Design,synthesis, and nanoengineered modification of spherical graphene surface by layered double hydroxide (LDH) for removal of As(III) from aqueous solutions

In this study, new nano spherical graphene modified with LDH (Layered Double Hydroxide) was prepared and used to remove As(III) ion from aqueous solutions. At first, graphene oxide was synthesized from graphite using a well-known Hammer method. The obtained graphene oxide solution was sprayed in octanol solution under different temperatures and sprayed speed as influenced variables. The structure and physical characterization of synthesized spherical graphene oxide were determined by various techniques, including FT-IR, N₂ adsorption–desorption, SEM, TEM, and EDX. In the next step, the hydrothermal method was applied to deposition LDH on the spherical graphene oxide. The synthesized spherical graphene modified by LDH was used to remove As(III) as a toxic heavy metal ion. The effect of influenced variables including pH, contact time, amount of sorbent, and type eluent studied and the optimum values were as 8, 30, 50, and HCl (0.5 mol·L^-1), respectively. After optimization, the studied sorbent was shown a high adsorption capacity (149.3 mg·g^-1). The adsorption mechanism and kinetic models exhibited good agreement with the Langmuir isotherm and pseudo-second-order trends, respectively. Besides, the synthesized product was tested for seven times without significant loss in its sorption efficiency.     

Network model for the viscoelastic behavior of polymer nanocomposites

A theoretical network model reproducing some significant features of the viscoelastic behavior of unentangled polymer melts reinforced with well dispersed non-agglomerated nanoparticles is presented. Nanocomposites with low filler volume fraction (∼10%) and strong polymer-filler interactions are considered. The model is calibrated based on results obtained from discrete simulations of the equilibrium molecular structure of the material. This analysis provides the statistics of the network of chains connecting fillers, of dangling strands having one end adsorbed onto fillers, and that of the population of loops surrounding each nanoparticle. The network kinetics depends on the attachment-detachment dynamics of grafted chains of various types and is modeled by using a set of convection equations for the probability distribution functions. The overall viscoelastic response depends strongly on the lifetime of the polymer-filler junctions. The largest reinforcement is observed at low strain rates and low frequency oscillations. A solid like behavior is predicted for systems in which the polymer molecules interact strongly with the nanoparticles, effect which is associated with the behavior of the network of bridging segments.     

Effect of fuel type on structural and physicochemical properties of solution combustion synthesized CoCr2O4 ceramic pigment nanoparticles

Due to importance and wide applications, CoCr₂O₄ ceramic pigment nanoparticles were synthesized via low-temperature solution combustion route by different fuels including ethylenediamine/oxalic acid, ethylenediamine/citric acid, oxalic acid/citric acid and ethylenediamine/oxalic acid/citric acid. Physicochemical properties of the synthesized samples were determined by different techniques such as fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX) and color/optical properties were evaluated based on CIELAB system by spectrophotometer. Moreover, thermodynamic considerations of combustion reactions for CoCr₂O₄ nanopigments formation in terms of calculated adiabatic flame temperature and enthalpy of combustion reaction were studied. The Comparison of results and data showed that cobalt chromite pigment nanoparticles synthesized by using ethylenediamine/citric acid and ethylenediamine/oxalic acid/citric acid fuels exhibited higher purity, smaller crystallite size and lower degree agglomeration.     

Highly effective organometallic‐mediated radical polymerization of vinyl acetate using alumina‐supported Co(acac)2 catalyst: A case study of adsorption and polymerization

An alumina support system for cobalt^(II) acetylacetonate (Co(acac)₂) catalyst was studied for the cobalt‐mediated radical polymerization (CMRP) of vinyl acetate (VAc). We report a simple but efficient technique to produce this supported catalysts through the adsorption of Co(acac)₂ on the surface of alumina particles. Moreover, kinetic and thermodynamic study of Co(acac)₂ adsorption on the alumina support were conducted and the influence of effective parameters were investigated. It was found that using alumina‐supported Co(acac)₂ for radical polymerization of VAc yields polymers with controlled molecular weight, narrow molecular weight distribution, and high purity. For the alumina‐supported CMRP, changing the polymerization mechanism and domination of termination pathway compared to degenerate transfer pathway resulted in a 2.5 times increase in polymerization rate (k_ap) and a drop in induction time while maintaining a good control of the VAc polymerization. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46057.     

