Hybrid CV-CC operation of capacitive deionization in comparison with constant current and constant voltage

Capacitive deionization (CDI) is a technique used to desalinate saline water by means of electrical potential applied to the electrode along both sides of a spacer channel through which water flows. CDI operates either at constant voltage (CV) or at constant current (CC) operation to desalinate saline water. The purity of the water is the main requirement at the outlet of the cell. The lowest effluent concentration is achieved within a very short time by operating the CDI cell at CV, but after that the effluent concentration continues to increase. On the other hand, in CC, the lowest concentration is achieved later as compared with CV, but once it is achieved it continues to remain constant until the target voltage is reached. In this paper, we combine both CV and CC operation to get the lowest concentration for maximum time during the adsorption process so that more desalinated water is produced. We compare hybrid CV-CC and constant voltage and constant current in terms of effluent concentration, energy consumption per ion removal, water recovery, and water quality by varying operational parameters like cell potential. It was observed that ultrapure water can be produced with hybrid CV-CC operation by systematically varying different process parameters like flow rate and cell potential to get better results.     

Facile Synthesis of Ferrocene-Based Polyamides and Their Organic Analogues Terpolyamides: Influence of Aliphatic and Aromatic Sequences on Physico-Chemical Characteristics

Efforts have been devoted to synthesize and characterize processable polymers with desired properties. Herein, four different series of aromatic and aliphatic terpolyamides were prepared via solution phase polycondensation of 4,4′-oxydianiline and hexamethylenediamine (HMDA) with various diacids chlorides (isophthalyol dichloride, terepthalyol dichloride, 1, 1′-ferrocene dicarboxylic acid chloride and trans-azobenzene-4, 4′-dicarbonyl chloride). The structural, morphological and physico-chemical nature of as prepared polymers was explored by Fourier-transform infrared spectroscopy, scanning electron microscopy, thermal analysis (TGA and DSC), and wide-angle x-ray diffraction. Moreover, an aliphatic diamine was incorporated in varying concentration as a flexible methylene spacer and the effect of its concentration on the properties of polyamides was also studied. Changes in various physico-chemical properties such as solubility, inherent viscosity, surface morphology and flame retarding behaviour were investigated. Marked difference in morphology and solubility was observed with the change in the ratio of segments in the chain. Inherent viscosities of polymers ranged from 1.8052–1.6274 dl/g indicating reasonably moderate molecular weights. Interestingly, ferrocene based aromatic polymers were more thermally stable (T_g 260 °C, T_i 310 °C, T_h 525 °C, T_f 720 °C, for PF₀), and also found to exhibit best flame retarding behavior (limiting oxygen index value for PF₀is LOI 33.15%).

     

The Plastome Sequences of Triticum sphaerococcum (ABD) and Triticum turgidum subsp. durum (AB) Exhibit Evolutionary Changes,Structural Characterization,Comparative Analysis,Phylogenomics and Time Divergence

The mechanism and course of Triticum plastome evolution is currently unknown; thus, it remains unclear how Triticum plastomes evolved during recent polyploidization. Here, we report the complete plastomes of two polyploid wheat species, Triticum sphaerococcum (AABBDD) and Triticum turgidum subsp. durum (AABB), and compare them with 19 available and complete Triticum plastomes to create the first map of genomic structural variation. Both T. sphaerococcum and T. turgidum subsp. durum plastomes were found to have a quadripartite structure, with plastome lengths of 134,531 bp and 134,015 bp, respectively. Furthermore, diploid (AA), tetraploid (AB, AG) and hexaploid (ABD, AGA^m) Triticum species plastomes displayed a conserved gene content and commonly harbored an identical set of annotated unique genes. Overall, there was a positive correlation between the number of repeats and plastome size. In all plastomes, the number of tandem repeats was higher than the number of palindromic and forward repeats. We constructed a Triticum phylogeny based on the complete plastomes and 42 shared genes from 71 plastomes. We estimated the divergence of Hordeum vulgare from wheat around 11.04–11.9 million years ago (mya) using a well-resolved plastome tree. Similarly, Sitopsis species diverged 2.8–2.9 mya before Triticum urartu (AA) and Triticum monococcum (AA). Aegilops speltoides was shown to be the maternal donor of polyploid wheat genomes and diverged ~0.2–0.9 mya. The phylogeny and divergence time estimates presented here can act as a reference framework for future studies of Triticum evolution.     

Mechanical,Thermal and Electrical Resisitivity Properties of Thermoplastic Composites Filled with Carbon Fibers and Carbon Particles

Composites consisting of carbon fibers (CF) and carbon particles (CP) in polypropylene (PP) matrix were melt-compounded. Composites were analyzed for their mechanical, electrical and thermal properties. Results indicate that the addition of these fillers improved the mechanical properties of the composites. Thermal conductivity was enhanced as the concentration of fillers was increased. Carbon fibers render the composites electrically conductive so we observed a percolation threshold near 10 wt.% of CF for PP/CF (PP and CF composite) and near 25 wt.% of CP for PP/CP (PP and carbon particle composite). All the results indicated that carbon fibers are more effective in improving the properties as compare to the carbon particles.     

