Application of a spectroscopic method to estimate the olive oil oxidative status

A rapid Fourier transformed infrared (FTIR) attenuated total reflectance (ATR) spectroscopic method coupled with partial least squares (PLS), was developed to estimate the oxidation degree of extra virgin olive oil (EVOO). The reference values of EVOO oxidation for the FTIR calibration were obtained by the specific absorptions at 232 and 270 nm, due to the presence of conjugated diene (CD) and conjugated triene (CT) groups, as monitored by the UV spectrophotometric determination. Specific washing procedures were applied to the EVOO to obtain EVOOP and EVOOTP samples, without phenolic compounds and without tocopherols and phenols, respectively. To obtain different oxidation degrees covering wide CD and CT ranges, EVOO, EVOOP, and EVOOTP samples were subjected to a forced oxidation at 60°C for 20 days and aliquots of the oils were daily analyzed. Regression of the FTIR/PLS‐predicted CD and CT of individual oxidized oils EVOO, EVOOP, EVOOTP, and all combined oils (EVOOALL) against UV–Visible reference values demonstrated the good quality of the models in terms of R² and RMSECV values. The results of the study indicated that a strong correlation existed between FTIR and UV–Visible peak intensities. Practical applications: The FTIR‐ATR method coupled with PLS elaboration was developed and applied to predict the oxidation degree of EVOO samples with considerable advantages in terms of simplicity, analysis time, and solvent consumption as compared to the standard method. Moreover, suitable adjustments of the equipment could permit a rapid control at‐line in oil sector.     

Evaluation of Time-Temperature Parameter Effects on the Structural Characteristics of Films Obtained by Aqueous Polymeric Dispersions

Pellet cores, containing d-indobufen as the active principle, were prepared by the extrusion-spheronization process and coated with an aqueous polymeric dispersion using Wurster bottom-spray equipment. The present study investigated factors affecting the film properties, such as the product temperature during the coating process and the effects of the thermal postcoating treatment (curing phase), carried out in different drying conditions. The experimental results, in terms of drug release control, confirm that the properties of the film coating depend on the substrate temperature, which directly influences the coalescence process of the polymeric dispersion. Moreover, along with time and temperature of the drying phase, the type of equipment used affects the performance of the film coating dosage form. In particular, using the fluidized bed at a high temperature for a short time produced a film coating structure that seemed to remain unchanged after storage.     

Phenolic content and antioxidant capacity versus consumer acceptance of soaked and vacuum impregnated frozen nectarines

Nectarines (Prunus persica L. cv. Maria Laura) were manually selected, cut in slices and divided into four groups: fresh, untreated frozen, soaked in osmotic solution and subsequently frozen, and vacuum impregnated (VI) and subsequently frozen. This investigation was focused on evaluation of consumer acceptance with respect to treated versus untreated frozen nectarine slices. In a preliminary acceptance test of untreated frozen nectarine slices, fruits were generally rejected on the basis of a darkened appearance and “oxidized” taste. These negative attributes were probably linked to the activity of polyphenol oxidase (PPO) and depletion of phenols due to cell rupture during freeze–thaw procedures. For these reasons, in order to evaluate the tendency of fruit to oxidation, several analyses were performed: the antioxidant capacity of phenolic fraction and the o-diphenol content were estimated by spectrophotometric assays, whereas the hydroxycinnamic acid (chlorogenic and neochlorogenic acids) composition was evaluated by high performance liquid chromatography (HPLC). Phenolic content and antioxidant capacity were found to correlate well with the acceptance level of frozen nectarine slices. In this regard a higher phenolic content associated with a higher acceptance level of nectarine samples.     

Dynamic cardiomyoplasty: clinical follow-up at 12 years

OBJECTIVE: The purpose of this study is to evaluate the long-term outcome of dynamic cardiomyoplasty. This surgical technique was conceived to assist the failing heart. The many proposed mechanisms of action of cardiomyoplasty are: (1) systolic assist; (2) limitation of ventricular dilation; (3) reduction of ventricular wall stress (sparing effect); (4) ventricular remodeling with an active girdling effect; (5) angiogenesis; and (6) a neurohumoral effect. METHODS: We investigated 95 patients in our hospital undergoing this procedure due to severe chronic heart failure, refractory to optimal medical treatment. Patients had a mean age of 51 +/- 12 years. The etiology of heart failure was ischemic 55%, idiopathic 34%, ventricular tumor 6%, and other 5%. The mean follow-up was 44 months. RESULTS: The mean New York Heart Association (NYHA) functional class improved postoperatively from 3.2 to 1.8. Average radioisotopic left ventricular (LV) ejection fraction increased from 17 +/- 5 to 27 +/- 4% (P < 0.05). Stroke volume index increased from 32 +/- 7 to 43 +/- 8 ml/beat per m2 (P < 0.05). The heart size remained stable over the long term. Following cardiomyoplasty, the number of hospitalizations due to congestive heart failure was reduced to 0.4 hospitalizations/patient per year (preoperative: 2.5, P < 0.05). Computed tomography scans showed at long term a preserved latissimus dorsi muscle structure in 84% of patients. Survival probability at 7 years is 54%. Six patients underwent heart transplant after cardiomyoplasty (mean delay: 25 months), due to the natural evolution of their underlying heart disease. There were no specific technical difficulties. CONCLUSIONS: Clinically, this procedure reverses heart failure, improves functional class and ameliorates quality of life. The latissimus dorsi muscle histological structure is maintained at long-term, when postoperative electrostimulation is performed, avoiding excessive stimulation. Cardiomyoplasty may delay or prevent the progression of heart failure and the indication of cardiac transplantation.     

