal Fluid of Sporadic Creutzfeldt–Jakob Disease

Proenkephalin (PENK) and prodynorphin (PDYN) are endogenous opioid peptides mainly produced in the striatum and, to a lesser extent, in the cerebral cortex. Dysregulated metabolism and altered cerebrospinal fluid (CSF) levels of PENK and PDYN have been described in several neurodegenerative diseases. However, no study to date investigated these peptides in the CSF of sporadic Creutzfeldt–Jakob disease (sCJD). Using liquid chromatography-multiple reaction monitoring mass spectrometry, we evaluated the CSF PDYN- and PENK-derived peptide levels in 25 controls and 63 patients with sCJD belonging to the most prevalent molecular subtypes (MM(V)1, VV2 and MV2K). One of the PENK-derived peptides was significantly decreased in each sCJD subtype compared to the controls without a difference among subtypes. Conversely, PDYN-derived peptides were selectively decreased in the CSF of sCJD MV2K, a subtype with a more widespread overall pathology compared to the sCJD MM(V)1 and the VV2 subtypes, which we confirmed by semiquantitative analysis of cortical and striatal neuronal loss and astrocytosis. In sCJD CSF PENK and PDYN were associated with CSF biomarkers of neurodegeneration but not with clinical variables and showed a poor diagnostic performance. CSF PDYN and PENK-derived peptides had no significant diagnostic and prognostic values in sCJD; however, the distinct marker levels between molecular subtypes might help to better understand the basis of phenotypic heterogeneity determined by divergent neuronal targeting.     

Modified poly(caprolactone trifumarate) with embedded gelatin microparticles as a functional scaffold for bone tissue engineering

Bone tissue engineering offers high hopes in reconstructing bone defects that result from trauma, infection, tumors, and other conditions. However, there remains a need for novel scaffold materials that can effectively stimulate ossification with appropriate functional properties. Therefore, a novel injectable, biodegradable, and biocompatible scaffold made by incorporating modified poly(caprolactone trifumarate) (PCLTF) with embedded gelatin microparticles (GMPs) as porogen is developed. Specifically, in vitro and in vivo tests were carried out. For the latter, to determine the osteogenic ability of PCLTF‐GMPs scaffolds, and to characterize bone‐formation, these scaffolds were implanted into critical‐sized defects of New Zealand white rabbit craniums. Field Emission Scanning Electron Microscope (FESEM) demonstrated cells of varying shapes attached to the scaffold surface in vitro. The PCLTF‐GMPs demonstrated improved biocompatibility in vivo. Polyfluorochrome tracers detected bone growth occurring in the PCLTF‐GMPs filled defects. By incorporating PCLTF with GMPs, we have fabricated a promising self‐crosslinkable biocompatible and osteoconducive scaffold for bone tissue engineering. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43711.