Stability during storage of LC-PUFA-supplemented infant formula containing single cell oil or egg yolk

The medical community recommends that infant formulae should mimic human milk as far as possible, particularly in regards to long-chain polyunsaturated fatty acids (LC-PUFA). These include arachidonic acid (AA) and docosahexaenoic acid (DHA), both of which provide biochemical and functional benefits to neonates. However, LC-PUFAs are highly susceptible to oxidation and the composition of formulae must be carefully controlled. In this study, the stability of two types of LC-PUFA-supplemented milk-based powdered infant formula was evaluated over the course of 18 months storage at 25 °C and 40 °C. One contained egg yolk phospholipids (IF-EPL) and the other contained triacylglycerides (DHA and AA) synthesized by single cell oils (IF-SCO). The following parameters were monitored: peroxide values, volatile content (propanal, pentanal and hexanal), fatty acid profiles, and potential and free furfural content (5-hydroxymethyl-2-furaldehyde and 2-furaldehyde). In addition, these formulae were subjected to sensory evaluations by a panel of experts. The parameters studied revealed acceptable lipid stability in both types of formula, with better results for IF-EPL. At the end of the study period, significant deficits (p < 0.05) in linoleic acid were noted in both formulae. However, no significant decreases were observed in the other fatty acids, including AA and DHA. In regards to furfural content, both formulae exhibited a similar increase, indicative of the typical Maillard reaction characteristic of products stored for long periods.     

Influence of the Oil Phase on the Microencapsulation by Complex Coacervation

The influence of oil type on the process yield, efficiency of encapsulation, particle size and morphological aspects of coacervated microparticles was investigated. Firstly, several factors affecting microencapsulation of oils by complex coacervation were simultaneously examined. The results indicated that the process yield is mainly dependent on the velocity of homogenization, temperature and polymer ratio. Using optimum conditions for producing microparticles [pH 4.0, 14,000 rpm, 50 °C, gelatin:gum arabic (GE:GA) 1:1 and 2.5 % w/v], different core materials were tested: a vegetable oil (almond oil), an oil with higher hydrophilic lipophilic balance (vetiver essential oil) and a highly hydrophobic oil (mineral oil). The oil phase exerted an influence on microparticle formation, disturbing the complexation of polymers and modifying the core distribution within the particles. Some of the polymers were complexed when mineral oil was used, and the highest efficiency of encapsulation (91.8 %) was obtained with vetiver oil, followed by the almond (70.6 %) and mineral (38.0 %) oils. Particles produced with vetiver oil were larger (43.5 μm) than those produced with mineral oil (35.0 μm) and almond oil (19.2 μm), and the increase in the size is due to the encapsulation of many small droplets of emulsion, characterizing these particles as multinucleate ones.     

Influence of Particle Size on Nonisothermal Crystallization in a Lithium Disilicate Glass

In this study, lithium disilicate (LS₂) glass samples with different particle sizes ranging from less than 105 to 850 μm were prepared. These specimens were inserted in a Pt‐Rh DSC crucible and heated to 850°C at different rates (? = 0.5–30 K/min) to identify their crystallization peaks. The activation energies for the overall crystallization (E) and the Avrami coefficient (n) were evaluated using different nonisothermal models. Specifically, n was evaluated using the Augis–Benett model and the Ozawa method, and E was evaluated using the Kissinger and Ligero methods. As expected, the coarse particles mainly crystallized in the volume, while surface crystallization was predominant in the samples with particle sizes of less than 350 μm. This result was confirmed through SEM analysis of the double stage heat‐treated samples. In contrast with previous studies, our results demonstrated that the activation energy decreased as the particle size increased. In addition, no clear correlation between the peak intensity (δT_p) and the particle size was observed.     

Evaluating vector data type usage in OpenCL kernels

Open Computing Language (OpenCL) is an open, functionally portable programming model for a large range of highly parallel processors. To provide users with access to the underlying platforms, OpenCL has explicit support for features such as local memory and vector data types (VDTs). However, these are often low‐level, hardware‐specific features, which can be detrimental to performance on different platforms. In this paper, we focus on VDTs and investigate their usage in a systematic way. First, we propose two different approaches (inter‐vdt and intra‐vdt) to use VDTs in OpenCL kernels, and show how to translate scalar OpenCL kernels to vectorized ones. After obtaining vectorized code, we evaluate the performance effects of using VDTs with two types of benchmarks: micro‐benchmarks and macro‐benchmarks. With micro‐benchmarks, we study the execution model of VDTs and the role of the compiler‐aided vectorizer on five devices. With macro‐benchmarks, we explore the changes of memory access patterns before and after using VDTs, and the resulting performance impact. Not only our evaluation provides insights into how OpenCL's VDTs are mapped on different processors, but it also indicates that using such data types introduces changes in both computation and memory accesses. Based on the lessons learned, we discuss how to deal with performance portability in the presence of VDTs. Copyright © 2014 John Wiley & Sons, Ltd.     

Cleaner production in Romanian textile industry: a case study

This paper reports the changes resulting from adopting environmentally sensitive criteria in Novatextile Pitesti, Romania. The changes have improved the operation of the production plant and reduced costs at the same time.     

Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Monitoring Phenolic Composition of Maturing Maize Stover by High Performance Liquid Chromatography and Pyrolysis/Gas Chromatography/Mass Spectrometry*

Maize stovers collected every 14 days over an 84-day growth period were subjected to high-performance liquid chromatography with electrochemical detector (HPLC-ED) and pyrolysis/gas chromatography/mass spectrometry (PY/GC/MS) in order to monitor changes in the phenolic composition. Prior to HPLC-ED analyses, ground samples were sequentially extracted with (i) methanol, (ii) 0·1M sodium hydroxide and (iii) 2M sodium hydroxide in the presence of nitrobenzene to separate, respectively, free phenolic monomers, alkali-labile phenolic monomers and alkali-resistant lignin. In turn, solution (ii) was treated with alkaline nitrobenzene to obtain (iv) alkali-labile lignin. Pyrolysis was carried out on ground native samples by using a platinum heated filament pyrolyser. Increases in the absolute phenolic concentrations in the residues of 0·1M sodium hydroxide extraction and in the ratio of alkali-resistant lignin vs total lignin were observed by HPLC-ED during the first 28–42 days of maturation, reaching a steady level in the remaining maturation period. A linear increase of syringyl units vs guaiacyl units was for found the alkali-resistant lignin fraction over the entire period of maturation. Similar trends were showed by PY/GC/MS with regard to relative lignin content and syringyl/guaiacyl ratio. Both techniques showed their usefulness to gauge changes in the phenolic composition during the lignification process.     

Upregulation of Cathepsin X in Glioblastoma: Interplay with γ-Enolase and the Effects of Selective Cathepsin X Inhibitors

Glioblastoma (GBM) is the most common and deadly primary brain tumor in adults. Understanding GBM pathobiology and discovering novel therapeutic targets are critical to finding efficient treatments. Upregulation of the lysosomal cysteine carboxypeptidase cathepsin X has been linked to immune dysfunction and neurodegenerative diseases, but its role in cancer and particularly in GBM progression in patients is unknown. In this study, cathepsin X expression and activity were found to be upregulated in human GBM tissues compared to low-grade gliomas and nontumor brain tissues. Cathepsin X was localized in GBM cells as well as in tumor-associated macrophages and microglia. Subsequently, potent irreversible (AMS36) and reversible (Z7) selective cathepsin X inhibitors were tested in vitro. Selective cathepsin X inhibitors decreased the viability of patient-derived GBM cells as well as macrophages and microglia that were cultured in conditioned media of GBM cells. We next examined the expression pattern of neuron-specific enzyme γ-enolase, which is the target of cathepsin X. We found that there was a correlation between high proteolytic activity of cathepsin X and C-terminal cleavage of γ-enolase and that cathepsin X and γ-enolase were colocalized in GBM tissues, preferentially in GBM-associated macrophages and microglia. Taken together, our results on patient-derived material suggest that cathepsin X is involved in GBM progression and is a potential target for therapeutic approaches against GBM.     

Gal3 Plays a Deleterious Role in a Mouse Model of Endotoxemia

Lipopolysaccharide (LPS)-induced endotoxemia induces an acute systemic inflammatory response that mimics some important features of sepsis, the disease with the highest mortality rate worldwide. In this work, we have analyzed a murine model of endotoxemia based on a single intraperitoneal injection of 5 mg/kg of LPS. We took advantage of galectin-3 (Gal3) knockout mice and found that the absence of Gal3 decreased the mortality rate oflethal endotoxemia in the first 80 h after the administration of LPS, along with a reduction in the tissular damage in several organs measured by electron microscopy. Using flow cytometry, we demonstrated that, in control conditions, peripheral immune cells, especially monocytes, exhibited high levels of Gal3, which were early depleted in response to LPS injection, thus suggesting Gal3 release under endotoxemia conditions. However, serum levels of Gal3 early decreased in response to LPS challenge (1 h), an indication that Gal3 may be extravasated to peripheral organs. Indeed, analysis of Gal3 in peripheral organs revealed a robust up-regulation of Gal3 36 h after LPS injection. Taken together, these results demonstrate the important role that Gal3 could play in the development of systemic inflammation, a well-established feature of sepsis, thus opening new and promising therapeutic options for these harmful conditions.     

COVID-19 and Lung Mast Cells: The Kallikrein–Kinin Activation Pathway

Mast cells (MCs) have relevant participation in inflammatory and vascular hyperpermeability events, responsible for the action of the kallikrein–kinin system (KKS), that affect patients inflicted by the severe form of COVID-19. Given a higher number of activated MCs present in COVID-19 patients and their association with vascular hyperpermeability events, we investigated the factors that lead to the activation and degranulation of these cells and their harmful effects on the alveolar septum environment provided by the action of its mediators. Therefore, the pyroptotic processes throughout caspase-1 (CASP-1) and alarmin interleukin-33 (IL-33) secretion were investigated, along with the immunoexpression of angiotensin-converting enzyme 2 (ACE2), bradykinin receptor B1 (B1R) and bradykinin receptor B2 (B2R) on post-mortem lung samples from 24 patients affected by COVID-19. The results were compared to 10 patients affected by H1N1pdm09 and 11 control patients. As a result of the inflammatory processes induced by SARS-CoV-2, the activation by immunoglobulin E (IgE) and degranulation of tryptase, as well as Toluidine Blue metachromatic (TB)-stained MCs of the interstitial and perivascular regions of the same groups were also counted. An increased immunoexpression of the tissue biomarkers CASP-1, IL-33, ACE2, B1R and B2R was observed in the alveolar septum of the COVID-19 patients, associated with a higher density of IgE⁺ MCs, tryptase⁺ MCs and TB-stained MCs, in addition to the presence of intra-alveolar edema. These findings suggest the direct correlation of MCs with vascular hyperpermeability, edema and diffuse alveolar damage (DAD) events that affect patients with a severe form of this disease. The role of KKS activation in events involving the exacerbated increase in vascular permeability and its direct link with the conditions that precede intra-alveolar edema, and the consequent DAD, is evidenced. Therapy with drugs that inhibit the activation/degranulation of MCs can prevent the worsening of the prognosis and provide a better outcome for the patient.