A crossover‐UNIQUAC model for critical and noncritical LLE calculations

A new model, named the crossover‐UNIQUAC model, has been proposed based on the crossover procedure for predicting constant‐pressure liquid–liquid equilibria (LLE). In this manner, critical fluctuations were incorporated into the classical UNIQUAC equation. Coexistence curves were estimated for systems having a diverse range of asymmetries. These systems included the LLE of five different mixtures, composed of nitrobenzene with one of the members of the alkane homologous family (either pentane, octane, decane, dodecane, or tetradecane), as well as an extra system having a different chemical nature, namely the mixture of n‐perfluorohexane and hexane, to further check the validity of the proposed approach. Using these nonideal mixtures, the validity of the new model was investigated within wide ranges, covering near‐critical to regions falling far away from the critical point. The graphical trends, as well as the quantitative comparison with experimental data indicated the good agreement of the proposed model results with the experimental data. A maximum AARD% value of 3.97% was obtained in calculating molar compositions by the proposed model for such challenging systems covering noncritical, as well as critical regions. In addition, to show the strength of the proposed crossover approach to describe properties other than LLE, molar heat capacities were investigated for the system of nitrobenzene + dodecane. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3094–3103, 2015     

Use of axial dispersion model for determination of Sherwood number and mass transfer coefficients in a perforated rotating disc contactor

The mass transfer process in a perforated rotating disk contactor (PRDC) using a toluene-acetone-water system was investigated.The volumetric overall mass transfer coefficients are calculated in a PRDC column.Both mass transfer directions are considered in experiments.The influences of operating variables containing agitation rate,dispersed and continuous phase flow rates and mass transfer in the extraction column are studied.According to obtained results,mass transfer is significantly dependent on agitation rate,while the dispersed and continuous phase flow rates have a minor effect on mass transfer in the extraction column.Furthermore,a novel empirical correlation is developed for prediction of overall continuous phase Sherwood number based on dispersed phase holdup,Reynolds number and mass transfer direction.There has been great agreement between experimental data and predicted values using a proposed correlation for all operating conditions.     

A new manufacturable filter design approach for spectral reflectance estimation

Selection of the best possible filter set among a set of available filters is the obvious method of increasing dimension of camera signals for spectral reflectance reconstruction. There are also methods that are focusing on the filter design regardless of noticing to the constructability of the designed filters. This study shows that direct optimization of physical variables of filter manufacturing technique is more reliable than indirect approach of designing and then physical manufacturing of the designed filters. Direct optimization of the transmission‐controlling primaries in filter manufacturing process would guarantee having the designed filters in reality. Combination of some solvent dyes was used as the spectral transmission matching system for filter manufacturing. As a conventional technique, filters were designed and best possible dye concentrations that match the desired filters were calculated. As an alternative approach, filters were also designed using direct optimization of dyes concentrations. The results showed that direct optimization of dye concentrations exhibits better performance in comparison with the conventional technique. © 2016 Wiley Periodicals, Inc. Col Res Appl, 42, 316–326, 2017     

High‐performance carboxylate superplasticizers for concretes: Interplay between the polymerization temperature and properties

Polycarboxylate superplasticizers based on acrylic acid (AA) and maleic anhydride (MAn) were synthesized via free‐radical copolymerization with an ethylene glycol monomer and characterized. The copolymerization temperature (ranging from 50 to 90 °C) appeared to be the key operating factor governing the chemical structure of the superplasticizers. The chemical structures of the products were analyzed by gel permeation chromatography, whereas an optimized sample was further analyzed by Fourier transform infrared spectroscopy and ¹H‐NMR. Superplasticizers of the AA and MAn classes were then incorporated into concrete, and their performances were measured by slump and slump loss tests, where a large dependency of the microstructure on the synthesis temperature was recognized. The optimum temperatures were found to be 50 and 80 °C for the AA and MAn modifiers, respectively. At their own optimum temperatures, the AA and MAn superplasticizer revealed slump losses from 23 to 4 cm and 15 to 5 cm, respectively, after 45 min. The chemical structures of the plasticizers were patterned illustratively to speculate the performance of each superplasticizer according to changes that took place in the backbone length and side‐chain density. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44908.