AN EXPERIMENTAL-NUMERICAL METHOD FOR MEASURING CRACK PROPAGATING VELOCITIES UNDER STRESS WAVE LOADING

An experimental-numerical method for measuring dynamic crack propagating velocities under stress wave loading is established in this paper. The experiments of the three-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point, dynamic load and instantaneous crack length are measured, then crack propagating velocities are calculated. Experiments on 40Cr steel show that the results given by this method have a good agreement with that obtained by the resistance fracture gage method. Therefore this method is feasible for measuring crack propagating velocities under high loading rate and will have wide application.     

Phase diagram and electrical behavior of silicon-rich iridium silicide compounds

The iridium-silicon phase diagram on the silicon-rich side was investigated by means of X-ray powder diffraction, density, differential thermal analysis (DTA), metallography, microprobe analysis, and electrical resistivity. Attempts were made to prepare eight previously reported silicon-rich iridium silicide compounds by arc melting and Bridgman-like growth. However, microprobe analysis identified only five distinct compositions: IrSi, Ir₄Si₅, Ir₃Si₄, Ir₃Si₅ and IrSi_≈3. The existence of Ir₂Si₃, Ir₄Si₇, and IrSi₂ could not be confirmed in this study. DTA in conjunction with X-ray powder diffraction confirm polymorphism in IrSi_≈3, determined to have orthorhombic and monoclinic unit cells in the high and low temperature forms. A eutectic composition alloy of 80.5 ± 1 at.% Si was observed between IrSi_≈3 and silicon. Both Ir₄Si₅ and Ir₃Si₄ exhibit distinct metallic behavior while Ir₃Si₅ is semiconducting. IrSi and IrSi_≈3 exhibit nearly temperature-independent electrical resistivities on the order of (5–10) × 10⁻⁶ ω m.     

In Situ Investigation of TCP Phase Formation,Stress Relaxation and γ/γ′ Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction

Metallurgical and Materials Transactions A - In nickel-based superalloys, the lattice misfit between the γ and γ′ phases and the propensity to TCP phase formation at service...     

Development of Cr and Al Pack Cementation Coatings on Co-Based γ/γ′ Superalloys

Metallurgical and Materials Transactions A - Co-based superalloys have been developed as candidate materials to replace Ni-based superalloys in hot sections of turbine engines, however, their...     

A Heat Treatment to Produce a Coarse-α-Particle Size in Ti–6Al–4V

Metallurgical and Materials Transactions A - A heat-treatment method to develop a coarse-α-particle size in Ti–6Al–4V with a fully-globular (equiaxed) microstructure was developed....     

The Fe-Ni (iron-nickel) system

The online version of the original article can be found at     

The assessment of thermal history in pressure vessel steel

A component of the present work involves attempts to simulate the microstructures of 1Cr-0.5Mo steel sample removed from service after extended exposure to elevated temperatures (10⁵ h at 535°C). The aim is to establish a basis for assessing the thermal history of service components and service weldments. Previous work has established that it is not possible to adequately simulate service microstructures using accelerated isothermal heat treatments alone. A selective mechanical testing program at elevated temperature has thus been investigated to superimpose the effect of stress on heat treatment. Qualitative comparison within each of these sets of micrographs suggests that the intraferritic precipitation in the creep samples is in each case refined and of a higher density compared to the sample subjected to isothermal heat treatments. It has been suggested that a comparison of the composition of the pearlitic M₃C in creep test samples with the empirical relationship may provide a means of assessing the average thermal history of the ex-service sample.     

The inhibitive effect of extraneous ion addition on stress corrosion cracking of alpha-brass

The addition of ammonium chloride, cobalt sulphate, cesium sulphate and ethylene diamine to a Mattsson solution and the addition of ammonium sulphate to the Pugh solution have been found to produce an inhibitive effect on the stress corrosion cracking of alpha-brass in these solutions. Ammonium chloride and ammonium sulphate additions affect the tarnish formation on the specimen as well as the cracking pattern. Electrochemical polarization studies have also been carried out with these two additives. The observations have been explained in the light of adsorption of these ionic species at selected sites on the metal surface and their possible interference with the cathodic reactions.     

Corrosion of metals and alloys in mixed gas environments at elevated temperatures

The attack of nickel, cobalt, iron, and alloys of these metals containing chromium and aluminum, by gases containing sulfur-oxygen, carbon-oxygen, and nitrogen-oxygen has been studied at temperatures of 600 and 900°C. The degradation of these metals and alloys was characterized by using standard analytical techniques with emphasis on optical metallography. Three types of accelerated degradation were identified for the attack of alloys by gases containing another oxidant in addition to oxygen. One type of degradation occurred because of the formation of reaction products composed of mixtures of phases involving both of the oxidants. Another type resulted from the reaction of second oxidant phases with oxygen. The third form of degradation involved the development of less protective phases due to thermodynamic instabilities. Thermodynamic stability diagrams are used to help account for the effects produced by different elements in the alloys.