Hydrogen Peroxide-Preconditioned Human Adipose-Derived Stem Cells Enhance the Recovery of Oligodendrocyte-Like Cells after Oxidative Stress-Induced Damage

Oxidative stress associated with neuroinflammation is a key process involved in the pathophysiology of neurodegenerative diseases, and therefore, has been proposed as a crucial target for new therapies. Recently, the therapeutic potential of human adipose-derived stem cells (hASCs) has been investigated as a novel strategy for neuroprotection. These cells can be preconditioned by exposing them to mild stress in order to improve their response to oxidative stress. In this study, we evaluate the therapeutic potential of hASCs preconditioned with low doses of H₂O₂ (called HC016 cells) to overcome the deleterious effect of oxidative stress in an in vitro model of oligodendrocyte-like cells (HOGd), through two strategies: i, the culture of oxidized HOGd with HC016 cell-conditioned medium (CM), and ii, the indirect co-culture of oxidized HOGd with HC016 cells, which had or had not been exposed to oxidative stress. The results demonstrated that both strategies had reparative effects, oxidized HC016 cell co-culture being the one associated with the greatest recovery of the damaged HOGd, increasing their viability, reducing their intracellular reactive oxygen species levels and promoting their antioxidant capacity. Taken together, these findings support the view that HC016 cells, given their reparative capacity, might be considered an important breakthrough in cell-based therapies.     

Circulating Insulin-Like Growth Factor I is Involved in the Effect of High Fat Diet on Peripheral Amyloid β Clearance

Obesity is a risk factor for Alzheimer’s disease (AD), but underlying mechanisms are not clear. We analyzed peripheral clearance of amyloid β (Aβ) in overweight mice because its systemic elimination may impact brain Aβ load, a major landmark of AD pathology. We also analyzed whether circulating insulin-like growth factor I (IGF-I) intervenes in the effects of overweight as this growth factor modulates brain Aβ clearance and is increased in the serum of overweight mice. Overweight mice showed increased Aβ accumulation by the liver, the major site of elimination of systemic Aβ, but unaltered brain Aβ levels. We also found that Aβ accumulation by hepatocytes is stimulated by IGF-I, and that mice with low serum IGF-I levels show reduced liver Aβ accumulation—ameliorated by IGF-I administration, and unchanged brain Aβ levels. In the brain, IGF-I favored the association of its receptor (IGF-IR) with the Aβ precursor protein (APP), and at the same time, stimulated non-amyloidogenic processing of APP in astrocytes, as indicated by an increased sAPPα/sAPPβ ratio after IGF-I treatment. Since serum IGF-I enters into the brain in an activity-dependent manner, we analyzed in overweight mice the effect of brain activation by environmental enrichment (EE) on brain IGF-IR phosphorylation and its association to APP, as a readout of IGF-I activity. After EE, significantly reduced brain IGF-IR phosphorylation and APP/IGF-IR association were found in overweight mice as compared to lean controls. Collectively, these results indicate that a high-fat diet influences peripheral clearance of Aβ without affecting brain Aβ load. Increased serum IGF-I likely contributes to enhanced peripheral Aβ clearance in overweight mice, without affecting brain Aβ load probably because its brain entrance is reduced.     

Recovery of vinyl chloride from by-streams of polyvinyl chloride production by TPSA in a multitubular adsorber

This work aims at developing an efficient and feasible adsorption-based separation process for the separation of vinyl chloride and nitrogen, on activated carbon, by employing a multitubular packed bed geometry, with adsorbent material inside the tubes. Using this geometry, a 2-dimensional mathematical model of a temperature pressure swing adsorption process was used to developed a 6-step three multitubular adsorbers system capable of separating and purifying an industrial scale gas stream of a 40:60% (v/v) vinyl chloride/nitrogen mixture into a 95% (v/v) vinyl chloride stream and a nitrogen stream with a vinyl chloride limit concentration of 8 ppm (w/w). The process reported energy consumption of 4.88 × 10⁶ J/kg_VCM and recovery capacity of 24.35 kg_VCM/(m³_unit h). The multitubular geometry enabled the use of lower adsorbent loads, shorter cycle times, and lower regeneration temperatures. An equivalent 1-dimensional model has also shown to satisfactorily estimate the performance of the current equipment.     

