In vitro intestinal absorption of amino acid mixtures extracted from codfish (Gadus morhua L.) salting wastewater

This study reports on the intestinal permeability of salt‐containing mixtures of amino acids extracted from codfish salting wastewater. Permeability was evaluated in vitro using the Caco‐2 cell line model; cell integrity during exposure to mixtures of amino acids was estimated by measuring the transepithelial electrical resistance (TEER). The effect of salt (NaCl) on the permeability and on the intestinal cell's integrity was also examined. Permeation rate (i.e. transport) was ≥95% for all amino acids except for creatine, for which it was 6%. Values for apparent permeability coefficients, P_app > 10^?5 cm s^?1, for mixture with isotonic concentration of NaCl suggest that amino acids are very likely to be absorbed in humans. Mixture with a hypertonic level of NaCl exerts a cytotoxic effect in intestinal cells resulting in a loss of epithelium integrity. Results show that isotonic mixture of amino acids extracted from codfish salting wastewater could be used in food, feed, cosmetic and pharmaceutical formulations. These applications could contribute to the fish industry sustainability.     

Highly translucent nanostructured glass-ceramic

Transparent and translucent glass-ceramics (GCs) are found in an increasing number of domestic and high-technology applications. In this paper, we evaluated and optimized the effects of two-stage heat treatments on the resulting crystalline phases and microstructure of a glass of the SiO₂–Li₂O–P₂O₅–TiO₂–CaO–ZnO–Al₂O₃ system. The objective was to develop a transparent nanostructured glass-ceramic (GC). After numerous heat treatment trials, we found that a long nucleation period of 72 h at 455 °C followed by a crystal growth treatment at 660 °C for 2 h resulted in a highly translucent GC having homogenously distributed nanocrystals. The relatively high amount of P₂O₅ (2.5 mol%) induced the formation of lithium disilicate as the main crystal phase. We thus developed a GC having crystals under 50 nm, with a high crystallized fraction (52%vol. Li₂Si₂O₅ and 26% vol Li₂SiO₃), transmittance of approximately 80% in the visible spectrum for 1.2 mm thick specimens, nano hardness of 8.7 ± 0.1 GPa (load of 400 mN), a high elastic modulus of 138 ± 3 GPa as measured by nanoindentation, and good flexural strength (350 ± 40 MPa) as measured by ball-on-3 balls tests. Due to its high content of Li⁺, this GC has the potential to be chemically strengthened and can be further developed to be used in a number of applications, such as on displays of electronic devices.     

Asymptotic Properties of a Probabilistic‐Statistical Model of Particle Classification in Hydrocyclones

The peculiarities of practical implementation of a probabilistic‐statistical model for a hydrodynamic stage of particle classification process of liquid‐solid polydisperse systems in cylinder‐conic hydrocyclones of small size have been investigated. Within reasonable assumptions, stationary solutions of the Fokker‐Planck‐Kolmogorov kinetic equation were obtained for the considered separation process. In order to describe changes in characteristics of suspension separation in hydrocyclones it was proposed to use stationary distributions, which parameters depend not only on hydraulic and dynamic features of flows inside an apparatus, but also are determined by relative magnitudes of the impact of particle classification and centrifugal forces in comparison with the intensity of random perturbations.     

Enhancing the hydrogen generation of TiO2 nanoparticles by decorating its surface with BiI3 and PbI2 quantum dots

This work reports the performance of TiO₂/BiI₃ and TiO₂/PbI₂ nanocomposites for hydrogen generation. BiI₃ and PbI₂ quantum dots (QDs) were grown on TiO₂ (P25 Degussa) using a fast injection method. According to the analysis by X-ray diffraction, the nanocomposites have a mixture of anatase, rutile and cubic phases from TiO₂, BiI₃ and PbI₂. The images obtained from transmission electron microscopy revealed that the TiO₂ support have sizes in the range of 70–220 nm while the QDs of BiI₃ and PbI₂ (co-catalysts) grown on TiO₂ have sizes in the range of 12–17 nm. The presence of these iodides on TiO₂ created oxygen vacancies defects (confirmed by photoluminescence measurements) that extended the light absorption of TiO₂ from the UV to the VIS range. According to the results from the photocatalytic experiments for hydrogen generation (achieved using pure water and UV-VIS light), the hydrogen generation rates produced by the TiO₂/BiI₃ and TiO₂/PbI₂ nanocomposites were 437–580 times, 81–108 times and 21–30 times, higher than these for pure TiO₂, PbI₂ and BiI₃, respectively. The maximum hydrogen generation rates of the TiO₂/BiI₃ and TiO₂/PbI₂ nanocomposites were 290.7 and 219.2 μmol h^?1 g^?1, respectively. In addition, the TiO₂/BiI₃ and TiO₂/PbI₂ nanocomposites contained defects that acted as electron trapping centers, which in turn, delayed the electron-hole recombination and this favored the photocatalytic generation of H₂. Moreover, the heterojunction formed between the TiO₂ and the iodides allowed the transfer of electrons from the conduction band of TiO₂ toward the conduction band of the iodides, creating a “sink” for the electrons which delayed the electron hole recombination. The results presented here demonstrated that the deposition of iodide co-catalyst on TiO₂ is a feasible option to enhance the hydrogen generation.     