Effect of colloidal silica on the mechanical properties of fiber–cement reinforced with cellulosic fibers

The effect of colloidal silica on the hydration reaction of the Portland cement system and its effect on the resulting mechanical properties are not completely understood. Silica nanoparticles can affect the behavior and performance of fiber–cement, such as the calcium–silicate–hydrate gel of the matrix and the fiber–matrix interface bonding. The main objective of this study is to evaluate the effects of various contents of colloidal silica (0, 1.5, 3, 5, and 10 % w/w) on the microstructure and mechanical performance of cement composites reinforced with cellulosic pulp. Fiber–cement composites with unbleached eucalyptus Kraft pulp as the micro-fiber reinforcement were produced by the slurry dewatering technique followed by pressing. The average values of the modulus of rupture of the fiber–cement decreased with increasing colloidal silica content. However, the pullout of the fibers increased significantly in the fiber–cement composites with additions between 3 and 10 % w/w of colloidal silica suspension, as indicated in the scanning electron microscopy images and by the improvement in the energy of fracture values.     

Effects of High Pressure Treatments on Polymeric Films for Flexible Food Packaging

Effects of high pressure (HP) treatments on functional and morphological properties of commercial packaging films have been investigated, to assess their suitability for use in these processes. Experimental analyses have been performed on packaging films, used to make pouches containing four different types of food simulants, after HP pasteurization and sterilization treatments at 200, 500 and 700 MPa. The investigated polymeric flexible packaging structures were single layer as well as bilayer films. Effects of treatments on structural/morphological properties (i.e. crystallinity and density) and on thermodynamic and barrier properties were addressed. Quite all the investigated films were found to be suitable for HP pasteurization, which only determined a negligible effect on the glass transition temperatures and on density of the amorphous regions of some polymeric materials, without a significant effect on functional properties of the packaging. Only bilayer structures including metalized polyethyleneterephthalate were not able to withstand processing conditions because of an extensive delamination accompanied by loss of metallization layer. Conversely, in the case of HP sterilization, combined effects of HP and relatively high temperature caused significant modifications in some of the packaging materials, even those not including a metalized film. In particular, localized delamination occurred in the case of bilayer structures made by laminating polyethyleneterephtalate with linear low density polyethylene or with polypropylene. Films obtained by laminating cast polyamide and bioriented polyamide with polypropylene displayed no evidence of delamination. In the case of films not displaying delamination, only limited changes in gas and vapour barrier properties were detected. Copyright © 2014 John Wiley & Sons, Ltd.     

Hybrid Organic/Inorganic Nanostructures for Highly Sensitive Photoelectrochemical Detection of Dissolved Oxygen in Aqueous Media

Precise, reliable, and remote measurement of dissolved oxygen in aqueous media is of great importance for many industrial, environmental, and biological applications. In particular, photoelectrochemical sensors working in differential mode have recently demonstrated promising properties, in terms of stability, sensitivity, and application potential. Here, a new approach is presented, combining visible light sensitivity, efficient photocurrent generation, and solution‐processed fabrication methods of conjugated polymers, with charge carriers selectivity, energetic alignment favorable to efficient interfacial charge transfer and high surface area achievable by using metal oxide nanostructures. Extensive characterization and optimization of the hybrid organic/inorganic system are carried out, leading to the realization of an oxygen sensor device, based on nanostructured palladium oxide/poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole]/[6,6]phenyl‐C61‐butyric acid methyl ester (PdO/APFO‐3:PCBM) as materials of choice. State‐of‐the‐art sensitivity, amounting at ?5.87 μA cm^?2 ppm^?1, low background signal, in the order of ?4.85 μA cm^?2, good electrochemical stability for more than 2 h of continuous functioning and high reproducibility of the signal over the pH 1 to 10 range, are reported, making the hybrid device suitable for several practical uses. The results fully validate the mixed organic/inorganic approach for photoelectrochemical applications, and pave the way for its further exploitation in fields like waste water treatment, environmental monitoring, and water splitting.