Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry     

CX6112车铣复合机床设计方案的研究与探讨

文章较系统地论述了车铣复合机床设计方案的形成过程，同时分析了该设计方案的持点，并简要介绍了该产品的主要技术参数和用途，简评了该产品的技术水平。     

FFFIS编解码算法与实现

在对FFFIS(Form Fit Function Interface Specification)的Eurobalise报文特点进行简单介绍的基础上,对其编解码算法进行了探讨,并根据FFFIS标准提出了高速算法以及系统软硬件实现方案,最后对其应用进行了简单介绍。     

Reduction of triceps muscle force after shortening of the distal humerus: a computational model

A retrospective case reference study examining the use of alcohol and tobacco in 303 women aged 40 or over suffering from oral or oropharyngeal cancer was conducted in the south-west Netherlands. Both alcohol and tobacco consumption are important in the development of oral and oropharyngeal cancer with increased consumption of both markedly increasing the risks of cancer, but alcohol having the greater effect.     

关系数据库在专家系统中的应用

在传统的专家系统中，对推理机工作过程的控制是程序实现的。本文介绍了一个用数据库技术引导推理过程的专家系统－精神分裂症诊断专家系统（ＥＳＳＤ）的推理控制策略。在这个专家系统中，作者将有关推理过程的控制信息用关系数据库技术进行存储和管理，达到了将控制策略数据化的目的。将数据库技术引入到专家系统的推进控制机制中可以使控制策略比较容易调整，且而可以大大压缩程序篇幅，显著提高系统运行效率，为专家系统的结构设     

Rapid synthesis of La0.7Sr0.3MnO3+λ catalysts by microwave irradiation process

Microwave irradiation processing (MIP) was considered as a potential method to synthesize perovskite-type oxides rapidly, cleanly and energy-efficiently. In this paper, La_0.7Sr_0.3MnO_3+λ, a kind of promising catalyst for automobile exhaust purification, was successfully prepared by MIP in not more than 5 min. The sol–gel method was also used for comparison. All the samples were evaluated by catalytic activity tests in the simulated exhaust and characterized by XRD, BET, TEM and XRF analyses. The results showed that the integrated perovskite-type phase and uniform particle size were obtained in the microwave-treated samples. And those ones exhibited a better oxidation activity under slightly oxygen-rich condition than that by sol–gel method, which may be related to more A-site cation vacancies and larger bulk oxygen content generated in MIP. Possible formation mechanism of perovskites in MIP was also discussed.     

立管系统中严重段塞流的一维瞬态模型

严重段塞流主要出现在下倾管段、紧接有一上倾管段或立管段的气、液两相混输海底管道中。根据严重段塞流形成的4个阶段,从一维瞬态流体力学方程出发,建立了一个简化的、准平衡态的严重段塞流数学模型,该模型考虑了流体的物性及流动瞬态效应,可对严重段塞长度、段塞周期、流动速度、压力等特性参数的变化进行模拟。与其他瞬态多相流模型相比,本文模型具有数学模型简单、计算效率高的特点。数值模拟结果表明:当管径较小时,无论介质是空气和水,还是空气和油,由本文模型计算得到的段塞周期和压力结果都与实验数据吻合较好;当管径较大时,若介质为空气和水,则本文模型计算结果与OLGA软件模拟结果较接近;若介质为石油和天然气,在模拟工况范围内,除了小气量工况下偏差较大外,本文模型计算结果与OLGA软件模拟结果相比,段塞周期偏差在25%以内,压力偏差在10%以内;此外,用本文模型计算液塞生长阶段时间t1比Saga-tun模型模拟结果更接近实测结果。     

大庆油田深层岩石力学特性参数的试验研究

通过对岩石可钻性、硬度、抗压强度等参数的测量 ,对大庆油田深井不同深度、不同层位、不同岩性的具有广泛代表性的岩心进行试验。并通过线性回归分析 ,建立了适用性较广的钻井岩石力学特性参数预测模型 ,为深井钻头选型提供了依据。     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

塔河油田三叠系水平井地质导向技术研究

针对塔河油田三叠系碎屑岩油气藏油层薄、储集层非均质性较强、泥质和低渗致密夹层纵横向变化大的地质特点，在分析、研究不同区块多口水平井资料的基础上，探讨了水平井不同地质情况下斜井段及目的层砂顶的预测和判别技术，以实例阐述了井眼轨迹调整方法，首次形成了一套适合于该地区碎屑岩非均质薄层油气藏水平井录井地质导向技术，在塔河油田水平井钻探开发中取得了显著的成效。