Electrochemical study on new polymer composite for zinc corrosion protection

Galvanostatic electrodeposition mode was employed for the synthesis of new polyaniline and polypyrrole-based composite coatings (PANI/PPY) onto pure zinc electrode. Potentiodynamic polarization, open circuit potential measurements and Electrochemical Impedance Spectroscopy (EIS) were employed to assess the ability of these composite coatings to provide an effective barrier to corrosion in chloride environment. Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) observations were employed to characterize the structure and morphology of the modified electrodes. The coatings deposited galvanostatically at lower current density showed the best quality in terms of protection ability towards aggressive medium. It was found that the new PANI/PPY composite coatings had significantly better properties than single polymer coatings regarding the corrosion protection.     

Core–shell polypyrrole nanoparticles obtained by atmospheric pressure plasma polymerization

Polypyrrole hollow nanoparticles were prepared by atmospheric pressure plasma polymerization. The structure of the nanoparticles was studied using Fourier transform infrared and X‐ray photoelectron spectroscopies, thermogravimetric analysis, scanning and transmission electron microscopies and atomic force microscopy. In contrast to low‐pressure plasma polymerization of pyrrole, which can produce films and solid nanoparticles, we obtained two types of hollow nanoparticles: a fraction with single spherical core and another with a core composed of small bubbles. Thermal characterization allowed us to determine that the nanoparticles are composed of highly crosslinked polymer. A mechanism that explains the formation of both types of hollow nanoparticles as well as solid nanoparticles is proposed. Chemical characterization shows that, in addition to the expected chemical structures due to pyrrole polymerization, the high energy of the plasma at atmospheric pressure produces intense dehydrogenation and oxidation processes. The fluorescence spectrum of the nanoparticles, however, shows a peak at 482 nm indicating that some degree of π‐conjugation is present in the material. © 2014 Society of Chemical Industry     

Paper‐Derived Bioactive Glass Tape

Porous bioactive glass (BaG) structures were manufactured applying novel preceramic paper process. Preceramic papers were produced for aqueous suspensions loaded with different contents of pulp fiber and BaG filler. Pressure loading was applied in order to increase the packing density in the paper sheets. The paper sheets were sintered at 630 °C for 1 h. The porous glass–ceramic specimens were characterized for density, porosity, composition, microstructure, and mechanical properties. A pronounced volumetric shrinkage was observed, but no surface flaws or inhomogeneous areas were detected. The mechanical strength using the ball on three balls test and elastic modulus of sintered specimens vary between 21 and 33 MPa and 0.30–0.85 GPa, respectively.     

On application of input data partitioning to Bayesian weighted averaging of biomedical signals

Averaging in the time domain may be used for noise attenuation in case of biomedical signals with a quasi‐cyclical character. Traditional arithmetic averaging technique assumes the constancy of the noise power cycle‐wise, however, most types of noise are not stationary and the variability of noise power is observed. It constitutes a motivation for using methods of weighted averaging, in particular Bayesian weighted averaging. This paper presents the computational study of Bayesian weighted averaging with traditional (sharp) and fuzzy partition of the input data in the presence of non‐stationary noise. There is presented the known empirical Bayesian weighted averaging method (EBWA), with the parameter p describing the probabilistic model, and its modification NBWA which eliminates the parameter. Both methods can be extended by partitioning of the input data. The performance of presented methods is experimentally evaluated for an analytical signal as well as a real ECG signal and compared with traditional arithmetic averaging method. However, the methods can be applied to any signal with a quasi‐cyclical character. The aim of the paper is to show the influence of the type of partition as well as the number of parts on the quality of the averaged signal.