Strongly Photosensitive and Fluorescent F8T2 Electrospun Fibers

Electrospun fibers of poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐co‐bithiophene] (F8T2) with exceptional electro‐optical performance are obtained. The I/T characteristics measured in fibers with 7–15 µm diameter and 1 mm length show a semiconductor behavior; their thermal activation energy is 0.5 eV and the dark conductivity at RT is 5 × 10^?9 (Ω cm)^?1. Besides exhibiting a photosensitivity of about 60 under white light illumination with a light power intensity of 25 mW · cm^?2, the fibers also attain RT photoluminescence in the cyan, yellow, and red wavelength range under ultraviolet, blue, and green light excitation, respectively. Optical microscope images of F8T2 reveal homogeneous electrospun fibers, which are in good agreement with the uniformly radial fluorescence observed.

     

A simple but sound approach for processing crystal growth kinetic data

The effects of common data smoothing techniques, on the estimating of the kinetic and thermodynamic parameters of the crystal growth process, were discussed in the light of birth and spread model. Adoption of the moving average, and filtration caused a noticeable misunderstanding of the real ruling growth mechanism, especially, during the early period of the crystal growth.In this work, a MATLAB routine was developed with standard, and reliable method to treat the prolonged concentration-time data sets, as obtained from continuous recording of refractometric °Brix readings of pure sucrose solutions in laboratory batch crystallization process. The method consists of finding the median of the residence time for every °Brix concentration, with and without interference of previous and post readings. In addition to 30% reduction in the evaluated interfacial free energies, up to 5-folds of increase in the estimates of the overall kinetic coefficients were reported using the common smoothing techniques instead of the proposed routine.     

Colloidal synthesis of Au nanoparticles using polyelectrolytes with 1,3,4-thiadiazole as reducing agents

Heterocyclic compounds are well known for their biological activity and coordination properties. Some heterocyclic compounds have been employed in the stabilization against coalescence of metallic nanoparticles in colloidal solutions, for example, tetrazole, triazole, and pyrazole. The aim of this work is to design new polyelectrolytes with heterocyclic pendant groups useful as reducing agents of Au³⁺ and as stabilizing agents for the synthesis of colloidal Au nanoparticles. Thus, polyelectrolytes with thiosemicarbazone and 1,3,4-thiadiazole pendant groups were used as reducing agents of Au³⁺ ions and stabilizing agents of Au nanoparticles. The voltammetry study of the polyelectrolytes showed that one with thiosemicarbazone pendant groups is the better reducing agent than polyelectrolytes with heterocyclic pendant groups. The polyelectrolytes can control the growth of the nanoparticles, obtaining structures with an average size of 9 nm. In this study, it was concluded that the nature of the heterocyclic group does not have an effect on the shape of nanoparticles and quasi-spherical nanoparticles were obtained with all polyelectrolytes. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47790.     

Enhancements in sugar immobilization in polymeric macroporous matrices for affinity capture

The use of macroporous monolithic matrices in the purification of biocompounds is constantly growing and developing. In this work, the objective was to optimize the quantity of N-acetyl-D-glucosamine (D-GlcNAc) immobilized on the surface of macroporous polymeric cryogels for capture of lectins from less clarified solutions. Surface response methodology was applied and it was observed that the immobilization temperature of the glutaraldehyde (GLU) and the D-GlcNAc concentration influenced the amount of sugar immobilized. The matrices produced with 1.1% of allyl glycidyl ether were functionalized by GLU. Optimal maximum condition was obtained with mean value of 160.39 ± 26.38 mg of D-GlcNAc immobilized per gram of dry cryogel. Characterization analyses of the matrices showed that the activation process was effective, maintaining the macroporous structure and physical characteristics. The adsorbents produced were tested for capture of lectins from a crude protein solution of barley. At tested conditions, adsorbent capture around 11% of protein in solution but reduce the hemaglutinating capacity in 40%, demonstrating its selectivity. The cryogels functionalized with D-GlcNAc present potential for use in capture compounds by affinity with carbohydrates, such as lectins. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47956.     

Measurement of enzymatic activity and specificity of human and avian influenza neuraminidases from whole virus by glycoarray and MALDI-TOF mass spectrometry

Influenza neuraminidases hydrolyze the ketosidic linkage between N-acetylneuraminic acid and its adjacent galactose residue in sialosides. This enzyme is a tetrameric protein that plays a critical role in the release of progeny virions. Several methods have been described for the determination of neuraminidase activity, usually based on colorimetric, fluorescent, or chemiluminescent detection. However, only a few of these tests allow discrimination of the sialyl-linkage specificity (i.e., α2-3- versus α2-6-linked sialyllactosides) of the neuraminidase. Herein we report a glycoarray-based assay and a MALDI-TOF study for assessing the activity and specificity of two influenza neuraminidases on whole viruses. The human A(H3N2) and avian A(H5N2) neuraminidase activities were investigated. The results from both approaches demonstrated that α2-3 sialyllactoside was a better substrate than α2-6 sialyllactoside for both viruses and that H5N2 virus had a lower hydrolytic activity than H3N2.     

