Empirical efficiency and volume relationships for HPGe detectors

We have extended the empirical work of Vano et al.[1] relating the slope of the detector efficiency curve to the active volume for Ge detectors. The analysis was carried out using Monte Carlo techniques and covered a wide range of incident energies (200 keV-20 MeV) and active volumes (19.6 cm³–396 cm³). It is shown that the expression of Vano et al.[1] is only valid over the energy range 200 keV-3 MeV for active volumes <50 cm³. The upper bound decreases to 2 MeV for volumes of a few hundred cm³. The usable energy range can, however, be extended to 6 MeV by introducing higher order terms into the polynomial. Above this energy, the shape of the efficiency curve is better described by a non-linear function since linear forms fail simultaneously to fit large active volumes and high energies. We therefore propose a composite function which reduces to the form given in Vano et al. in the low energy/active volume limit. By comparison with the Monte Carlo results, it is estimated that relative efficiencies can be calculated to within 6% over the energy range 200 keV-20 MeV and active volumes 20 cm³–400 cm³. Since the largest errors occur for the smallest volumes, we recommend that for energies <3 MeV a two-fold approach be followed, i.e. using the expression of Vano et al.[1] for active volumes less than 50 cm³ and the proposed non-linear form for larger volumes. For high energy work (E > 3 MeV), we advocate the non-linear form. In this way, average errors can be kept 3%. Finally, we point out that the real power of the expression of Vano et al. lies not in predicting efficiencies, but active volumes.     

Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

Dimensional scaling for impact cratering and perforation

The issue of generic scaling laws able to adequately predict (within better than 20%) cratering in semi-infinite targets and perforations through finite thickness targets was revisited. The approach used was to apply physical logic for hydrodynamics in a consistent manner able to account for chunky-body impacts such that the only variables needed are those directly related to known material properties for both the impactor and target. The analyses were compared and verified versus CTH hydrodynamic code calculations and existing experimental data. Comparisons with previous scaling laws were also performed to identify which (if any) were good for generic purposes. This paper is a short synopsis of the full report [1] available through the NASA Langley Research Center, LDEF Science Office.     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

The relative effects of transection of the gustatory branches of the seventh and ninth cranial nerves on NaCl taste detection in rats.

Chorda tympani nerve (CT) transection in rats severely impairs NaCl taste detection. These rats can detect higher concentrations of NaCl, however, suggesting that remaining oral nerves maintain some salt sensibility. Rats were tested in a gustometer with a 2-response operant taste-detection task before and after sham surgery (n = 5), combined transection of the CT and the greater superficial petrosal nerves (GSP; 7x, n = 6), or transection of the glossopharyngeal nerve (GL; 9x, n = 4). Thresholds did not significantly change after sham surgery. Although the GL responds to NaCl and innervates nearly 60% of total taste buds, 9x surgery had no effect. However, 7x surgery increased NaCl detection threshold by ～2.5 log?? units, greater than that reported for CT transection alone. These results suggest that the GSP contributes to NaCl sensitivity in rats and also demonstrate that the GL and perhaps the superior laryngeal and lingual nerve proper can maintain some NaCl detectability at high concentrations. These findings confirm the primacy of the 7th nerve relative to the 9th nerve in sensibility of NaCl in the rat model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the Auditory Modality Superiority Effect in Serial Recall: Separating Input and Output Factors.

The modality effect in immediate recall refers to superior recall of the last few items within lists presented in spoken as opposed to printed form. The locus of this well-known effect has been unclear. N. Cowan, J. S. Saults, E. M. Elliott, and M. Moreno (2002) introduced a new method to distinguish between the effects of input serial position, output serial position, and the number of items yet to be recalled and found that large modality effects occurred only in conditions in which delay and interference at output (from items already recalled) was high. The authors replicated that finding, even when the response period included output interference acoustically similar to the spoken stimuli to be recalled. However, the authors found that output delay and interference act only by lowering the level of performance to a more sensitive range. The modality effect thus originates during encoding of the list to be recalled, not during output. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Gender moderates the relationship between testosterone and marital interaction.

Higher testosterone levels are related to assertiveness and dominance. Given the relevance of those behavioral correlates to spouses' daily transactions, links between testosterone levels and marital interaction were explored among 92 newlywed couples. Marital problem-solving and social support transactions were assessed, and saliva was collected and assayed for testosterone. Whether marital behavior was related to husbands' and wives' testosterone levels was examined. The link between spouses' testosterone and their behavior was contingent on the partner's testosterone levels. Husbands exhibited more adaptive problem-solving behaviors and social support provision when husbands and wives were concordant for lower testosterone levels. In contrast, wives exhibited more adaptive support provision when spouses had discordant testosterone levels such that wives had higher levels and husbands had lower levels. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Aspects of three-dimensional constrained Delaunay meshing

Presented in this paper are the theoretical aspects of node addition to a non-convex, multiboundary mesh of tetrahedral elements as used in finite element modelling. The method used is derived from Watson¹ and Shenton and Cendes² and is extended to deal with node addition on inter-material boundaries. Several situations are identified that result in an illegal insertion polyhedron (IP), these could be caused by the ‘constrained’ nature of the mesh, adjacent objects with different material properties, or degenerate node configurations. A new Delaunay algorithm is described that checks for illegal cases of the IP and then corrects them, this checking relies on the consistent ordering of the element nodes. It is shown that a particular type of illegal IP can easily be identified and corrected using this technique. The Delaunay algorithm is then applied to automatic mesh generation, and modification to the basic Delaunay algorithm is described so that previously meshed edges and faces of the current object being meshed are not deleted during the addition of subsequent nodes. This ‘protection’ method only becomes viable by recognizing the node ordering sense of the IP faces.     

Dimensions of perfectionism, daily stress, and depression: A test of the specific vulnerability hypothesis.

Tested whether perfectionism dimensions interact with specific stressors to predict depression. A depressed patient sample (N?=?51) and a general psychiatric sample (N?=?94) completed measures of perfectionism, hassles, and depression. Ss in Sample 2 also completed other personality measures to assess the amount of unique variance in depression. Partial support was obtained: In both samples, self-oriented perfectionism interacted only with achievement stressors to predict depression. Socially prescribed perfectionism interacted with interpersonal stress in Sample 1 and with achievement stress in Sample 2 to predict depression. Several personality variables, including socially prescribed perfectionism, accounted for unique variance in depression. The results suggest that perfectionism dimensions are associated with depression and may constitute specific vulnerability factors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)