Magnetron sputtered Dy_2O_3 with chromium and copper contents for antireflective thin films with enhanced absorption

Dy_2O_3 is a rare earth oxide having a number of advanced applications in various fields including protective or antireflective coatings, Main objective of this novel research work is to check the effect of Cr and Cu addition on different properties of Dy_2O_3 and achievement of antireflective thin films with enhanced abso rption. Thin films of these materials we re deposited using DC magnetron with reactive cosputtering. XRD studies reveals the crystalline nature of thin films having Dy_2O_3(222) reflection in all samples with Cr_2O_3(116) and CuO(111) reflections in Cr and Cu containing compositions. Field emission scanning electron microscopy demonstrates the homogeneous deposition of thin films with uniform shape, size and distribution of grains. Refractive index, extinction coefficient and absorption coefficient significantly increase while optical reflectance decreases with Cr and Cu mediation corroborating an improved antireflective mechanism. The imaginary part of dielectric constant is found to increase slightly with low tangent loss for Cr containing composition co nsidered favorable for energy storage applications.     

Characterization of vanadyl phthalocyanine based surface-type capacitive humidity sensors

This study presents the fabrication and characterization of novel surface-type capacitive humidity sensors using vanadyl phthalocyanine (VOPc) as the active material. The devices, which comprise three different thicknesses,have been fabricated using the thermal evaporation technique. A thin film of VOPc is deposited on thoroughly cleaned glass substrates with pre-pattemed Ag electrodes. The capacitive effect of the samples under humidity has been in-vestigated. Comparison of the samples with different thicknesses shows that the thinnest device seems more sensitive towards humidity. The humidity dependent capacitance properties of the sensor make it beneficial for use in commercial hygrometers.     

Microwave-Assisted Pretreatment of Sago Palm Bark

Three types of microwave-assisted diluted solvents were employed using 0.1 N H₂SO₄ (MSA), 0.1 N NaOH (MSH), and 0.01 N NaHCO₃ (MSB). These solvents were evaluated as possible pretreatment routes for sago palm bark (SPB) with their effects on the pretreated substrate. A variety of analyses, consisting of fiber analysis, energy dispersive X-ray spectroscopy (EDX), X-ray fluorescence spectrometer (XRF), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and high-performance liquid chromatography (HPLC), were performed to understand the pretreatment effects on the chemical and physical characteristics of SPB and pretreatment liquor. The thermal analysis has revealed that higher hemicellulose degradation was also found in MSA pretreatment. In the analyses of the pretreatment liquid for the extracted monomeric sugar, a higher amount of glucose was found (9 mg/g) using MSH pretreatment and the highest xylose level was found (4 mg/g) using MSA pretreatment. The analysis of the formation of inhibitors has shown that acetic acid was only found in the MSH pretreatment.     

A study on fluorescence properties of Eu3+ ions in alkali lead tellurofluoroborate glasses

Glasses with chemical composition of (in mol.%): 26 RF-20 PbO-10 TeO2-43 H3BO3-1 EuO3 (RLTB) were prepared by conventional melt quenching method. The Judd-Ofelt intensity parameters Ω2 and Ω6 were obtained from the absorption intensities of 7F0→5D2 and 7F0→5L6 transitions, respectively. In order to overcome the problem of applicability of Judd-Ofelt analysis at room temperature due to the overlapping of the transitions originating from 7F0 and 7F1 levels of Eu3+ ion, the effect of the thermalization on the population of energy levels was taken into account. The photoluminescence spectra contained five emission bands originating from the 5D0 metastable state to 7FJ (J=0, 1, 2, 3, 4) lower lying states. The decay profiles were found to be single exponential in all the three glasses. The measured lifetimes (τmes) were in good agreement with the calculated lifetimes (τcal) obtained by using the thermally corrected Judd-Ofelt intensity parameters.     

Sink-oriented tree based data dissemination protocol for mobile sinks wireless sensor networks

Wireless Networks - Data dissemination toward static sinks causes the nearby nodes to deplete their energy quicker than the other nodes in the field (i.e., this is referred to as the hotspot...     

Heart rate variability in low birth weight growth restricted children during sleep and wake stages

Intrauterine growth restricted (IUGR) individuals have greater predisposition to develop a metabolic syndrome in later life manifesting itself as obesity, hypertension, type 2 diabetes or cardiovascular disease. Poor fetal growth may alter the regularity mechanism of cardiac autonomic system that is involved in the development of these diseases. The malfunctioning of the cardiac autonomic system assessed by decrease in heart rate variability (HRV) is associated with negative cardiovascular outcomes. This study is aimed at investigating the risk of development of coronary heart disease in IUGR children in later life. For that purpose HRV analysis of normal and growth restricted children was performed during sleep and wake stages. The study group consisted of 9–10 years old, 32 normal, 20 low birth weight IUGR children. The standard time domain HRV metrics (mean RR, SDNN, RMSSD, NN50 and pNN50) and Poincaré indices (SD₁ and SD₂) were used to analyse and compare the RR-interval time series of these groups. The IUGR children showed lower HRV as compared with normal children during both sleep and wake stages. The significantly decreased HRV during sleep provide an evidence of autonomic derangement that may be associated with higher risk of lethal arrhythmias in the IUGR children in later life.