Asymmetric synthesis and conformational analysis by NMR spectroscopy and MD of Aba- and α-MeAba-containing dermorphin analogues

Dermorphin analogues, containing a (S)‐ and (R)‐4‐amino‐1,2,4,5‐tetrahydro‐2‐benzazepin‐3‐one scaffold (Aba) and the α‐methylated analogues as conformationally constrained phenylalanines, were prepared. Asymmetric phase‐transfer catalysis was unable to provide the (S)‐α‐Me‐o‐cyanophenylalanine precursor for (S)‐α‐MeAba in acceptable enantiomeric purity. However, by using a Schöllkopf chiral auxiliary, this intermediate was obtained in 88 % ee. [(S)‐Aba 3‐Gly 4]dermorphin retained μ‐opioid affinity but displayed an increased δ‐affinity. The corresponding R epimer was considerably less potent. In contrast, the [(R)‐α‐MeAba 3‐Gly 4]dermorphin isomer was more potent than its S epimer. Tar‐MD simulations of both non‐methylated [Aba 3‐Gly 4]dermorphin analogues showed a degree of folding at the C‐terminal residues toward the N terminus of the peptide, without however, adopting a stabilized β‐turn conformation. The α‐methylated analogues, on the other hand, exhibited a type I/I′ β‐turn conformation over the α‐MeAba 3 and Gly 4 residues, which was stabilized by a hydrogen bond involving Tyr 5‐H_N and D ‐Ala 2‐CO.     

Synthesis and Evaluation of the Anticancer and Trypanocidal Activities of Boronic Tyrphostins

Molecules containing an (cyanovinyl)arene moiety are known as tyrphostins because of their ability to inhibit proteins from the tyrosine kinase family, an interesting target for the development of anticancer and trypanocidal drugs. In the present work, (E)‐(cyanovinyl)benzeneboronic acids were synthesized by Knoevenagel condensations without the use of any catalysts in water through a simple protocol that completely avoided the use of organic solvents in the synthesis and workup process. The in vitro anticancer and trypanocidal activities of the synthesized boronic acids were also evaluated, and it was discovered that the introduction of the boronic acid functionality improved the activity of the boronic tyrphostins. In silico target fishing with the use of a chemogenomic approach suggested that tyrosine‐phosphorylation‐regulated kinase 1a (DYRK1A) was a potential target for some of the designed compounds.     

Ionic conductivities and high resolution microscopic evaluation of grain and grain boundaries of cerium-based codoped solid electrolytes

Doped CeGdO and codoped CeGdOSmO compositions were synthesized, giving rise to nanoparticulate powders. Ionic conductivities at bulk and grain boundaries of the sintered samples were determined, exhibiting increased conductivity in the samaria-codoped samples. Scanning electron microscopy (SEM) showed a significant reduction in the grain size of samaria-codoped electrolytes. This reduced grain size of the codoped samples caused a reduction in Schottky barrier height, increasing oxygen vacancy concentration in the space-charge layer of the grain boundary and culminating in greater ionic conductivity in the boundary region. For the gadolinium doped samples, high resolution transmission electron microscopy images at grains showed the presence of large cluster of defects (nanodomains), hindering the movement of charge carriers and reducing ionic conductivity. However, the samaria-codoped system displayed better homogeneity at atomic level, resulting in reduced oxygen vacancy ordering and, consequently, smaller nanodomains and higher bulk (grain) conductivity. The reduced grain sizes and smaller nanodomains caused by codoping favor the ionic conductivity of ceria-based ceramics, doped with gadolinia and codoped with samaria.     

XANES investigation of the enhanced chemical stability of Pd in supported Pd–Mo catalysts

The XANES (X-ray absorption near edge structure) technique was used to study Pd and Mo catalysts deposited on supported Al₂O₃/SiO₂ and Al₂O₃/Si-MCM-41 in the form of monometallic and bimetallic systems. The results indicate that Pd has stronger chemical stability when in the presence of Mo and is always in the metallic form, which is surprising, because the samples were not subjected to reducing conditions prior to the measurements. The increased stability was attributed to the formation of a core-shell structure with a Pd rich core and a Mo rich surface.     

Electrical and rheological percolation in poly(vinylidene fluoride)/multi‐walled carbon nanotube nanocomposites

Nanocomposites of poly(vinylidene fluoride) (PVDF) and multi‐walled carbon nanotubes (MWCNTs) were prepared through melt blending in a batch mixer (torque rheometer equipped with a mixing chamber). The morphology, rheological behavior and electrical conductivity were investigated through transmission electron microscopy, dynamic oscillatory rheometry and the two‐probe method. The nanocomposite with 0.5 wt% MWCNT content presented a uniform dispersion through the PVDF matrix, whereas that with 1 wt% started to present a percolated network. For the nanocomposites with 2 and 5 wt% MWCNTs the formation of this nanotube network was clearly evident. The electrical percolation threshold at room temperature found for this system was about 1.2 wt% MWCNTs. The rheological percolation threshold fitted from viscosity was about 1 wt%, while the threshold fitted from storage modulus was 0.9 wt%. Thus fewer nanotubes are needed to approach the rheological percolation threshold than the electrical percolation threshold. Copyright © 2010 Society of Chemical Industry