Dry Fractionation of Cupuassu (Theobroma grandiflorum) Fat: Physical–Chemical Properties and Polymorphic Behavior

Physical chemical properties of cupuassu fat were modified by dry fractionation. Stearin and olein fractions were obtained at 29, 26, and 24 °C. Polymorphic behavior of unfractionated cupuassu fat (UCF) and its fractions were studied in situ by small-angle (SAXS) and wide-angle (WAXS) X-ray scattering using synchrotron light. Polymorphic transitions were followed in real time tempering samples with a thermal cycle. For UCF, the main polymorphic form crystallized under selected conditions was the β’₂. α and β’₁-forms appeared in trace amounts. β₂-form was obtained after storage at 25 °C for 3 months. Stearins obtained at 26 (S-26) and 24 °C (S-24) showed a similar polymorphic behavior. However, S-26 with improved physical properties might be more suitable for chocolate production or as a trans-fat alternative than UCF. Stearin fraction obtained at 29 °C (S-29) had a complex polymorphic behavior. The α-form was the first polymorphic form detected followed by β’₂-form. There was a polymorphic transition from α to β’₁-form but no transition between β’-forms. They were independent to each other showing fractionation in two different solid solutions. Increased contents of the triacylglycerols (TAG) SOA and SOB together with lower contents of SOO compared to UCF led to co-crystallization because there was no complete compatibility among all TAG present in S-29. β₁-form crystallized after storage forming crystals with a double-layer arrangement and a characteristic morphology. This form could be useful for accelerating crystallization process in melted liquid systems.     

Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.     

Screening of lactic acid bacteria for fermentation of minced wastes of Argentinean hake (Merluccius hubbsi)

Sixteen strains of lactic acid bacteria were evaluated for their capacity of acidification of Merluccius hubbsi fish wastes obtained from a processing factory. Only three lactobacilli (Lactobacillus buchneri B-1837, Lactobacillus arizonensis B-14768 and Lactobacillus plantarum B-4496) were able to reduce the pH value to 4.0 or below when using glucose or sucrose as carbon source. Either with only 25 g l^?1 of glucose or sucrose, L. arizonensis B-14768 reduced the pH to 3.8 ± 0.2 within 24 h of fermentation. The acid tolerance test (pH 3.0 at 37 °C) for the strains presented D_pH3-values of 192, 383 and 767 min for L. buchneri, L. plantarum and L. arizonensis, respectively. However, at a lower pH value (pH 2.0) only L. arizonensis was significantly recovered after 45 min of exposure (D_pH2 68 min). Considering together the acidification capacity, the tolerance to other stresses (heat and bile salts) and the lower optimum temperature for the process, L. arizonensis is described as a suitable strain for M. hubbsi silage; constituting a promissory alternative for fish fermentation at location with temperate or cold climes.     

The cationic polymerization of α-methylstyrene in liquid sulfur dioxide initiated by the HI/I2 system

The polymerization of α-methylstyrene (αMeSty) initiated by HI/I₂ or HI in the presence of liquid sulfur dioxide has been investigated. The number-average molecular weight increased with the monomer concentration for reactions initiated by the HI/I₂ system. I₂ also participates in the initiation process, increasing the number-average polymer chain at higher monomer concentration. HI alone is also able to initiate the polymerization of αMeSty in the presence of SO₂. With this initiator, transfer reaction can be minimized in systems containing low amount of SO₂. Received: 19 December 1996/Revised: 27 January 1997/Accepted 29 January 1997     

Variability of the Pull-off Technique for Adhesion Strength Evaluation on Ceramic Tile Claddings

The periodic assessment of claddings adhesion during the facade life cycle becomes an important preventive in-service issue. This paper discusses the pull-off test, an in-situ diagnosis technique, which characterizes the in-service performance of ceramic tile claddings, by measuring adherence resistance to tension. Adherence is one of the main required properties of external coating, not only for aesthetical reasons but also for safety purposes. Throughout this research, an experimental campaign is performed in laboratory and in-situ, analyzing the variability of the pull-off testing technique. In-situ tests have been undertaken in existing construction sites and test walls. The laboratory results were compared to the in-situ ones. Standards requirements were evaluated and different failure modes were verified. In this work the impact of several parameters is analyzed such as the use of metallic discs with different thickness levels, geometries, and dimensions; the location of the testing at different heights; and the use of different dynamometer equipment. The main conclusion of this work is in order to reduce the uncertainty of the in-service diagnosis used for decision process of facade interventions, the previous parameters should be taking into account despite pull-off being a standardized technique.