A model for stress-dependence of apparent permeability in nanopores of shale gas reservoirs

Predicting long-term production from gas shale reservoirs is a challenging task due to changes in effective stress and permeability during gas production. Unlike coal, the variation of sorbing gas permeability with pore pressure in shale does not always feature a biphasic trend under a constant confining pressure. The present contribution demonstrates that the biphasic dependence of permeability on pore pressure depends on a number of physical and geometrical factors, each with a distinct impact on gas permeability. This includes pore size, adsorption isotherm, and the variation of gas viscosity with pore pressure. A single-capillary model is proposed for the apparent permeability of real gas in shale. Results indicate that the biphasic relation between apparent permeability and pore pressure is prevalent when the sorbing gas flows in sufficiently small pores. In addition, the effects of sorption isotherm and internal resistance of nonideal gas to flow cannot be ignored.     

A crossover‐UNIQUAC model for critical and noncritical LLE calculations

A new model, named the crossover‐UNIQUAC model, has been proposed based on the crossover procedure for predicting constant‐pressure liquid–liquid equilibria (LLE). In this manner, critical fluctuations were incorporated into the classical UNIQUAC equation. Coexistence curves were estimated for systems having a diverse range of asymmetries. These systems included the LLE of five different mixtures, composed of nitrobenzene with one of the members of the alkane homologous family (either pentane, octane, decane, dodecane, or tetradecane), as well as an extra system having a different chemical nature, namely the mixture of n‐perfluorohexane and hexane, to further check the validity of the proposed approach. Using these nonideal mixtures, the validity of the new model was investigated within wide ranges, covering near‐critical to regions falling far away from the critical point. The graphical trends, as well as the quantitative comparison with experimental data indicated the good agreement of the proposed model results with the experimental data. A maximum AARD% value of 3.97% was obtained in calculating molar compositions by the proposed model for such challenging systems covering noncritical, as well as critical regions. In addition, to show the strength of the proposed crossover approach to describe properties other than LLE, molar heat capacities were investigated for the system of nitrobenzene + dodecane. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3094–3103, 2015     

Highly effective organometallic‐mediated radical polymerization of vinyl acetate using alumina‐supported Co(acac)2 catalyst: A case study of adsorption and polymerization

An alumina support system for cobalt^(II) acetylacetonate (Co(acac)₂) catalyst was studied for the cobalt‐mediated radical polymerization (CMRP) of vinyl acetate (VAc). We report a simple but efficient technique to produce this supported catalysts through the adsorption of Co(acac)₂ on the surface of alumina particles. Moreover, kinetic and thermodynamic study of Co(acac)₂ adsorption on the alumina support were conducted and the influence of effective parameters were investigated. It was found that using alumina‐supported Co(acac)₂ for radical polymerization of VAc yields polymers with controlled molecular weight, narrow molecular weight distribution, and high purity. For the alumina‐supported CMRP, changing the polymerization mechanism and domination of termination pathway compared to degenerate transfer pathway resulted in a 2.5 times increase in polymerization rate (k_ap) and a drop in induction time while maintaining a good control of the VAc polymerization. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46057.     

Electrophoretic deposition of titanium nitride coatings

Electrophoretic deposition of the titanium nitride (TiN) coatings from suspensions prepared by dispersion of TiN particles in triethanolamine (TEA) containing butanol medium was studied. Effects of the TiN particles concentration (C_TiN) on the weight of the deposited coatings, triethanolamine concentration (C_TEA=0.25, 0.5, 0.75, and 1 mL/L) on the Zeta potential of the TiN particles, suspension electrical conductivity and pH, as well as effects of the deposition voltage (V_d=60, 90, and 120 V) and time (t_d =1, 2, and 3 minutes) on the microstructure and thickness of the deposited coatings were investigated. Variations in deposition current density, effective deposition voltage, electrical resistance, and deposited coating weight versus deposition time were recorded. The morphology of the as‐dried coatings was studied using Scanning Electron Microscope (SEM). The results indicated that by increasing the C_TiN the weight of deposits increases linearly up to 40 g/L. For suspensions containing C_TiN=40 g/L, the optimum C_TEA is obtained to be 0.5 mL/L leading to Zeta potential of 43.25 mV. Uniform and crack‐free as‐dried coatings obtained at V_d and t_d of 90 V and 2 minutes, respectively.     

Morphological evolution on the surface of hydrothermally synthesized hydroxyapatite microspheres in the presence of EDTMP

Well-ordered and surface engineered hierarchical hydroxyapatite microspheres (HAM) were prepared via a template free hydrothermal process. Ethylene diamine tetra (methylene phosphonic acid) (EDTMP) was used as chelating or regulating agent for the first time in this study. The results indicated the formation of sheet-like particles in the absence of EDTMP. On the other hand, microspheres with radially grown nanorods (HAMNR) or nanosheets (HAMNS) on the surface were obtained (with average diameter of 5?µm) in the presence of EDTMP. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy were used to characterize the crystalline phases in the synthesized samples. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that EDTMP concentration played an important part in regulating the morphology to form well organized microspheres with nanosheets or nanorods on the surface. Brunauer-Emmett-Teller (BET) revealed an increase in the specific surface area with the change in morphology from the HAMNS to HAMNR. Possible mechanisms are proposed to account for the formation of different morphologies based upon thermodynamic and kinetic theories.     

Controlled release of fluorouracil (5-FU) from chitosan-co-poly(ethylene glycol)/ poly(glycerol sebacate)-co-poly(ethylene glycol)-coated iron oxide

A blend of polyglycerol sebacate-poly ethylene glygol/chitosan-poly ethylene glycol-coated iron oxide (PGS-PEG/CS-PEG@Fe₃O₄) nanoparticles for 5FU delivery was prepared by reverse ultrasonic emulsification method. To enhance polymers’ solubility, PEG was grafted. Chemical characterization was performed through Fourier transformed infrared and proton nuclear magnetic resonance spectra. In vitro assay revealed that release profile of 5FU-loaded PGS-PEG/CS-PEG@Fe₃O₄ is sustained. Moreover, cytotoxicity was analyzed on HT29 cell line at the presence of external magnetic field using the lactate dehydrogenase and Alamar Blue. Results illustrate that (PGS-PEG/CS-PEG@Fe₃O₄) is promising to use as a carrier for 5FU anticancer agent with sustained tailored release.